[PATCH 09/14] qla2xxx: Add error handling for PLOGI ELS passthrough

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <qutran@xxxxxxxxxxx>

Add error handling logic to ELS Passthrough relating to NVME
devices. Current code does not parse error code to take proper
recovery action, instead it re-login with the same login parameters
that encountered the error. Ex: nport handle collision.

Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_iocb.c | 95 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5c279449ca1c..840c3bf2a364 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2765,6 +2765,10 @@ qla2x00_els_dcmd2_sp_done(void *ptr, int res)
 	struct scsi_qla_host *vha = sp->vha;
 	struct event_arg ea;
 	struct qla_work_evt *e;
+	struct fc_port *conflict_fcport;
+	port_id_t cid;	/* conflict Nport id */
+	u32 *fw_status = sp->u.iocb_cmd.u.els_plogi.fw_status;
+	u16 lid;
 
 	ql_dbg(ql_dbg_disc, vha, 0x3072,
 	    "%s ELS done rc %d hdl=%x, portid=%06x %8phC\n",
@@ -2776,14 +2780,99 @@ qla2x00_els_dcmd2_sp_done(void *ptr, int res)
 	if (sp->flags & SRB_WAKEUP_ON_COMP)
 		complete(&lio->u.els_plogi.comp);
 	else {
-		if (res) {
-			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
-		} else {
+		switch (fw_status[0]) {
+		case CS_DATA_UNDERRUN:
+		case CS_COMPLETE:
 			memset(&ea, 0, sizeof(ea));
 			ea.fcport = fcport;
 			ea.rc = res;
 			ea.event = FCME_ELS_PLOGI_DONE;
 			qla2x00_fcport_event_handler(vha, &ea);
+			break;
+		case CS_IOCB_ERROR:
+			switch (fw_status[1]) {
+			case LSC_SCODE_PORTID_USED:
+				lid = fw_status[2] & 0xffff;
+				qlt_find_sess_invalidate_other(vha,
+				    wwn_to_u64(fcport->port_name),
+				    fcport->d_id, lid, &conflict_fcport);
+				if (conflict_fcport) {
+					/*
+					 * Another fcport shares the same
+					 * loop_id & nport id; conflict
+					 * fcport needs to finish cleanup
+					 * before this fcport can proceed
+					 * to login.
+					 */
+					conflict_fcport->conflict = fcport;
+					fcport->login_pause = 1;
+					ql_dbg(ql_dbg_disc, vha, 0x20ed,
+					    "%s %d %8phC pid %06x inuse with lid %#x post gidpn\n",
+					    __func__, __LINE__,
+					    fcport->port_name,
+					    fcport->d_id.b24, lid);
+				} else {
+					ql_dbg(ql_dbg_disc, vha, 0x20ed,
+					    "%s %d %8phC pid %06x inuse with lid %#x sched del\n",
+					    __func__, __LINE__,
+					    fcport->port_name,
+					    fcport->d_id.b24, lid);
+					qla2x00_clear_loop_id(fcport);
+					set_bit(lid, vha->hw->loop_id_map);
+					fcport->loop_id = lid;
+					fcport->keep_nport_handle = 0;
+					qlt_schedule_sess_for_deletion(fcport);
+				}
+				break;
+
+			case LSC_SCODE_NPORT_USED:
+				cid.b.domain = (fw_status[2] >> 16) & 0xff;
+				cid.b.area   = (fw_status[2] >>  8) & 0xff;
+				cid.b.al_pa  = fw_status[2] & 0xff;
+				cid.b.rsvd_1 = 0;
+
+				ql_dbg(ql_dbg_disc, vha, 0x20ec,
+				    "%s %d %8phC lid %#x in use with pid %06x post gnl\n",
+				    __func__, __LINE__, fcport->port_name,
+				    fcport->loop_id, cid.b24);
+				set_bit(fcport->loop_id,
+				    vha->hw->loop_id_map);
+				fcport->loop_id = FC_NO_LOOP_ID;
+				qla24xx_post_gnl_work(vha, fcport);
+				break;
+
+			case LSC_SCODE_NOXCB:
+				vha->hw->exch_starvation++;
+				if (vha->hw->exch_starvation > 5) {
+					ql_log(ql_log_warn, vha, 0xd046,
+					    "Exchange starvation. Resetting RISC\n");
+					vha->hw->exch_starvation = 0;
+					set_bit(ISP_ABORT_NEEDED,
+					    &vha->dpc_flags);
+					qla2xxx_wake_dpc(vha);
+				}
+				/* fall through */
+			default:
+				ql_dbg(ql_dbg_disc, vha, 0x20eb,
+				    "%s %8phC cmd error fw_status 0x%x 0x%x 0x%x\n",
+				    __func__, sp->fcport->port_name,
+				    fw_status[0], fw_status[1], fw_status[2]);
+
+				fcport->flags &= ~FCF_ASYNC_SENT;
+				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+				break;
+			}
+			break;
+
+		default:
+			ql_dbg(ql_dbg_disc, vha, 0x20eb,
+			    "%s %8phC cmd error 2 fw_status 0x%x 0x%x 0x%x\n",
+			    __func__, sp->fcport->port_name,
+			    fw_status[0], fw_status[1], fw_status[2]);
+
+			sp->fcport->flags &= ~FCF_ASYNC_SENT;
+			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+			break;
 		}
 
 		e = qla2x00_alloc_work(vha, QLA_EVT_UNMAP);
-- 
2.12.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux