Linux SCSI

• Thread Index

• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] esp_scsi: Add support for FSC chip
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [EXT] [PATCH 0/4] scsi: qla2xxx: Bug fixes
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• [PATCH 2/2] sr_vendor: support Beurer GL50 evo CD-on-a-chip devices.
  • From: Diego Elio Pettenò <flameeyes@xxxxxxxxxxxxx>
• [PATCH 1/2] cdrom: respect device capabilities during opening action
  • From: Diego Elio Pettenò <flameeyes@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] scsi core: limit overhead of device_busy counter for SSDs
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH v5 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v5 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v5 0/2] Some esp_scsi updates
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH 1/1] scsi core: limit overhead of device_busy counter for SSDs
  • From: Sumanesh Samanta <sumanesh.samanta@xxxxxxxxxxxx>
• [PATCH v4 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v4 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] Some esp_scsi updates
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH 0/1] : limit overhead of device_busy counter for SSDs
  • From: Sumanesh Samanta <sumanesh.samanta@xxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Move work items to a stack list
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Move work items to a stack list
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [PATCH] cdrom: support Beurer GL50 evo CD-on-a-chip devices.
  • From: Jens Axboe <axboe@xxxxxxxxx>
• [PATCH] bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
  • From: Laurence Oberman <loberman@xxxxxxxxxx>
• [PATCH] scsi_debug: check if the max_queue parameter is valid
  • From: Maurizio Lombardi <mlombard@xxxxxxxxxx>
• [PATCH RFC V2 3/5] blk-mq: Facilitate a shared sbitmap per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC V2 5/5] scsi: hisi_sas: Switch v3 hw to MQ
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC V2 2/5] blk-mq: rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC V2 4/5] scsi: Add template flag 'host_tagset'
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC v2 1/5] blk-mq: Remove some unused function arguments
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC v2 0/5] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Move work items to a stack list
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH] scsi: lpfc: Move work items to a stack list
  • From: Daniel Wagner <dwagner@xxxxxxx>
• RE: [PATCH v2 2/4] scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 52/52] scsi: Drop the now obsolete driver_byte definitions
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 52/52] scsi: Drop the now obsolete driver_byte definitions
  • From: Martin Wilck <mwilck@xxxxxxx>
• Re: [PATCH 52/52] scsi: Drop the now obsolete driver_byte definitions
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 52/52] scsi: Drop the now obsolete driver_byte definitions
  • From: Martin Wilck <mwilck@xxxxxxx>
• Re: [PATCH 40/52] scsi: Kill DRIVER_SENSE
  • From: Martin Wilck <mwilck@xxxxxxx>
• Re: [PATCHv3 00/52] Revamp SCSI result values
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 8/9] aacraid: use scsi_host_busy_iter() in get_num_of_incomplete_fibs()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH RESEND 1/2] scsi: ufs: Enable hibern8 interrupt only during manual hibern8 in Cadence UFS.
  • From: sheebab <sheebab@xxxxxxxxxxx>
• [PATCH RESEND 2/2] scsi: ufs: Update L4 attributes on manual hibern8 exit in Cadence UFS.
  • From: sheebab <sheebab@xxxxxxxxxxx>
• [PATCH RESEND 0/2] scsi: ufs: hibern8 fixes
  • From: sheebab <sheebab@xxxxxxxxxxx>
• Re: [PATCH 7/9] aacraid: use scsi_host_busy_iter() in aac_wait_for_io_completion()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/9] scsi: add scsi_host_flush_commands() helper
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH v4 1/5] scsi: Adjust DBD setting in mode sense for caching mode page per LLD
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: bnx2i: fix potential use after free
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 6/8] qla2xxx: Fix memory leak when sending I/O fails
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] NCR5380: Add disconnect_mask module parameter
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] NCR5380: Unconditionally clear ICR after do_abort()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi_debug: num_tgts must be >= 0
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] NCR5380: Call scsi_set_resid() on command completion
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] lpfc: use hdwq assigned cpu for allocation
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH RESEND 0/2] scsi: ufs: hibern8 fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] SCSI: qla4xxx: fix double free bug
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: arcmsr: fix indentation issues
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V2 00/13] pm80xx : Updates for the driver version 0.1.39.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v5 0/7] UFS driver general fixes bundle 3
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCHv3 00/52] Revamp SCSI result values
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V2] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v2 2/4] scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH v2 0/4] UFS driver general fixes bundle 5
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH v2 4/4] scsi: ufs: Complete pending requests in host reset and restore path
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH V2] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 8/9] aacraid: use scsi_host_busy_iter() in get_num_of_incomplete_fibs()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 7/9] aacraid: use scsi_host_busy_iter() in aac_wait_for_io_completion()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/9] aacraid: use midlayer helper to terminate outstanding commands
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 3/9] dpt_i2o: use scsi_host_flush_commands() to abort outstanding commands
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/9] scsi: add scsi_host_flush_commands() helper
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/9] dpt_i2o: rename adpt_i2o_to_scsi() to adpt_i2o_scsi_complete()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 6/8] qla2xxx: Fix memory leak when sending I/O fails
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: James Smart <james.smart@xxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH -next] scsi: sd_zbc: Remove set but not used variable 'buflen'
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH v3 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] UFS driver general fixes bundle 5
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v2 4/4] scsi: ufs: Complete pending requests in host reset and restore path
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v2 3/4] scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v2 2/4] scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v2 1/4] scsi: ufs: Recheck bkops level if bkops is disabled
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [PATCH] lpfc: fixup out-of-bounds access during CPU hotplug
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH -next v2] scsi: qla2xxx: Use PTR_ERR_OR_ZERO() to simplify code
  • From: "zhengbin (A)" <zhengbin13@xxxxxxxxxx>
• [PATCH -next v2] scsi: qla2xxx: Use PTR_ERR_OR_ZERO() to simplify code
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH 4/4] scsi: core: don't limit per-LUN queue depth for SSD
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 3/4] scsi: sd: register request queue after sd_revalidate_disk is done
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 2/4] scsi: mpt3sas: use private counter for tracking inflight per-LUN commands
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 1/4] scsi: megaraid_sas: use private counter for tracking inflight per-LUN commands
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 0/4] scis: don't apply per-LUN queue depth for SSD
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V2] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• RE: [EXT] [PATCH v2 4/4] scsi: ufs: Complete pending requests in host reset and restore path
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH V2 13/13] pm80xx : Modified the logic to collect fatal dump.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 11/13] pm80xx : Controller fatal error through sysfs.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 09/13] pm80xx : Cleanup command when a reset times out.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• RE: [EXT] [PATCH v2 3/4] scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH 5/9] aacraid: use midlayer helper to terminate outstanding commands
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 4/9] aacraid: Do not wait for outstanding write commands on synchronize_cache
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 3/9] dpt_i2o: use scsi_host_flush_commands() to abort outstanding commands
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 8/9] aacraid: use scsi_host_busy_iter() in get_num_of_incomplete_fibs()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCHv4 0/9] scsi: remove legacy cmd_list implementation
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 7/9] aacraid: use scsi_host_busy_iter() in aac_wait_for_io_completion()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 9/9] scsi: Remove cmd_list functionality
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 1/9] dpt_i2o: rename adpt_i2o_to_scsi() to adpt_i2o_scsi_complete()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 6/9] scsi: add scsi_host_busy_iter()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 2/9] scsi: add scsi_host_flush_commands() helper
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH V2 02/13] pm80xx : Make phy enable completion as NULL.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 01/13] pm80xx : Fix for SATA device discovery.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• [PATCH] scsi: mvsas: remove not needed memset
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH] scsi: dpt_i2o: remove not needed memset
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH] scsi: pmcraid: remove not needed memset
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH] scsi: mpt3sas: remove not needed memset
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• RE: [PATCH v2 4/4] scsi: ufs: Complete pending requests in host reset and restore path
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v2 3/4] scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v2 2/4] scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 4/4] scsi: ufs: Complete pending requests in host reset and restore path
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] scsi: ufs: Recheck bkops level if bkops is disabled
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [Resend due to wrong mail address][PATCH v2 0/4] UFS driver general fixes bundle 5
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] scsi: ufs: Complete pending requests in host reset and restore path
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] scsi: ufs: Update VCCQ2 and VCCQ min/max voltage hard codes
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] scsi: ufs: Recheck bkops level if bkops is disabled
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] UFS driver general fixes bundle 5
  • From: Can Guo <cang@xxxxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: cang@xxxxxxxxxxxxxx
• [PATCH] scsi: smartpqi: add missed free_irq in suspend
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH -next] scsi: sd_zbc: Remove set but not used variable 'buflen'
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: megaraid_mbox: change the error level of crit to warning
  • From: Aditya Pakki <pakki001@xxxxxxx>
• RE: [EXT] [PATCH v5 7/7] scsi: ufs: Fix error handing during hibern8 enter
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH 2/5] dpt_i2o: use midlayer tcq implementation
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] scsi: core: only re-run queue in scsi_end_request() if device queue is busy
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 036/237] scsi: hisi_sas: Free slot later in slot_complete_vx_hw()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 045/237] scsi: ips: fix missing break in switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 051/237] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 052/237] scsi: isci: Change sci_controller_start_task's return type to sci_status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 064/237] scsi: dc395x: fix DMA API usage in sg_update_list
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 209/237] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 065/237] scsi: zorro_esp: Limit DMA transfers to 65535 bytes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 213/237] scsi: lpfc: Fix odd recovery in duplicate FLOGIs in point-to-point
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 063/237] scsi: dc395x: fix dma API usage in srb_done
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 214/237] scsi: lpfc: Correct loss of fc4 type on remote port address change
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 4/5] aacraid: use scsi_host_busy_iter() for traversing outstanding commands
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 2/5] dpt_i2o: use midlayer tcq implementation
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH AUTOSEL 4.19 212/237] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 211/237] scsi: megaraid_sas: Fix goto labels in error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 210/237] scsi: megaraid_sas: Fix msleep granularity
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 208/237] scsi: mpt3sas: Don't modify EEDPTagMode field setting on SAS3.5 HBA devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 207/237] scsi: mpt3sas: Fix Sync cache command failure during driver unload
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 054/237] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 053/237] scsi: bfa: Avoid implicit enum conversion in bfad_im_post_vendor_event
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 035/237] scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 034/237] scsi: hisi_sas: Feed back linkrate(max/min) when re-attached
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 027/150] scsi: ips: fix missing break in switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 032/150] scsi: isci: Change sci_controller_start_task's return type to sci_status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 031/150] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 033/150] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 039/150] scsi: dc395x: fix dma API usage in srb_done
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 040/150] scsi: dc395x: fix DMA API usage in sg_update_list
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 133/150] scsi: lpfc: Correct loss of fc4 type on remote port address change
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 18/99] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 19/99] scsi: isci: Change sci_controller_start_task's return type to sci_status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 23/99] scsi: dc395x: fix dma API usage in srb_done
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 84/99] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 83/99] scsi: mpt3sas: Fix Sync cache command failure during driver unload
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 85/99] scsi: megaraid_sas: Fix msleep granularity
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 14/77] scsi: ips: fix missing break in switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 18/77] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 17/77] scsi: isci: Change sci_controller_start_task's return type to sci_status
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 66/77] scsi: mpt3sas: Fix Sync cache command failure during driver unload
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 68/77] scsi: megaraid_sas: Fix msleep granularity
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 67/77] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 69/77] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 21/77] scsi: dc395x: fix DMA API usage in sg_update_list
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 20/77] scsi: dc395x: fix dma API usage in srb_done
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 16/77] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 86/99] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 24/99] scsi: dc395x: fix DMA API usage in sg_update_list
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 20/99] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 16/99] scsi: ips: fix missing break in switch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 132/150] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 131/150] scsi: megaraid_sas: Fix goto labels in error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 130/150] scsi: megaraid_sas: Fix msleep granularity
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 129/150] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 128/150] scsi: mpt3sas: Don't modify EEDPTagMode field setting on SAS3.5 HBA devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 127/150] scsi: mpt3sas: Fix Sync cache command failure during driver unload
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 090/237] scsi: hisi_sas: Fix NULL pointer dereference
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [scsi] 74eb6c22dc: suspend_stress.fail
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• [PATCH] NCR5380: Unconditionally clear ICR after do_abort()
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH] NCR5380: Add disconnect_mask module parameter
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH] NCR5380: Call scsi_set_resid() on command completion
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi_debug: num_tgts must be >= 0
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH] lpfc: use hdwq assigned cpu for allocation
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi_debug: num_tgts must be >= 0
  • From: Maurizio Lombardi <mlombard@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH -next] scsi: sd_zbc: Remove set but not used variable 'buflen'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH 5/5] scsi: Remove cmd_list functionality
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 4/5] aacraid: use scsi_host_busy_iter() for traversing outstanding commands
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 1/5] scsi: add scsi_host_busy_iter()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 3/5] dpt_i2o: rename adpt_i2o_to_scsi() to adpt_i2o_scsi_complete()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCHv3 0/5] scsi: remove legacy cmd_list implementation
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 2/5] dpt_i2o: use midlayer tcq implementation
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH RESEND 0/2] scsi: ufs: hibern8 fixes
  • From: sheebab <sheebab@xxxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 1/4] dpt_i2o: use midlayer tcq implementation
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH v5 7/7] scsi: ufs: Fix error handing during hibern8 enter
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v5 2/7] scsi: ufs-qcom: Add reset control support for host controller
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 2/4] dpt_i2o: make adpt_i2o_to_scsi() a void function
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 3/4] aacraid: use blk_mq_rq_busy_iter() for traversing outstanding commands
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 2/4] dpt_i2o: make adpt_i2o_to_scsi() a void function
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/4] dpt_i2o: use midlayer tcq implementation
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 3/4] aacraid: use blk_mq_rq_busy_iter() for traversing outstanding commands
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 4/4] scsi: Remove cmd_list functionality
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 1/4] dpt_i2o: use midlayer tcq implementation
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCHv2 0/4] scsi: remove legacy cmd_list implementation
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 2/4] dpt_i2o: make adpt_i2o_to_scsi() a void function
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCHv3 00/52] Revamp SCSI result values
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v5 1/7] scsi: ufs: Add device reset in link recovery path
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v5 7/7] scsi: ufs: Fix error handing during hibern8 enter
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v5 6/7] scsi: ufs: Abort gating if clock on request is pending
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v5 5/7] scsi: ufs: Fix irq return code
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v5 4/7] scsi: ufs: Fix register dump caused sleep in atomic context
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v5 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v5 2/7] scsi: ufs-qcom: Add reset control support for host controller
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v5 1/7] scsi: ufs: Add device reset in link recovery path
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v5 0/7] UFS driver general fixes bundle 3
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] esp_scsi: Add support for FSC chip
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] scsi: ufs: Fix error handing during hibern8 enter
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] scsi: ufs-qcom: Add reset control support for host controller
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH] storvsc: Properly set queue depth for scsi disk
  • From: longli@xxxxxxxxxxxxxxxxx
• [PATCH v3 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Some esp_scsi updates
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Some esp_scsi updates
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH] scsi: arcmsr: fix indentation issues
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] scsi_dh_rdac: avoid crash during rescan
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [EXT] [PATCH v1 5/5] scsi: ufs: Complete pending requests in host reset and restore path
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [PATCH v3] scsi: avoid potential deadloop in iscsi_if_rx func
  • From: "wubo (T)" <wubo40@xxxxxxxxxx>
• RE: [PATCH v4 7/7] scsi: ufs: Fix error handing during hibern8 enter
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v4 6/7] scsi: ufs: Abort gating if clock on request is pending
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v4 5/7] scsi: ufs: Fix irq return code
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH V2 10/13] pm80xx : Do not request 12G sas speeds.
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH V2 13/13] pm80xx : Modified the logic to collect fatal dump.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 12/13] pm80xx : Tie the interrupt name to the module instance.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 11/13] pm80xx : Controller fatal error through sysfs.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 10/13] pm80xx : Do not request 12G sas speeds.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 09/13] pm80xx : Cleanup command when a reset times out.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 08/13] pm80xx : Fix command issue sizing.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 07/13] pm80xx : Fix dereferencing dangling pointer.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 06/13] pm80xx : Increase timeout for pm80xx mpi_uninit_check.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 05/13] pm80xx : Squashed logging cleanup changes.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 04/13] pm80xx : Convert 'long' mdelay to msleep.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 03/13] pm80xx : Initialize variable used as return status.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 02/13] pm80xx : Make phy enable completion as NULL.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 00/13] pm80xx : Updates for the driver version 0.1.39.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 01/13] pm80xx : Fix for SATA device discovery.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH v4 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v4 2/7] scsi: ufs-qcom: Add reset control support for host controller
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: scsi: pmcraid: Use *_pool_zalloc rather than *_pool_alloc
  • From: "Gomonovych, Vasyl" <gomonovych@xxxxxxxxx>
• RE: [PATCH] SCSI: qla4xxx: fix double free bug
  • From: Manish Rangankar <mrangankar@xxxxxxxxxxx>
• Re: [PATCH] Revert "qla2xxx: Fix Nport ID display value"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [scsi] 74eb6c22dc: suspend_stress.fail
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [EXT] [PATCH v1 5/5] scsi: ufs: Complete pending requests in host reset and restore path
  • From: cang@xxxxxxxxxxxxxx
• Re: [EXT] [PATCH v1 5/5] scsi: ufs: Complete pending requests in host reset and restore path
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] esp_scsi: Add support for FSC chip
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• RE: [EXT] [PATCH v1 5/5] scsi: ufs: Complete pending requests in host reset and restore path
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH v1 1/5] scsi: ufs: Recheck bkops level if bkops is disabled
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH 0/4] scsi: qla2xxx: Bug fixes
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v3] scsi: avoid potential deadloop in iscsi_if_rx func
  • From: Lee Duncan <LDuncan@xxxxxxxx>
• Re: [scsi] 74eb6c22dc: suspend_stress.fail
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [EXT] [PATCH v4 3/5] scsi: ufs: Release clock if DMA map fails
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] Revert "qla2xxx: Fix Nport ID display value"
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RFC 2/5] blk-mq: rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RFC 1/5] blk-mq: Remove some unused function arguments
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH RFC 5/5] scsi: hisi_sas: Switch v3 hw to MQ
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC 4/5] scsi: Add template flag 'host_tagset'
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC 0/5] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC 3/5] blk-mq: Facilitate a shared tags per tagset
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC 2/5] blk-mq: rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH RFC 1/5] blk-mq: Remove some unused function arguments
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] Zoned block device enhancements and zone report rework
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH v4 7/7] scsi: ufs: Fix error handing during hibern8 enter
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 6/7] scsi: ufs: Abort gating if clock on request is pending
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 5/7] scsi: ufs: Fix irq return code
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 4/7] scsi: ufs: Fix register dump caused sleep in atomic context
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 3/7] scsi: ufs: Fix up auto hibern8 enablement
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 2/7] scsi: ufs-qcom: Add reset control support for host controller
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 1/7] scsi: ufs: Add device reset in link recovery path
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 0/7] UFS driver general fixes bundle 3
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 5/5] scsi: ufs: Do not free irq in suspend
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 4/5] scsi: ufs: Do not clear the DL layer timers
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 3/5] scsi: ufs: Release clock if DMA map fails
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 2/5] scsi: ufs: Use DBD setting in mode sense
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 1/5] scsi: Adjust DBD setting in mode sense for caching mode page per LLD
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 0/5] UFS driver general fixes bundle 1
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: Please consider mainline commit 9393c8de628c for stable
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH 0/2] SG_NONE fix and cleanup
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] scsi: avoid potential deadloop in iscsi_if_rx func
  • From: Lee Duncan <LDuncan@xxxxxxxx>
• Re: [PATCH v3 1/5] scsi: Adjust DBD setting in mode sense for caching mode page per LLD
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH] scsi: lpfc: Move work items to a stack list
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] scsi: nsp_cs: MODULE_LICENSE clean up and compile test
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 1/5] scsi: Adjust DBD setting in mode sense for caching mode page per LLD
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1 5/5] scsi: ufs: Complete pending requests in host reset and restore path
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH v1 3/5] scsi: ufs: Update VCCQ2 and VCCQ min voltage hard codes
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH v2 0/9] Zoned block device enhancements and zone report rework
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH -next] scsi: ufshcd: Remove dev_err() on platform_get_irq() failure
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: csiostor: Remove set but not used variable 'rln'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane)
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1 5/5] scsi: ufs: Complete pending requests in host reset and restore path
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 2/2] scsi: ufs: Add driver for TI wrapper for Cadence UFS IP
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 187/209] scsi: arcmsr: clean up clang warning on extraneous parentheses
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 0/4] hisi_sas: Some misc minor patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Zoned block device enhancements and zone report rework
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v2 0/2] Two small patches for UFS
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/2] scsi: ufs: Add driver for TI wrapper for Cadence UFS IP
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/6] lpfc: Update lpfc to revision 12.6.0.1
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: avoid crash in qlt_handle_abts_completion() if mcmd == NULL
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] scsi: avoid potential deadloop in iscsi_if_rx func
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Please consider mainline commit 9393c8de628c for stable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1 2/5] scsi: ufs: Add new bit field PA_INIT to UECDL register
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: cang@xxxxxxxxxxxxxx
• Re: [PATCH 2/2] esp_scsi: Add support for FSC chip
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi_dh_rdac: avoid crash during rescan
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] esp_scsi: Add support for FSC chip
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane)
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] scsi: ufs: fix potential bug which ends in system hang-up
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 1/2] scsi: ufs: print helpful hint when response size exceed buffer size
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 0/2] Two small patches for UFS
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH] scsi_dh_rdac: avoid crash during rescan
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] esp_scsi: Add support for FSC chip
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH 0/2] Some esp_scsi updates
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] lpfc: Update lpfc version to 12.6.0.2
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 4/6] lpfc: Initialize cpu_map for not present cpus
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 3/6] lpfc: fix inlining of lpfc_sli4_cleanup_poll_list()
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 2/6] lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH 1/6] lpfc: fix: Coverity: lpfc_get_scsi_buf_s3(): Null pointer dereferences
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH v2] zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane)
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH v5 4/4] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 3/4] ufs: Use blk_{get,put}_request() to allocate and free TMFs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 2/4] ufs: Avoid busy-waiting by eliminating tag conflicts
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 1/4] ufs: Serialize error handling and command submission
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 0/4] Simplify and optimize the UFS driver
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [EXT] [PATCH v4 1/3] ufs: Avoid busy-waiting by eliminating tag conflicts
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [RESEND PATCH v1 2/2] scsi: ufs: fix potential bug which ends in system hang-up
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [RESEND PATCH v1 1/2] scsi: ufs: print helpful hint when response size exceed buffer size
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi_dh_rdac: avoid crash during rescan
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [EXT] Re: [PATCH v4 3/3] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [EXT] Re: [PATCH v4 3/3] ufs: Simplify the clock scaling mechanism implementation
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH 6/6] scsi: hisi_sas: Expose multiple hw queues for v3 as experimental
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 6/6] scsi: hisi_sas: Expose multiple hw queues for v3 as experimental
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] [PATCH v4 1/3] ufs: Avoid busy-waiting by eliminating tag conflicts
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH 6/6] scsi: hisi_sas: Expose multiple hw queues for v3 as experimental
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 2/4] scsi: hisi_sas: Return directly if init hardware failed
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 2/4] scsi: hisi_sas: Return directly if init hardware failed
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 3/4] scsi: hisi_sas: Relocate call to hisi_sas_debugfs_exit()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 4/4] scsi: hisi_sas: Stop converting a bool into a bool
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH 1/4] scsi: hisi_sas: Check sas_port before using it
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 0/4] hisi_sas: Some misc minor patches
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v4 3/3] ufs: Simplify the clock scaling mechanism implementation
  • From: cang@xxxxxxxxxxxxxx
• RE: [PATCH v1 4/5] scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v1 3/5] scsi: ufs: Update VCCQ2 and VCCQ min voltage hard codes
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v1 2/5] scsi: ufs: Add new bit field PA_INIT to UECDL register
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v1 1/5] scsi: ufs: Recheck bkops level if bkops is disabled
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v3 2/2] scsi: ufs: Add driver for TI wrapper for Cadence UFS IP
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v4 0/3] Simplify and optimize the UFS driver
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH] Revert "qla2xxx: Fix Nport ID display value"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [RESEND PATCH v1 0/2] Two small patches for UFS
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [RESEND PATCH v1 2/2] scsi: ufs: fix potential bug which ends in system hang-up
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [RESEND PATCH v1 1/2] scsi: ufs: print helpful hint when response size exceed buffer size
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [RESEND PATCH v1 0/2] Two small patches for UFS
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH] Add prctl support for controlling mem reclaim V4
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• [PATCH 6/6] lpfc: Update lpfc version to 12.6.0.2
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 5/6] lpfc: revise nvme max queues to be hdwq count
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 4/6] lpfc: Initialize cpu_map for not present cpus
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 3/6] lpfc: fix inlining of lpfc_sli4_cleanup_poll_list()
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 2/6] lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 1/6] lpfc: fix: Coverity: lpfc_get_scsi_buf_s3(): Null pointer dereferences
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 0/6] lpfc: Update lpfc to revision 12.6.0.1
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.4-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v4 3/3] ufs: Simplify the clock scaling mechanism implementation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 1/3] ufs: Avoid busy-waiting by eliminating tag conflicts
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 2/3] ufs: Use blk_{get,put}_request() to allocate and free TMFs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 0/3] Simplify and optimize the UFS driver
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: qla2xxx: avoid crash in qlt_handle_abts_completion() if mcmd == NULL
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• [GIT PULL] SCSI fixes for 5.4-rc7
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi_dh_rdac: avoid crash during rescan
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH v3 2/2] scsi: ufs-qcom: enter and exit hibern8 during clock scaling
  • From: Pedro Sousa <PedroM.Sousa@xxxxxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V3
  • From: Michael Christie <mchristi@xxxxxxxxxx>
• RE: [PATCH v3 1/2] scsi: ufs: export hibern8 entry and exit
  • From: Pedro Sousa <PedroM.Sousa@xxxxxxxxxxxx>
• Re: [PATCH 6/6] scsi: hisi_sas: Expose multiple hw queues for v3 as experimental
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH RFC v3 3/3] ufs: Simplify the clock scaling mechanism implementation
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH RFC v3 0/3] Simplify and optimize the UFS driver
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH] cdrom: support Beurer GL50 evo CD-on-a-chip devices.
  • From: Diego Elio Pettenò <flameeyes@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "qla2xxx: Fix Nport ID display value"
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• [PATCH] scsi_dh_rdac: avoid crash during rescan
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V3
  • From: Michal Hocko <mhocko@xxxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH v2 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 4/9] block: Remove partition support for zoned block devices
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v2 9/9] block: rework zone reporting
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 7/9] null_blk: Add zone_nr_conv to features
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 6/9] null_blk: clean up report zones
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 5/9] null_blk: clean up the block device operations
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 4/9] block: Remove partition support for zoned block devices
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 3/9] block: Simplify report zones execution
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 2/9] block: cleanup the !zoned case in blk_revalidate_disk_zones
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 1/9] block: Enhance blk_revalidate_disk_zones()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 0/9] Zoned block device enhancements and zone report rework
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 127/191] scsi: libsas: always unregister the old device if going to discover new
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 168/191] scsi: NCR5380: Clear all unissued commands on host reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 169/191] scsi: NCR5380: Have NCR5380_select() return a bool
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 171/191] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 172/191] scsi: NCR5380: Check for invalid reselection target
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 174/191] scsi: NCR5380: Don't call dsprintk() following reselection interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 173/191] scsi: NCR5380: Don't clear busy flag when abort fails
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 176/191] scsi: NCR5380: Check for bus reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 094/109] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 099/109] scsi: NCR5380: Check for bus reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 071/109] scsi: libsas: always unregister the old device if going to discover new
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 097/109] scsi: NCR5380: Don't call dsprintk() following reselection interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 092/109] scsi: NCR5380: Have NCR5380_select() return a bool
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 091/109] scsi: NCR5380: Clear all unissued commands on host reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 098/109] scsi: NCR5380: Handle BUS FREE during reselection
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 095/109] scsi: NCR5380: Check for invalid reselection target
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 093/109] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 096/109] scsi: NCR5380: Don't clear busy flag when abort fails
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 45/66] scsi: libsas: always unregister the old device if going to discover new
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 56/66] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 59/66] scsi: NCR5380: Don't call dsprintk() following reselection interrupt
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 55/66] scsi: NCR5380: Clear all unissued commands on host reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 57/66] scsi: NCR5380: Check for invalid reselection target
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 60/66] scsi: NCR5380: Handle BUS FREE during reselection
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 33/40] scsi: libsas: always unregister the old device if going to discover new
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 58/66] scsi: NCR5380: Don't clear busy flag when abort fails
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 175/191] scsi: NCR5380: Handle BUS FREE during reselection
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 170/191] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V3
  • From: Ilya Dryomov <idryomov@xxxxxxxxx>
• [PATCH] zorro_esp: increase maximum dma length to 65536 bytes
  • From: Kars de Jong <jongk@xxxxxxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH] Revert "qla2xxx: Fix Nport ID display value"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [dm-devel] [PATCH 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [dm-devel] [PATCH 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 3/3] lpfc: Fix lpfc_cpumask_of_node_init()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] target: core: Prevent memory reclaim recursion
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: Fix scsi_get/set_resid() interface
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] lpfc: Fix lpfc_cpumask_of_node_init()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/3] Three lpfc fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/2] qla2xxx fc4_type_priority handling
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] Two qla2xxx fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] target: core: Prevent memory reclaim recursion
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 0/8] qla2xxx: Bug Fixes for the driver
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V3
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [EXT] [PATCH 4/8] qla2xxx: Fix driver unload hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [EXT] [PATCH 4/8] qla2xxx: Fix driver unload hang
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2] lpfc: Fix lpfc_cpumask_of_node_init()
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH 3/3] lpfc: Fix lpfc_cpumask_of_node_init()
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH 2/3] lpfc: Fix a kernel warning triggered by lpfc_sli4_enable_intr()
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH 1/3] lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq()
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH] Add prctl support for controlling mem reclaim V3
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [dm-devel] [PATCH 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/9] block: cleanup the !zoned case in blk_revalidate_disk_zones
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH 7/9] null_blk: Add zone_nr_conv to features
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH 6/9] null_blk: clean up report zones
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH 5/9] null_blk: clean up the block device operations
  • From: Chaitanya Kulkarni <Chaitanya.Kulkarni@xxxxxxx>
• Re: [PATCH v2] target: core: Prevent memory reclaim recursion
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 0/2] scsi: ufs: Add driver for TI wrapper for Cadence UFS IP
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 2/2] scsi: ufs: Add driver for TI wrapper for Cadence UFS IP
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 1/2] dt-bindings: ufs: ti,j721e-ufs.yaml: Add binding for TI UFS wrapper
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v2] target: core: Prevent memory reclaim recursion
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH v2] scsi: Fix scsi_get/set_resid() interface
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] target: core: Prevent memory reclaim recursion
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] target: core: Prevent memory reclaim recursion
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH 9/9] block: rework zone reporting
  • From: Mike Snitzer <snitzer@xxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Jens Axboe <axboe@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 137/205] scsi: qla2xxx: Use correct qpair for ABTS/CMD
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 138/205] scsi: qla2xxx: Fix iIDMA error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 140/205] scsi: qla2xxx: Terminate Plogi/PRLI if WWN is 0
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 139/205] scsi: qla2xxx: Defer chip reset until target mode is enabled
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 142/205] scsi: qla2xxx: Increase abort timeout value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 141/205] scsi: qla2xxx: Fix deadlock between ATIO and HW lock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 145/205] scsi: qla2xxx: Fix dropped srb resource.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 146/205] scsi: qla2xxx: Fix duplicate switch's Nport ID entries
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 144/205] scsi: qla2xxx: Fix port speed display on chip reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 147/205] scsi: lpfc: Fix GFT_ID and PRLI logic for RSCN
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 148/205] scsi: lpfc: Correct invalid EQ doorbell write on if_type=6
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 150/205] scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 152/205] scsi: pm80xx: Corrected dma_unmap_sg() parameter
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 153/205] scsi: pm80xx: Fixed system hang issue during kexec boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 199/205] scsi: ufshcd: Fix NULL pointer dereference for in ufshcd_init
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 069/103] scsi: qla2xxx: Defer chip reset until target mode is enabled
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 070/103] scsi: qla2xxx: Fix dropped srb resource.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 075/103] scsi: pm80xx: Fixed system hang issue during kexec boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 074/103] scsi: pm80xx: Corrected dma_unmap_sg() parameter
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 068/103] scsi: qla2xxx: Fix iIDMA error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 41/64] scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 43/64] scsi: pm80xx: Corrected dma_unmap_sg() parameter
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 44/64] scsi: pm80xx: Fixed system hang issue during kexec boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 28/44] scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 31/44] scsi: pm80xx: Fixed system hang issue during kexec boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 30/44] scsi: pm80xx: Corrected dma_unmap_sg() parameter
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 072/103] scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 071/103] scsi: lpfc: Fix errors in log messages.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 149/205] scsi: lpfc: Fix errors in log messages.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 143/205] scsi: qla2xxx: Check for Register disconnect
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH v2] target: core: Prevent memory reclaim recursion
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH] target: core: Prevent memory reclaim recursion
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v1 5/5] scsi: ufs: Complete pending requests in host reset and restore path
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 4/5] scsi: ufs: Avoid messing up the compl_time_stamp of lrbs
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 3/5] scsi: ufs: Update VCCQ2 and VCCQ min voltage hard codes
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 2/5] scsi: ufs: Add new bit field PA_INIT to UECDL register
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 1/5] scsi: ufs: Recheck bkops level if bkops is disabled
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 0/5] UFS driver general fixes bundle 5
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] block: Remove partition support for zoned block devices
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 9/9] block: rework zone reporting
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 7/9] null_blk: Add zone_nr_conv to features
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 6/9] null_blk: clean up report zones
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 5/9] null_blk: clean up the block device operations
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 4/9] block: Remove partition support for zoned block devices
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 3/9] block: Simplify report zones execution
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/9] block: cleanup the !zoned case in blk_revalidate_disk_zones
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/9] block: Enhance blk_revalidate_disk_zones()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [dm-devel] [PATCH 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [dm-devel] [PATCH 4/9] block: Remove partition support for zoned block devices
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [dm-devel] [PATCH 1/9] block: Enhance blk_revalidate_disk_zones()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [bug report] scsi: lpfc: Add registration for CPU Offline/Online events
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 9/9] block: rework zone reporting
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 7/9] null_blk: Add zone_nr_conv to features
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 6/9] null_blk: clean up report zones
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 5/9] null_blk: clean up the block device operations
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 4/9] block: Remove partition support for zoned block devices
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 3/9] block: Simplify report zones execution
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 2/9] block: cleanup the !zoned case in blk_revalidate_disk_zones
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 1/9] block: Enhance blk_revalidate_disk_zones()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 0/9] Zoned block device enhancements and zone report rework
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v2 2/2] scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 1/2] scsi: qla2xxx: initialize fc4_type_priority
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• [PATCH v2 2/2] scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• [PATCH v2 0/2] qla2xxx fc4_type_priority handling
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• Re: [PATCH 2/2] scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• Re: [PATCH 2/2] scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/2] scsi: qla2xxx: initialize fc4_type_priority
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/2] scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/2] scsi: qla2xxx: initialize fc4_type_priority
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• Re: [PATCH 2/2] scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• Re: [PATCH 0/4] scsi: qla2xxx: Bug fixes
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: [PATCH 4/8] qla2xxx: Fix driver unload hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 5/8] qla2xxx: Fix double scsi_done for abort path
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 4/8] qla2xxx: Fix driver unload hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [EXT] [PATCH RFC v3 2/3] ufs: Use blk_{get,put}_request() to allocate and free TMFs
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH RFC v3 1/3] ufs: Avoid busy-waiting by eliminating tag conflicts
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH 2/2] scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• Re: [PATCH 4/8] qla2xxx: Fix driver unload hang
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 1/2] scsi: qla2xxx: initialize fc4_type_priority
  • From: Martin Wilck <Martin.Wilck@xxxxxxxx>
• Re: [EXT] [PATCH 2/8] qla2xxx: Do command completion on abort timeout
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [Bug 205461] Power-On-Reset Prevents Successful Receive Diagnostics Command in SES Module.
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 205461] New: Power-On-Reset Prevents Successful Receive Diagnostics Command in SES Module.
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 2/9] c6x: Include <linux/unaligned/generic.h> instead of duplicating it
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH 0/8] Zone management commands support
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH 8/8] null_blk: add zone open, close, and finish support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 7/8] dm: add zone open, close and finish support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 6/8] scsi: sd_zbc: add zone open, close, and finish support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 5/8] block: add zone open, close and finish ioctl support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 4/8] block: add zone open, close and finish operations
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 2/8] block: Simplify REQ_OP_ZONE_RESET_ALL handling
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 1/8] block: Remove REQ_OP_ZONE_RESET plugging
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH v2 6/6] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] scsi: ufs: Add dev ref clock gating wait time support
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 3/6] scsi: ufs: Remove the check before call setup clock notify vops
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] scsi: ufs: set load before setting voltage in regulators
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] scsi: ufs: Flush exception event before suspend
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] UFS driver general fixes bundle 4
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] UFS driver general fixes bundle 4
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 6/6] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 5/6] scsi: ufs: Add dev ref clock gating wait time support
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 4/6] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 3/6] scsi: ufs: Remove the check before call setup clock notify vops
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 2/6] scsi: ufs: set load before setting voltage in regulators
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 1/6] scsi: ufs: Flush exception event before suspend
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v1 0/6] UFS driver general fixes bundle 4
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH 10/12] pm80xx : Controller fatal error through sysfs.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: Slow I/O on USB media after commit f664a3cc17b7d0a2bc3b3ab96181e1029b0ec0e6
  • From: Andrea Vai <andrea.vai@xxxxxxxx>
• Re: [PATCH] tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• RE: [PATCH 10/12] pm80xx : Controller fatal error through sysfs.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• [PATCH 1/2] qla2xxx: Remove an include directive
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 2/2] qla2xxx: Fix a dma_pool_free() call
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 3/3] lpfc: Fix lpfc_cpumask_of_node_init()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 2/3] lpfc: Fix a kernel warning triggered by lpfc_sli4_enable_intr()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 1/3] lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 0/3] Three lpfc fixes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/9] c6x: Include <linux/unaligned/generic.h> instead of duplicating it
  • From: Bart Van Assche <bvanassche@xxxxxxx>