From: ianyar <ianyar@xxxxxxxxxx>
The function mpi_uninit_check takes longer for inbound doorbell
register to be cleared. Increased the timeout substantially so
that the driver does not fail to load.
Signed-off-by: ianyar <ianyar@xxxxxxxxxx>
Signed-off-by: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
Acked-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++--
drivers/scsi/pm8001/pm80xx_hwi.h | 3 +++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 6057610263c1..9d04e5cfffb4 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -735,9 +735,9 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE);
/* wait until Inbound DoorBell Clear Register toggled */
if (IS_SPCV_12G(pm8001_ha->pdev)) {
- max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+ max_wait_count = SPCV_DOORBELL_CLEAR_TIMEOUT;
} else {
- max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+ max_wait_count = SPC_DOORBELL_CLEAR_TIMEOUT;
}
do {
udelay(1);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index dc9ab7689060..701951a0f715 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -220,6 +220,9 @@
#define SAS_DOPNRJT_RTRY_TMO 128
#define SAS_COPNRJT_RTRY_TMO 128
+#define SPCV_DOORBELL_CLEAR_TIMEOUT (30 * 1000 * 1000) /* 30 sec */
+#define SPC_DOORBELL_CLEAR_TIMEOUT (15 * 1000 * 1000) /* 15 sec */
+
/*
Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
--
2.16.3
