[PATCH AUTOSEL 4.19 139/205] scsi: qla2xxx: Defer chip reset until target mode is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <quinn.tran@xxxxxxxxxx>

[ Upstream commit 93eca6135183f7a71e36acd47655a085ed11bcdc ]

For target mode, any chip reset triggered before target mode is enabled will
be held off until user is ready to enable.  This prevents the chip from
starting or running before it is intended.

Signed-off-by: Quinn Tran <quinn.tran@xxxxxxxxxx>
Signed-off-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_os.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 60b6019a2fcae..bfbdec61b3c6e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -6051,12 +6051,27 @@ qla2x00_do_dpc(void *data)
 		if (test_and_clear_bit
 		    (ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
 		    !test_bit(UNLOADING, &base_vha->dpc_flags)) {
+			bool do_reset = true;
+
+			switch (ql2x_ini_mode) {
+			case QLA2XXX_INI_MODE_ENABLED:
+				break;
+			case QLA2XXX_INI_MODE_DISABLED:
+				if (!qla_tgt_mode_enabled(base_vha))
+					do_reset = false;
+				break;
+			case QLA2XXX_INI_MODE_DUAL:
+				if (!qla_dual_mode_enabled(base_vha))
+					do_reset = false;
+				break;
+			default:
+				break;
+			}
 
-			ql_dbg(ql_dbg_dpc, base_vha, 0x4007,
-			    "ISP abort scheduled.\n");
-			if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
+			if (do_reset && !(test_and_set_bit(ABORT_ISP_ACTIVE,
 			    &base_vha->dpc_flags))) {
-
+				ql_dbg(ql_dbg_dpc, base_vha, 0x4007,
+				    "ISP abort scheduled.\n");
 				if (ha->isp_ops->abort_isp(base_vha)) {
 					/* failed. retry later */
 					set_bit(ISP_ABORT_NEEDED,
@@ -6064,10 +6079,9 @@ qla2x00_do_dpc(void *data)
 				}
 				clear_bit(ABORT_ISP_ACTIVE,
 						&base_vha->dpc_flags);
+				ql_dbg(ql_dbg_dpc, base_vha, 0x4008,
+				    "ISP abort end.\n");
 			}
-
-			ql_dbg(ql_dbg_dpc, base_vha, 0x4008,
-			    "ISP abort end.\n");
 		}
 
 		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED,
-- 
2.20.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux