[PATCH V2 09/13] pm80xx : Cleanup command when a reset times out.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: peter chang <dpf@xxxxxxxxxx>

Added the fix so the if driver properly sent the abort it try to remove
it from the firmware's list of outstanding commands regardless of the
abort status. This means that the task gets free-ed 'now' rather than
possibly getting free-ed later when the scsi layer thinks it's leaked
but still valid.

Signed-off-by: peter chang <dpf@xxxxxxxxxx>
Signed-off-by: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_sas.c | 50 +++++++++++++++++++++++++++++-----------
 1 file changed, 37 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 4491de8d40fc..b7cbc312843e 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -1204,8 +1204,8 @@ int pm8001_abort_task(struct sas_task *task)
 	pm8001_dev = dev->lldd_dev;
 	pm8001_ha = pm8001_find_ha_by_dev(dev);
 	phy_id = pm8001_dev->attached_phy;
-	rc = pm8001_find_tag(task, &tag);
-	if (rc == 0) {
+	ret = pm8001_find_tag(task, &tag);
+	if (ret == 0) {
 		pm8001_printk("no tag for task:%p\n", task);
 		return TMF_RESP_FUNC_FAILED;
 	}
@@ -1243,26 +1243,50 @@ int pm8001_abort_task(struct sas_task *task)
 
 			/* 2. Send Phy Control Hard Reset */
 			reinit_completion(&completion);
+			phy->port_reset_status = PORT_RESET_TMO;
 			phy->reset_success = false;
 			phy->enable_completion = &completion;
 			phy->reset_completion = &completion_reset;
 			ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 				PHY_HARD_RESET);
-			if (ret)
-				goto out;
-			PM8001_MSG_DBG(pm8001_ha,
-				pm8001_printk("Waiting for local phy ctl\n"));
-			wait_for_completion(&completion);
-			if (!phy->reset_success)
+			if (ret) {
+				phy->enable_completion = NULL;
+				phy->reset_completion = NULL;
 				goto out;
+			}
 
-			/* 3. Wait for Port Reset complete / Port reset TMO */
+			/* In the case of the reset timeout/fail we still
+			 * abort the command at the firmware. The assumption
+			 * here is that the drive is off doing something so
+			 * that it's not processing requests, and we want to
+			 * avoid getting a completion for this and either
+			 * leaking the task in libsas or losing the race and
+			 * getting a double free.
+			 */
 			PM8001_MSG_DBG(pm8001_ha,
+				pm8001_printk("Waiting for local phy ctl\n"));
+			ret = wait_for_completion_timeout(&completion,
+					PM8001_TASK_TIMEOUT * HZ);
+			if (!ret || !phy->reset_success) {
+				phy->enable_completion = NULL;
+				phy->reset_completion = NULL;
+			} else {
+				/* 3. Wait for Port Reset complete or
+				 * Port reset TMO
+				 */
+				PM8001_MSG_DBG(pm8001_ha,
 				pm8001_printk("Waiting for Port reset\n"));
-			wait_for_completion(&completion_reset);
-			if (phy->port_reset_status) {
-				pm8001_dev_gone_notify(dev);
-				goto out;
+				ret = wait_for_completion_timeout(
+					&completion_reset,
+					PM8001_TASK_TIMEOUT * HZ);
+				if (!ret)
+					phy->reset_completion = NULL;
+				WARN_ON(phy->port_reset_status ==
+						PORT_RESET_TMO);
+				if (phy->port_reset_status == PORT_RESET_TMO) {
+					pm8001_dev_gone_notify(dev);
+					goto out;
+				}
 			}
 
 			/*
-- 
2.16.3




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux