Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- Re: [PATCH] mmc: omap_hsmmc: add hibernation support, (continued)
- [PATCH 1/2] net: davinci_mdio: add hibernation callbacks,
grygorii.strashko
- [PATCH 1/2] ARM: OMAP2: hwmod: AM43XX: Add hwmod support for HDQ-1W,
Vignesh R
- [PATCH 0/2] Add support for HDQ-1W on AM43XX,
Vignesh R
- [PATCH] ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig,
Aaro Koskinen
- [PATCH] ARM: dts: am335x-lxm: Use rmii-clock-ext,
George McCollister
- [PATCH] ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecounting,
Tero Kristo
- [PATCH] Documentation: DT: omap_serial: document missing properties and add an example,
Matt Porter
- [PATCH RFC 0/6] Use DRM component API in tilcdc to connect to tda998x,
Jyri Sarha
- [PATCH 0/8] ARM OMAP2+ GPMC: fixes and bus children,
Robert ABEL
- [PATCH 8/8] ARM OMAP2+ GPMC: fix programming/showing reserved timing parameters,
Robert ABEL
- [PATCH 7/8] ARM OMAP2+ GPMC: fix WAITMONITORINGTIME divider bug,
Robert ABEL
- [PATCH 6/8] ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME,
Robert ABEL
- [PATCH 5/8] ARM OMAP2+ GPMC: always program GPMCFCLKDIVIDER,
Robert ABEL
- [PATCH 1/8] ARM OMAP2+ GPMC: don't undef DEBUG,
Robert ABEL
- [PATCH 4/8] ARM OMAP2+ GPMC: change get_gpmc_timing_reg output for DTS,
Robert ABEL
- [PATCH 4/8] ARM OMAP2+ GPMC: fix debug output alignment,
Robert ABEL
- [PATCH 2/8] ARM OMAP2+ GPMC: add bus children,
Robert ABEL
- Re: [PATCH 0/8] ARM OMAP2+ GPMC: fixes and bus children,
Roger Quadros
- Re: [PATCH 0/8] ARM OMAP2+ GPMC: fixes and bus children,
Roger Quadros
- [PATCH 00/10] omap3 crypto fixes,
Pali Rohár
- [PATCH 10/10] ARM: dts: Remove files omap34xx-hs.dtsi and omap36xx-hs.dtsi,
Pali Rohár
- [PATCH 09/10] ARM: dts: omap3-tao3530: Include directly omap34xx.dtsi,
Pali Rohár
- [PATCH 08/10] ARM: dts: n900: Enable omap sham and include directly omap34xx.dtsi,
Pali Rohár
- [PATCH 07/10] ARM: dts: n9/n950: Enable omap crypto support,
Pali Rohár
- [PATCH 06/10] ARM: dts: omap3: Add missing dmas for crypto,
Pali Rohár
- [PATCH 05/10] ARM: dts: omap3 hs: Remove timer12,
Pali Rohár
- [PATCH 04/10] crypto: omap-sham: Check for return value from pm_runtime_get_sync,
Pali Rohár
- [PATCH 03/10] crypto: omap-sham: Add support for omap3 devices,
Pali Rohár
- [PATCH 01/10] ARM: OMAP2+: Return correct error values from device and hwmod,
Pali Rohár
- [PATCH 02/10] ARM: OMAP3: Fix crypto support for HS devices,
Pali Rohár
- Re: [PATCH 00/10] omap3 crypto fixes,
Aaro Koskinen
- Re: [PATCH 00/10] omap3 crypto fixes,
Tony Lindgren
- [PATCH] ARM: DTS: am57xx-beagle-x15: Do not include the atl header,
Peter Ujfalusi
- [PATCH] ARM: DTS: dra7xx-clocks: Add gate clock for CLKOUT2,
Peter Ujfalusi
- [PATCH 00/21] drm/omap: misc fixes/improvements,
Tomi Valkeinen
- [PATCH 01/21] drm/omap: fix encoder-crtc mapping,
Tomi Valkeinen
- [PATCH 02/21] drm/omap: page_flip: return -EBUSY if flip pending,
Tomi Valkeinen
- [PATCH 03/21] drm/omap: clear omap_obj->paddr in omap_gem_put_paddr(),
Tomi Valkeinen
- [PATCH 04/21] drm/omap: add pin refcounting to omap_framebuffer,
Tomi Valkeinen
- [PATCH 05/21] drm/omap: add a comment why locking is missing,
Tomi Valkeinen
- [PATCH 06/21] drm/omap: check CRTC color format earlier,
Tomi Valkeinen
- [PATCH 07/21] drm/omap: fix operation without fbdev,
Tomi Valkeinen
- [PATCH 09/21] drm/omap: handle mismatching color format and buffer width,
Tomi Valkeinen
- [PATCH 10/21] drm/omap: fix TILER on OMAP5,
Tomi Valkeinen
- [PATCH 12/21] drm/omap: tiler: fix race condition with engine->async,
Tomi Valkeinen
- [PATCH 13/21] drm/omap: remove dummy PM functions,
Tomi Valkeinen
- [PATCH 17/21] drm/omap: only ignore DIGIT SYNC LOST for TV output,
Tomi Valkeinen
- [PATCH 18/21] drm/omap: do not use BUG_ON(!spin_is_locked(x)),
Tomi Valkeinen
- [PATCH 20/21] drm/omap: fix race conditon in DMM,
Tomi Valkeinen
- [PATCH 19/21] drm/omap: fix race condition with dev->obj_list,
Tomi Valkeinen
- [PATCH 21/21] drm/omap: keep ref to old_fb,
Tomi Valkeinen
- [PATCH 14/21] drm/omap: stop connector polling during suspend,
Tomi Valkeinen
- [PATCH 15/21] drm/omap: use DRM_ERROR_RATELIMITED() for error irqs,
Tomi Valkeinen
- [PATCH 16/21] drm/omap: fix race with error_irq,
Tomi Valkeinen
- [PATCH 11/21] drm/omap: fix plane's channel selection,
Tomi Valkeinen
- [PATCH 08/21] drm/omap: fix error handling in omap_framebuffer_create(),
Tomi Valkeinen
- [PATCH 01/15] OMAPDSS: fix AM43xx minimum pixel clock divider,
Tomi Valkeinen
- [PATCH 02/15] OMAPDSS: HDMI5: Increase DDC SDA-HOLD time,
Tomi Valkeinen
- [PATCH 03/15] OMAPDSS: fix paddr check for TILER addresses,
Tomi Valkeinen
- [PATCH 05/15] OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
Tomi Valkeinen
- [PATCH 07/15] OMAPDSS: change signal_level & signal_edge enum values,
Tomi Valkeinen
- [PATCH 08/15] OMAPDSS: DISPC: change sync_pclk_edge default value,
Tomi Valkeinen
- [PATCH 09/15] OMAPDSS: DISPC: fix div by zero issue in overlay scaling,
Tomi Valkeinen
- [PATCH 06/15] OMAPDSS: DISPC: explicit handling for sync and de levels,
Tomi Valkeinen
- [PATCH 13/15] OMAPDSS: workaround for MFLAG + NV12 issue,
Tomi Valkeinen
- [PATCH 11/15] OMAPDSS: setup default fifo thresholds,
Tomi Valkeinen
- [PATCH 12/15] OMAPDSS: Add support for MFLAG,
Tomi Valkeinen
- [PATCH 14/15] OMAPDSS: HDMI: hdmi synclost work-around,
Tomi Valkeinen
- [PATCH 10/15] OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG,
Tomi Valkeinen
- [PATCH 15/15] OMAPDSS: disable VT switch,
Tomi Valkeinen
- [PATCH 04/15] OMAPDSS: TFP410: fix input sync signals,
Tomi Valkeinen
- [PATCH] dma: cppi41: add missing directions bitfield,
Felipe Balbi
- OMAP baseline test results for v4.0-rc1,
Paul Walmsley
- [PATCHv3 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1,
Tero Kristo
- [PATCHv3 01/35] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init,
Tero Kristo
- [PATCHv3 02/35] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs,
Tero Kristo
- [PATCHv3 03/35] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs,
Tero Kristo
- [PATCHv3 04/35] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone,
Tero Kristo
- [PATCHv3 06/35] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver,
Tero Kristo
- [PATCHv3 05/35] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver,
Tero Kristo
- [PATCHv3 07/35] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order,
Tero Kristo
- [PATCHv3 09/35] Documentation: DT: document PRCM compatible strings for dm81x SoCs,
Tero Kristo
- [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling,
Tero Kristo
- [PATCHv3 10/35] ARM: OMAP2+: PRCM: add support for static clock memmap indices,
Tero Kristo
- [PATCHv3 11/35] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver,
Tero Kristo
- [PATCHv3 13/35] ARM: OMAP2+: CM: determine CM base address from device tree,
Tero Kristo
- [PATCHv3 12/35] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files,
Tero Kristo
- [PATCHv3 16/35] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API,
Tero Kristo
- [PATCHv3 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility,
Tero Kristo
- [PATCHv3 18/35] ARM: OMAP2+: CM: move SoC specific init calls within a generic API,
Tero Kristo
- [PATCHv3 15/35] ARM: OMAP2+: control: determine control module base address from DT,
Tero Kristo
- [PATCHv3 19/35] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags,
Tero Kristo
- [PATCHv3 14/35] ARM: OMAP2+: PRM: determine PRM base address from device tree,
Tero Kristo
- [PATCHv3 22/35] ARM: OMAP2+: control: remove API for getting control module base address,
Tero Kristo
- [PATCHv3 21/35] ARM: OMAP2+: clock: add low-level support for regmap,
Tero Kristo
- [PATCHv3 23/35] ARM: OMAP2+: id: cache omap_type value,
Tero Kristo
- [PATCHv3 24/35] ARM: OMAP2+: control: add syscon support for register accesses,
Tero Kristo
- [PATCHv3 26/35] ARM: dts: omap3: merge control module features under scrm node,
Tero Kristo
- [PATCHv3 25/35] ARM: dts: omap24xx: merge control module features under scrm node,
Tero Kristo
- [PATCHv3 29/35] ARM: dts: am4372: merge control module features under scrm node,
Tero Kristo
- [PATCHv3 28/35] ARM: dts: am43xx-epos-evm: fix pinmux node layout,
Tero Kristo
- [PATCHv3 30/35] ARM: dts: omap4: add system control module node,
Tero Kristo
- [PATCHv3 31/35] ARM: OMAP4: display: convert display to use syscon for dsi muxing,
Tero Kristo
- [PATCHv3 34/35] ARM: dts: dra7: add system control module node,
Tero Kristo
- [PATCHv3 27/35] ARM: dts: am33xx: merge control module features under scrm node,
Tero Kristo
- [PATCHv3 20/35] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init,
Tero Kristo
- [PATCHv3 32/35] ARM: OMAP4+: control: remove support for legacy pad read/write,
Tero Kristo
- [PATCHv3 35/35] ARM: OMAP4+: control: add support for initializing control module via DT,
Tero Kristo
- [PATCHv3 33/35] ARM: dts: omap5: add system control module node,
Tero Kristo
- [PATCH v2] ARM: dts: am335x-bone-common: enable aes and sham,
Matt Porter
- [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688,
Stefan Hengelein
- [PATCH] drm/omap: tiler: add hibernation callback,
grygorii.strashko
- build warning on v4.0-rc1,
Felipe Balbi
- Dead Kconfig Option OMAP4_ERRATA_I688,
Stefan Hengelein
- [PATCH] ARM: dts: am335x-boneblack: enable aes and sham,
Matt Porter
- [PATCH] omapdss: extend pm notifier to handle hibernation,
grygorii.strashko
- [PATCH] ASoC: omap: fix up SND_OMAP_SOC_OMAP_ABE_TWL6040 dependency,
Arnd Bergmann
- [PATCH] ARM: omap-device: add missed callback for suspend-to-disk,
grygorii.strashko
- [PATCH] OMAP: DSS: DPI: disable vt-switch on suspend/resume.,
NeilBrown
- [GIT PULL] omap fixes against v4.0-rc1,
Tony Lindgren
- [PATCH 0/8 v2] ARM OMAP2+ GPMC: fixes and bus children,
Robert ABEL
- [PATCH] ARM: dts: am335x-bone*: usb0 is hardwired for peripheral,
Robert Nelson
- [PATCH 0/6] dmaengine/dra7x: DMA router (crossbar support),
Peter Ujfalusi
- [PATCH][v4.0-rc] ARM: dts: dra7x-evm: beagle-x15: Fix USB Host,
Roger Quadros
- [PATCH] OMAPDSS: restore "name" sysfs entry.,
NeilBrown
- [PATCH 00/15] Enhance twl4030_charger functionality.,
NeilBrown
- [PATCH 08/15] twl4030_charger: distinguish between USB current and 'AC' current,
NeilBrown
- [PATCH 07/15] twl4030_charger: allow fine control of charger current.,
NeilBrown
- [PATCH 06/15] twl4030_charger: split uA calculation into a function.,
NeilBrown
- [PATCH 05/15] twl4030_charger: trust phy to determine when USB power is available.,
NeilBrown
- [PATCH 04/15] twl4030_charger: use runtime_pm to keep usb phy active while charging.,
NeilBrown
- [PATCH 03/15] twl4030_charger: use devres for power_supply_register and kzalloc.,
NeilBrown
- [PATCH 02/15] twl4030_charger: use devm_request_threaded_irq,
NeilBrown
- [PATCH 01/15] power_supply core: support use of devres to register/unregister a power supply.,
NeilBrown
- [PATCH 09/15] twl4030_charger: allow max_current to be managed via sysfs.,
NeilBrown
- [PATCH 15/15] twl4030_charger: assume a 'charger' can supply maximum current.,
NeilBrown
- [PATCH 14/15] twl4030_charger: Increase current carefully while watching voltage.,
NeilBrown
- [PATCH 13/15] twl4030_charger: add ac/mode to match usb/mode,
NeilBrown
- [PATCH 12/15] twl4030_charger: add software controlled linear charging mode.,
NeilBrown
- [PATCH 11/15] twl4030_charger: enable manual enable/disable of usb charging.,
NeilBrown
- [PATCH 10/15] twl4030_charger: only draw USB current as negotiated with host.,
NeilBrown
- [PATCH 0/4] Enhancements to twl4030 phy to support better charging.,
NeilBrown
- [PATCH 0/4] Switch to 1-bit mode SDIO before disabling clocks.,
NeilBrown
- New l3-noc error with CPUFREQ_DT built-in with v4.0-rc1,
Tony Lindgren
- [PATCH v5 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains,
Marc Zyngier
- [PATCH v5 1/7] genirq: Add irqchip_set_wake_parent,
Marc Zyngier
- [PATCH v5 2/7] irqchip: crossbar: convert dra7 crossbar to stacked domains,
Marc Zyngier
- [PATCH v5 3/7] DT: update ti,irq-crossbar binding,
Marc Zyngier
- [PATCH v5 4/7] irqchip: GIC: get rid of routable domain,
Marc Zyngier
- [PATCH v5 5/7] DT: arm,gic: kill arm,routable-irqs,
Marc Zyngier
- [PATCH v5 6/7] DT: omap4/5: add binding for the wake-up generator,
Marc Zyngier
- [PATCH v5 7/7] ARM: omap: convert wakeupgen to stacked domains,
Marc Zyngier
- Re: [PATCH v5 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains,
Nishanth Menon
- Re: [PATCH v5 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains,
Tony Lindgren
- Re: [PATCH v5 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains,
Marc Zyngier
- Re: [PATCH v5 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains,
santosh shilimkar
[PATCH 0/2] ARM: omap2plus_defconfig: Fix SATA and NAND for v4.0-rc,
Roger Quadros
[PATCH v5 0/5] Add support for Fujitsu USB host controller,
Sneeker Yeh
[PATCH v2 RESEND] ASoC: OMAP: mcbsp: ensure that CLKX and CLKR are not used as ouput pins when they are used as input clock for the SRG.,
Thomas Niederprüm
[PATCH 0/5] ARM: DTS: OMAP/DRA7: dma property name correction,
Peter Ujfalusi
[PATCH 1/2] ARM: DRA7: hwmod_data: Fix hwmod data for pcie,
Kishon Vijay Abraham I
[PATCH v3] omap-rng: Change RNG_CONFIG_REG to RNG_CONTROL_REG when, checking and disabling TRNG,
Andre Wolokita
[PATCH] ARM: OMAP2+: Return correct error values from device and hwmod,
Pali Rohár
"advanced" LED controllers,
Felipe Balbi
[PATCH v2] dtc: parser: Add label while overriding nodes,
Nikhil Devshatwar
[PATCH] arm: boot: dts: am437x-idk: enable i2c2,
Felipe Balbi
[PATCH] arm: boot: dts: am437x-idk: fix sleep pinctrl state,
Felipe Balbi
[PATCH] i2c: omap: implement bus recovery,
Felipe Balbi
[PATCH 1/2] arm: boot: dts: am437x-idk: fix TPS62362 i2c bus,
Felipe Balbi
[PATCH] ARM: dts: OMAP3-N900: Fix offset for smc91x ethernet,
Pali Rohár
Nokia N900: omap aes is broken,
Pali Rohár
testing script for n900,
Pavel Machek
[PATCH v2 0/3] ARM: dts: add openpandora device support,
Marek Belisko
3.20-rc0 breaks nfsroot over usb,
Pavel Machek
remoteproc & OMAP3,
Sven Brandau
[PATCH v4 0/5] Add support for Fujitsu USB host controller,
Sneeker Yeh
[PATCH 0/4] ARM OMAP2+ GPMC: various fixes and bus children,
Robert ABEL
Enabling DBGEN signal in GP OMAP3,
Grazvydas Ignotas
n900 audio: any ideas how to get headset speaker to work?,
Pavel Machek
[PATCHv2 00/33] ARM: OMAP2+: PRCM/omap ctrl cleanups against 3.19-rc1,
Tero Kristo
- [PATCHv2 01/33] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver,
Tero Kristo
- [PATCHv2 02/33] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init,
Tero Kristo
- [PATCHv2 06/33] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs,
Tero Kristo
- [PATCHv2 07/33] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs,
Tero Kristo
- [PATCHv2 03/33] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files,
Tero Kristo
- [PATCHv2 10/33] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver,
Tero Kristo
- [PATCHv2 11/33] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver,
Tero Kristo
- [PATCHv2 09/33] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone,
Tero Kristo
- [PATCHv2 12/33] ARM: OMAP2+: clock: add support for static clock memmap indexes,
Tero Kristo
- [PATCHv2 18/33] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility,
Tero Kristo
- [PATCHv2 15/33] ARM: OMAP2+: PRM: determine PRM base address from device tree,
Tero Kristo
- [PATCHv2 17/33] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API,
Tero Kristo
- [PATCHv2 21/33] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init,
Tero Kristo
- [PATCHv2 19/33] ARM: OMAP2+: CM: move SoC specific init calls within a generic API,
Tero Kristo
- [PATCHv2 20/33] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags,
Tero Kristo
- [PATCHv2 14/33] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order,
Tero Kristo
- [PATCHv2 16/33] ARM: OMAP2+: control: determine control module base address from DT,
Tero Kristo
- [PATCHv2 22/33] ARM: OMAP2+: clock: convert low-level clock APIs to use regmap,
Tero Kristo
- [PATCHv2 25/33] ARM: dts: am33xx: add syscon support to scrm node,
Tero Kristo
- [PATCHv2 24/33] ARM: OMAP2+: id: cache omap_type value,
Tero Kristo
- [PATCHv2 26/33] ARM: dts: am4372: add syscon support to control module node,
Tero Kristo
- [PATCHv2 23/33] ARM: OMAP2+: control: remove API for getting control module base address,
Tero Kristo
- [PATCHv2 28/33] ARM: dts: omap3: add syscon support to scrm node,
Tero Kristo
- [PATCHv2 29/33] ARM: OMAP2+: control: convert to use syscon for register accesses,
Tero Kristo
- [PATCHv2 27/33] ARM: dts: omap24xx: add syscon support to scrm node,
Tero Kristo
- [PATCHv2 13/33] ARM: OMAP2+: CM: determine CM base address from device tree,
Tero Kristo
- [PATCHv2 30/33] ARM: dts: omap4: add nodes for control module core instances,
Tero Kristo
- [PATCHv2 33/33] ARM: OMAP4+: control: add support for initializing control module via DT,
Tero Kristo
- [PATCHv2 32/33] ARM: dts: dra7: fix control module core instance nodes,
Tero Kristo
- [PATCHv2 31/33] ARM: dts: omap5: add nodes for control module core instances,
Tero Kristo
- Re: [PATCHv2 00/33] ARM: OMAP2+: PRCM/omap ctrl cleanups against 3.19-rc1,
Tony Lindgren
[PATCH 0/9] ARM: DRA7: add display support,
Tomi Valkeinen
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]
