Pinmux node should be a reference to the base one, not a complete re-write
of it. Having the node like this also prevents modifying the node layout
in the base am4372.dtsi file, which is needed for control module changes.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 84 +++++++++++++++++-----------------
1 file changed, 42 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 257c099..72f01bb 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -69,7 +69,48 @@
};
};
- am43xx_pinmux: pinmux@44e10800 {
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
+ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
+ &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
+ &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
+
+ col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
+ &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
+ &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
+ &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
+
+ linux,keymap = <0x00000201 /* P1 */
+ 0x01000204 /* P4 */
+ 0x02000207 /* P7 */
+ 0x0300020a /* NUMERIC_STAR */
+ 0x00010202 /* P2 */
+ 0x01010205 /* P5 */
+ 0x02010208 /* P8 */
+ 0x03010200 /* P0 */
+ 0x00020203 /* P3 */
+ 0x01020206 /* P6 */
+ 0x02020209 /* P9 */
+ 0x0302020b /* NUMERIC_POUND */
+ 0x00030067 /* UP */
+ 0x0103006a /* RIGHT */
+ 0x0203006c /* DOWN */
+ 0x03030069>; /* LEFT */
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&am43xx_pinmux {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
@@ -279,47 +320,6 @@
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
- };
-
- matrix_keypad: matrix_keypad@0 {
- compatible = "gpio-matrix-keypad";
- debounce-delay-ms = <5>;
- col-scan-delay-us = <2>;
-
- row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
- &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
- &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
- &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
-
- col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
- &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
- &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
- &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
-
- linux,keymap = <0x00000201 /* P1 */
- 0x01000204 /* P4 */
- 0x02000207 /* P7 */
- 0x0300020a /* NUMERIC_STAR */
- 0x00010202 /* P2 */
- 0x01010205 /* P5 */
- 0x02010208 /* P8 */
- 0x03010200 /* P0 */
- 0x00020203 /* P3 */
- 0x01020206 /* P6 */
- 0x02020209 /* P9 */
- 0x0302020b /* NUMERIC_POUND */
- 0x00030067 /* UP */
- 0x0103006a /* RIGHT */
- 0x0203006c /* DOWN */
- 0x03030069>; /* LEFT */
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 51 53 56 62 75 101 152 255>;
- default-brightness-level = <8>;
- };
};
&mmc1 {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
