Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH] ARM: dts: Fix omap l4per idling with wlcore edge sensitive interrupt
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Fix omap l4per idling with wlcore edge sensitive interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH] ARM: dts: Fix omap l4per idling with wlcore edge sensitive interrupt
  • From: "Reizer, Eyal" <eyalr@xxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH v2] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand: omap2: Do not assign omap_nand_info to platform drvdata
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: Dramatic lockdep slowdown in 4.14
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: Dramatic lockdep slowdown in 4.14
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: PCI: dra7xx: Add SoC specific compatible strings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 0/2] memory: Introduce ti-emif-sram driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v5 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v5 1/2] Documentation: dt: Update ti,emif bindings
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: gpmc-nand broken since v4.12
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: gpmc-nand broken since v4.12
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: dts: Fix omap l4per idling with wlcore edge sensitive interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 5/6] ARM: DRA7: hwmod: Add VPE nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: am335x: GPIOs not waking up system
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [Patch 5/6] ARM: DRA7: hwmod: Add VPE nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [Patch 3/6] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 3/6] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [Patch 2/6] ARM: DRA7: hwmod: Add CAL nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [PATCH 4/7] bus: ti-sysc: Add minimal TI sysc interconnect target driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv1 00/14] omapdrm: DSI command mode panel support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -next] ARM: OMAP2+: omap_device: fix error return code in omap_device_copy_resources()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 5/6] ARM: DRA7: hwmod: Add VPE nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 3/6] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 2/6] ARM: DRA7: hwmod: Add CAL nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 1/6] ARM: dts: DRA72: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [Patch 1/6] ARM: dts: DRA72: Add CAL dtsi node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/2] device tree changes for omaps for v4.15 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] soc changes for omaps for v4.15 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/10] PCI: dwc: make cpu_addr_fixup take struct dw_pcie as argument
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• [PATCH 00/10] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: drm_kms_helper cycle detected build error in next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• drm_kms_helper cycle detected build error in next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: gpmc-nand broken since v4.12
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mtd: nand: omap2: Do not assign omap_nand_info to platform drvdata
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• gpmc-nand broken since v4.12
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Dramatic lockdep slowdown in 4.14
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH -next] ARM: OMAP2+: omap_device: fix error return code in omap_device_copy_resources()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• Re: Dramatic lockdep slowdown in 4.14
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Dramatic lockdep slowdown in 4.14
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [Patch 6/6] ARM: dts: dra7: Add VPE dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 0/6] ARM: dts/hwmod: Add CAL and VPE nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 4/6] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 2/6] ARM: DRA7: hwmod: Add CAL nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 5/6] ARM: DRA7: hwmod: Add VPE nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 1/6] ARM: dts: DRA72: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 3/6] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [PATCH v2 0/2] dmaengine: edma/omap-dma: max_burst validity checking
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RESEND PATCH] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] ARM: dts: Fix gpmc addresses for Logic PD SOM-LV NAND and enet
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RESEND PATCH] memory: omap-gpmc: Drop gpmc_status
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv1 00/14] omapdrm: DSI command mode panel support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/8] Add hwmod data for IPU & DSP processors/MMUs
  • From: Tero Kristo <t-kristo@xxxxxx>
• am335x: GPIOs not waking up system
  • From: Mark Greer <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: dts: dra7-evm-common: Enable relevant IPU and DSP MMU nodes
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v4] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 6/8] ARM: OMAP5: hwmod_data: Add data for IPU & DSP processors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: dts: dra7-evm-common: Enable relevant IPU and DSP MMU nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] ARM-OMAP: Adjustments for three function implementations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] irqchip: irq-omap-intc: Remove omap3_init_irq()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] of: Devices with pci_epf_bus_type require DMA configuration
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ARM: dts: omap3: Replace deprecated mcp prefix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] dra7/omap5: Increase max-voltage of pbias to 3.3v
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: Move pcie RC node to common file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: Move pcie RC node to common file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] of: Devices with pci_epf_bus_type require DMA configuration
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 3/3] misc: pci_endpoint_test: Fix BUG_ON error during pci_disable_msi
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/3] misc: pci_endpoint_test: Fix failure path return values in probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/3] misc: pci_endpoint_test: Fix pci_endpoint_test not releasing resources on remove
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/3] pci_endpoint_test: Fix module removal/insertion cycle
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] ARM: dts: dra7-evm: Move pcie RC node to common file
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] of: Devices with pci_epf_bus_type require DMA configuration
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/1] cpufreq: ti-cpufreq: add missing of_node_put()
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] ARM: head-common.S: Clear lr before jumping to start_kernel()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/7] ARM: dts: Use ti-sysc module driver for omap4 musb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] mtd: nand: omap2: Do not assign omap_nand_info to platform drvdata
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH 1/1] cpufreq: ti-cpufreq: add missing of_node_put()
  • From: Zumeng Chen <zumeng.chen@xxxxxxxxx>
• [PATCH v2] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH 3/4] PCI: dwc: dra7xx: Add support for SoC specific compatible strings
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/4] dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 4/4] PCI: dwc: pci-dra7xx: Enable x2 mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/4] dt-bindings: PCI: dra7xx: Add SoC specific compatible strings
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/4] PCI: dwc: pci-dra7: Support PCIe x2 lane mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RESEND PATCH] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: lp873x: Update the enable mask for LDOs and BUCKs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] PCI: dwc: dra7xx: Create functional dependency between PCIe and PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] PCI: dwc: dra7xx: Create functional dependency between PCIe and PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/2] PCI: dwc: dra7xx: Create functional dependency between PCIe and PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] regulator: lp873x: Update the enable mask for LDOs and BUCKs
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: lp873x: Update the enable mask for LDOs and BUCKs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: lp873x: Update the enable mask for LDOs and BUCKs
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] regulator: lp873x: Update the enable mask for LDOs and BUCKs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 0/2] phy: ti-pipe3: Update PCIe PHY settings
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/2] PCI: dwc: dra7xx: Create functional dependency between PCIe and PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/2] phy: ti-pipe3: Update pcie phy settings
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 0/2] USB: musb: PM fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: dra7: Increase max-voltage of pbias regulator
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/2] ARM: dts: omap5: Increase max-voltage of pbias regulator
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/2] dra7/omap5: Increase max-voltage of pbias to 3.3v
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH ] cpufreq: ti-cpufreq: kfree opp_data when failure
  • From: Zumeng Chen <zumeng.chen@xxxxxxxxxxxxx>
• [PATCH v2] memory: omap-gpmc: use OneNAND base address from FDT
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: "santosh.shilimkar@xxxxxxxxxx" <santosh.shilimkar@xxxxxxxxxx>
• Re: [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 0/2] USB: musb: PM fixes
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [RESEND PATCH] memory: omap-gpmc: Drop gpmc_status
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [RESEND PATCH] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: Questions about bluetooth on N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] usb: isp1301-omap: Convert timers to use timer_setup()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] USB: musb: PM fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 0/2] USB: musb: PM fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] irqchip: irq-omap-intc: Remove omap3_init_irq()
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: omap3: Replace deprecated mcp prefix
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] usb: isp1301-omap: Convert timers to use timer_setup()
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH ] cpufreq: ti-cpufreq: kfree opp_data when failure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [GIT PULL] fixes for omaps for v4.14-rc cycle
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH 4/4] ARM: OMAP: Fix typos in two comment lines in _omap_dm_timer_request()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: OMAP: Use kcalloc() in omap_system_dma_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: OMAP: Improve a size determination in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: OMAP: Delete an error message for a failed memory allocation in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] ARM-OMAP: Adjustments for three function implementations
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxxxxxx>
• Re: [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxxxxxx>
• [RESEND PATCH] gpio: omap: Fix lost edge interrupts
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v4 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2 2/2] dmaengine: omap-dma: Implement protection for invalid max_burst
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 1/2] dmaengine: edma: Implement protection for invalid max_burst
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 0/2] dmaengine: edma/omap-dma: max_burst validity checking
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [GIT PULL] fixes for omaps for v4.14-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/11] AM43xx EPOS EVM sleep pinmux
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: make omap_dma_dev_info __initdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] J6 Entry SR2.1 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap1: add const and initconst to omap_lcd_config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] ARM: dts: am43xx-epos-evm: Enable SGX on EPOS boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] omap_ssi_core: fix kilo to be "k" not "K"
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: Questions about bluetooth on N900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: Questions about bluetooth on N900
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 4/7] bus: ti-sysc: Add minimal TI sysc interconnect target driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/7] ARM: dts: Use ti-sysc module driver for omap4 musb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/7] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/7] ARM: dts: Configure SmartReflex only to idle the interconnect target module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/7] ARM: OMAP2+: Populate legacy resources for dma and smartreflex
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/7] ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv4 0/7] Fix remaining issues to drop more omap platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for gpmc
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 11/11] ARM: dts: am43xx-epos-evm: Add default pinmux for unused pins
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 09/11] ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for uart0
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 02/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for spi0 and spi1
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 08/11] ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for matrix_keypad0
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 10/11] ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for usb2_phy1 and usb2_phy2
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 00/11] AM43xx EPOS EVM sleep pinmux
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 04/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for ecap0
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 03/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for qspi1
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 07/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for mmc1
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 01/11] ARM: dts: am43xx: Introduce additional pinmux definitions for DS0
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 06/11] ARM: dts: am43xx-epos-evm: Add sleep pinmux for pixcir_ts
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Update TMDSEVM3530 support for omap3-evm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCHv1 00/14] omapdrm: DSI command mode panel support
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 0/4] Update TMDSEVM3530 support for omap3-evm
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• Re: [PATCH v2 16/31] usb/phy-isp1301-omap: Remove .data assignment
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v4 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH ] cpufreq: ti-cpufreq: kfree opp_data when failure
  • From: Zumeng Chen <zumeng.chen@xxxxxxxxxxxxx>
• Re: [PATCH ] cpufreq: ti-cpufreq: kfree opp_data when failure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH ] cpufreq: ti-cpufreq: kfree opp_data when failure
  • From: Zumeng Chen <zumeng.chen@xxxxxxxxxxxxx>
• Re: [PATCH ] cpufreq: ti-cpufreq: kfree opp_data when failure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] clk/ti: Delete an error message for a failed memory allocation in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] regulator: lp873x: Update the enable mask for LDOs and BUCKs
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• [PATCH ] cpufreq: ti-cpufreq: kfree opp_data when failure
  • From: Zumeng Chen <zumeng.chen@xxxxxxxxxxxxx>
• [PATCH v4 0/2] memory: Introduce ti-emif-sram driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v4 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v4 1/2] Documentation: dt: Update ti,emif bindings
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2] gpio: omap: Fix lost edge interrupts
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• [PATCH v2] gpio: omap: Fix lost edge interrupts
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] Update MUSB CPPI 4.1 driver to correctly manage the DA8xx
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: n900 in next-20170901
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• bq27xxx: add battery protection
  • From: Pavel Machek <pavel@xxxxxx>
• Re: n900 in next-20170901
  • From: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
• bq27xxx: what is going on with MSLEEP() macro
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• [PATCH] omap_ssi_core: fix kilo to be "k" not "K"
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/8] Add hwmod data for IPU & DSP processors/MMUs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Add hwmod data for IPU & DSP processors/MMUs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 0/8] Add hwmod data for IPU & DSP processors/MMUs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Add hwmod data for IPU & DSP processors/MMUs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v3 0/3] mmc: Add OMAP SDHCI driver
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dmaengine: ti-dma-crossbar: Fix possible race condition with dma_inuse
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dmaengine: ti-dma-crossbar: Fix possible race condition with dma_inuse
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [v2,3/3] can: m_can: Add PM Runtime
  • From: "Yang, Wenyou" <Wenyou.Yang@xxxxxxxxxxxxx>
• Re: [v2,1/3] can: m_can: Make hclk optional
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH 1/5] dmaengine: edma: Implement protection for invalid max_burst
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/5] dmaengine: omap-dma: Implement protection for invalid max_burst
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dmaengine: ti-dma-crossbar: Fix possible race condition with dma_inuse
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: n900 in next-20170901
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2] dmaengine: edma: Align the memcpy acnt array size with the transfer
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Applied "ASoC: davinci-mcasp: Handle return value of devm_kasprintf" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "ASoC: omap-hdmi-audio: Handle return value of devm_kasprintf" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "ASoC: fsl-asoc-card: Handle return value of devm_kasprintf" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ASoC: fsl-asoc-card: Handle return value of devm_kasprintf
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 08/10] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2,1/3] can: m_can: Make hclk optional
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] pinctrl: single: make two arrays static const, reduces object code size
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 00/16] gpio: Tight IRQ chip integration and banked infrastructure
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio: omap: omap_gpio_show_rev is not __init
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dmaengine: ti-dma-crossbar: Fix possible race condition with dma_inuse
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/3] ASoC: davinci-mcasp: Handle return value of devm_kasprintf
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/3] ASoC: fsl-asoc-card: Handle return value of devm_kasprintf
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• Re: [PATCH 08/10] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [v2,3/3] can: m_can: Add PM Runtime
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [v2,1/3] can: m_can: Make hclk optional
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v2 16/31] usb/phy-isp1301-omap: Remove .data assignment
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 03/10] ARM: dts: omap4: add bus functionality to base PRCM nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/10] dt-bindings: bus: Minimal TI sysc interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/10] ARM: dts: omap4: add clkctrl nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/10] ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/10] ARM: OMAP2+: Populate legacy resources for dma and smartreflex
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/10] bus: ti-sysc: Add minimal TI sysc interconnect target driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/10] ARM: dts: Add nodes for missing omap4 interconnect target modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/10] ARM: dts: Configure SmartReflex only to idle the interconnect target module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/10] ARM: dts: Use ti-sysc module driver for omap4 musb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/10] ARM: dts: omap4: add fck under timer1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3 00/10] Fix remaining issues to drop more omap platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 1/4] usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 4/4] usb: musb: da8xx: Remove duplicated defines
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 3/4] usb: musb: musb_cppi41: Configure the number of channels for DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 2/4] usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 0/4] Update MUSB CPPI 4.1 driver to correctly manage the DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] usb: musb: musb_cppi41: Configure the number of channels for DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am43xx-epos-evm: Enable SGX on EPOS boards
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: Configure earlycon for omap5-common
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] ARM: dts: Configure earlycon for pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: Configure earlycon for n8x0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] gpio: omap: Fix lost edge interrupts
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am43xx-epos-evm: Enable SGX on EPOS boards
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 1/3] ASoC: davinci-mcasp: Handle return value of devm_kasprintf
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• [PATCH 2/3] ASoC: fsl-asoc-card: Handle return value of devm_kasprintf
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• [PATCH 3/3] ASoC: omap-hdmi-audio: Handle return value of devm_kasprintf
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• [PATCH 0/3] ASoC: Handle return value of devm_kasprintf
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH v2 3/4] usb: musb: musb_cppi41: Configure the number of channels for DA8xx
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 4/4] usb: musb: da8xx: Remove duplicated defines
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 3/4] usb: musb: musb_cppi41: Configure the number of channels for DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 1/4] usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 0/4] Update MUSB CPPI 4.1 driver to correctly manage the DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v3] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v4] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] cpufreq: ti-cpufreq: Support additional am43xx platforms
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] cpufreq: ti-cpufreq: Support additional am43xx platforms
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v3] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH] arm: dts: am33xx: Add spi alias to match SOC schematics
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap2: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] nokia n900: drop unneeded/undocumented parts of the dts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] pinctrl: single: make two arrays static const, reduces object code size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] cpufreq: dt-platdev: Add devices covered by ti-cpufreq to blacklist
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] cpufreq: dt-platdev: Add devices covered by ti-cpufreq to blacklist
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] cpufreq: dt-platdev: Add devices covered by ti-cpufreq to blacklist
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH] pinctrl: single: make two arrays static const, reduces object code size
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 0/2] Dual MMU support for TI DRA7xx DSPs
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH] input: touchscreen: ti_am335x_tsc: Fix incorrect step config for 5 wire touchscreen
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: Linux-next broken for 2 weeks was Re: n900 in next-20170901
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Linux-next broken for 2 weeks was Re: n900 in next-20170901
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap2: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v3 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] gpio: omap: omap_gpio_show_rev is not __init
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxxxxxx>
• [PATCH] ARM: dts: am43xx-epos-evm: Enable SGX on EPOS boards
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] omap: hwmod: fix section mismatch warnings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: make omap_dma_dev_info __initdata
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: power: supply: bq27xxx: enable writing capacity values for bq27500
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2] dmaengine: edma: Align the memcpy acnt array size with the transfer
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Linux-next broken for 2 weeks was Re: n900 in next-20170901
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: n900 in next-20170901
  • From: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
• Re: n900 in next-20170901
  • From: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
• [PATCH] gpio: omap: omap_gpio_show_rev is not __init
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] gpio: omap: Fix lost edge interrupts
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 00/16] gpio: Tight IRQ chip integration and banked infrastructure
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] gpio: omap: Fix lost edge interrupts
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH] omap: hwmod: fix section mismatch warnings
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] dmaengine: edma: Align the memcpy acnt array size with the transfer
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 00/16] gpio: Tight IRQ chip integration and banked infrastructure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: edma: Align the memcpy acnt array size with the transfer
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] N900: Fix USB networking not working when cable is already attached during boot
  • From: Pavel Machek <pavel@xxxxxx>
• Re: n900 in next-20170901
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: n900 in next-20170901
  • From: Pavel Machek <pavel@xxxxxx>
• [crazy hacks] N900 flashlight
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] dmaengine: edma: Align the memcpy acnt array size with the transfer
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: n900 in next-20170901
  • From: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
• Re: [PATCH 14/16] gpio: Add support for banked GPIO controllers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/16] gpio: Add support for banked GPIO controllers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH 1/2] mfd: tps65218: Correct the config description
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] mfd: tps65218: Introduce dependency on CONFIG_OF
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/3] mmc: sdhci-omap: Add OMAP SDHCI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: n900 in next-20170901
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] mfd: tps65218: Introduce dependency on CONFIG_OF
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/2] mfd: tps65218: Correct the config description
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: n900 in next-20170901
  • From: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
• [PATCH v3 4/4] ARM: dts: omap3-evm: Add DSS {vdds_dsi,vdda_video}-supply references
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v3 1/4] ARM: dts: omap3-evm-37xx: Add common processor module support
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v3 2/4] ARM: dts: omap3-evm: Add OMAP3530 specific device tree processor data
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v3 3/4] ARM: dts: omap3: Add Sharp LS037V7DW01 'envdd' supply
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v3 0/4] Update TMDSEVM3530 support for omap3-evm
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: omap3: Fix Sharp LS037V7DW01 compatible string and envdd supply
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: omap3: Fix Sharp LS037V7DW01 compatible string and envdd supply
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] dmaengine: edma: Implement device_get_max_len callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/5] dmaengine: omap-dma: Implement protection for invalid max_burst
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/5] dmaengine: core/edma/omap-dma: maximum SG len reporting
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 5/5] dmaengine: omap-dma: Implement device_get_max_len callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/5] dmaengine: Support for querying maximum trasnfer length (of an SG element)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/5] dmaengine: edma: Implement protection for invalid max_burst
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/2] usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: omap3-evm: Add OMAP3530 specific device tree processor data
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v2 1/4] ARM: dts: omap3-evm-37xx: Add common processor module support
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v2 3/4] ARM: dts: omap3: Fix Sharp LS037V7DW01 compatible string and envdd supply
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v2 4/4] ARM: dts: omap3-evm: Add DSS {vdds_dsi,vdda_video}-supply references
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH v2 0/4] Update TMDSEVM3530 support for omap3-evm
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• Re: [PATCH 16/17] ARM: dts: Add missing hwmod related nodes for am33xx
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 09/17] ARM: dts: Add missing iss node and binding for omap4
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 06/17] ARM: dts: Add missing slimbus node and binding for omap4
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 05/17] ARM: dts: Add missing smartreflex node and binding for omap4
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/17] ARM: dts: Add missing properties for omap4 control modules
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RESEND PATCH] arm: dts: am33xx: Add spi alias to match SOC schematics
  • From: sunil.m@xxxxxxxxxxxx
• [PATCH] omap2: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: n900 in next-20170901
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v3] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 1/2] usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v3 0/3] mmc: Add OMAP SDHCI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: n900 in next-20170901
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 2/2] backlight: add TI LMU backlight driver
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: n900 in next-20170901
  • From: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: enable NEON based crypto
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH] ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: n900 in next-20170901
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: dra7xx: Reset the mcasp3_ahclkx_mux clock value
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v3 0/3] mmc: Add OMAP SDHCI driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 2/3] mmc: sdhci-omap: Add OMAP SDHCI driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 3/3] MAINTAINERS: Add TI OMAP SDHCI Maintainer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 1/3] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] clk: ti: dra7xx: Reset the mcasp3_ahclkx_mux clock value
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH] clk: ti: dra7xx: Reset the mcasp3_ahclkx_mux clock value
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH] arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH net-next] net: cpsw: Don't handle SIOC[GS]HWTSTAMP when CPTS is disabled
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: n900 in next-20170901
  • From: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>
• [PATCH v2 0/2] Dual MMU support for TI DRA7xx DSPs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 2/2] iommu/omap: Add support to program multiple iommus
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 1/2] iommu/omap: Change the attach detection logic
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH net-next] net: cpsw: Don't handle SIOC[GS]HWTSTAMP when CPTS is disabled
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: n900 in next-20170901
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: n900 in next-20170901
  • From: Vlastimil Babka <vbabka@xxxxxxx>
• Re: n900 in next-20170901
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] Update TMDSEVM3530 support for omap3-evm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] mmc: sdhci-omap: Add OMAP SDHCI driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCHv4 2/3] Input: pwm-vibra: new driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Applied "regulator: pbias: Select voltage table based on max-voltage" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/2] PCI: dwc: convert remaining dbi read/writes to dw_pcie_readX_dbi/dw_pcie_writeX_dbi
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [PATCH v4] mfd: tps65217: Introduce dependency on CONFIG_OF
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 11/17] ARM: dts: Add missing mcasp node for omap4
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Applied "regulator: pbias: Select voltage table based on max-voltage" to the regulator tree
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• n900 in next-20170901
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 2/2] ARM: dts: omap3-evm: Add OMAP3530 specific device tree processor data
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH 1/2] ARM: dts: omap3-evm-37xx: Add common processor module support
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• [PATCH 0/2] Update TMDSEVM3530 support for omap3-evm
  • From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
• Fwd: power: supply: bq27xxx: enable writing capacity values for bq27500
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iommu/omap: Add support to program multiple iommus
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/2] iommu/omap: Add support to program multiple iommus
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: Applied "regulator: pbias: Select voltage table based on max-voltage" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] iommu/omap: Add support to program multiple iommus
  • From: Suman Anna <s-anna@xxxxxx>
• Re: Applied "regulator: pbias: Select voltage table based on max-voltage" to the regulator tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 4/4] soc: ti: Add pm33xx driver for basic suspend support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] iommu/omap: Add support to program multiple iommus
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH][next] clk: ti: check for null return in strrchr to avoid null dereferencing
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH 16/31] usb/phy-isp1301-omap: Remove .data assignment
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 12/17] ARM: dts: Add missing aess node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/17] ARM: dts: Add missing mcasp node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: Regression in next with gpiolib
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Applied "regulator: pbias: Select voltage table based on max-voltage" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 0/2] Dual MMU support for TI DRA7xx DSPs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/2] iommu/omap: Add support to program multiple iommus
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/2] iommu/omap: Change the attach detection logic
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 4/5] mmc: sdhci-omap: Add OMAP SDHCI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: Applied "regulator: pbias: Select voltage table based on max-voltage" to the regulator tree
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Applied "regulator: pbias: Select voltage table based on max-voltage" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 0/6] mmc: Add OMAP SDHCI driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 5/6] mmc: sdhci-omap: Add OMAP SDHCI driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/6] ARM: dts: dra7: Increase max-voltage of pbias regulator
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/6] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 6/6] MAINTAINERS: Add TI OMAP SDHCI Maintainer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/6] regulator: pbias: Select voltage table based on max-voltage
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/6] mmc: host: omap_hsmmc: Remove setting PBIAS voltage
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 2/4] power: supply: bq27xxx: enable writing capacity values for bq27500
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] power: supply: bq27xxx: enable writing capacity values for bq27421
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH v3 3/4] DT: OpenPandora: add battery node to describe OpenPandora battery
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 2/4] power: supply: bq27xxx: enable writing capacity values for bq27500
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 4/4] DT: OpenPandora: fix for configuration of bq27500 fuel gauge
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 1/4] power: supply: bq27xxx: enable writing capacity values for bq27421
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 0/4] fixes for latest bq27xxx driver and OpenPandora DT nodes
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH net-next] net: cpsw: Don't handle SIOC[GS]HWTSTAMP when CPTS is disabled
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• [PATCH v3 0/4] fixes for latest bq27xxx driver and OpenPandora DT nodes
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 2/4] power: supply: bq27xxx: enable writing capacity values for bq27500
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 4/4] DT: OpenPandora: fix for configuration of bq27500 fuel gauge
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 3/4] DT: OpenPandora: add battery node to describe OpenPandora battery
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 1/4] power: supply: bq27xxx: enable writing capacity values for bq27421
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Regression in next with gpiolib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 12/17] ARM: dts: Add missing aess node and binding for omap4
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 11/17] ARM: dts: Add missing mcasp node for omap4
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/2] ARM: DRA722: remove redundant definition of 1.0 device
  • From: Vishal Mahaveer <vishalm@xxxxxx>
• [PATCH 2/2] ARM: DRA722: Add support for DRA71x Silicon Rev 2.1
  • From: Vishal Mahaveer <vishalm@xxxxxx>
• [PATCH 0/2] J6 Entry SR2.1 support
  • From: Vishal Mahaveer <vishalm@xxxxxx>
• Re: Regression in next with gpiolib
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] net: cpsw: Don't handle SIOC[GS]HWTSTAMP when CPTS is disabled
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Regression in next with gpiolib
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] net: ti: cpsw-common: dont print error if ti_cm_get_macid() fails
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: OMAP2+: Drop legacy struct omap_hwmod_addr_space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/17] ARM: dts: Configure pmu without interrupt for omap4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/17] ARM: dts: Add missing onewire node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/17] ARM: dts: Add missing properties for omap4 control modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/17] ARM: dts: Add missing wdt3 node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/17] ARM: dts: Add missing hwmod related nodes for am33xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/17] ARM: dts: Add missing dma hwmod property for omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/17] ARM: dts: Add missing hwmod related properties for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/17] ARM: dts: Add missing aess node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/17] ARM: dts: Add missing mcasp node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/17] ARM: dts: Add missing iss node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/17] ARM: dts: Add missing slimbus node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/17] ARM: dts: Add missing smartreflex node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/17] ARM: dts: Add missing hwmods property for omap4 dma
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/17] ARM: dts: Add missing dma hwmods property for omap3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 00/17] Fix missing device tree hwmods and IO ranges omap variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] mmc: sdhci-omap: Add OMAP SDHCI driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/5] mmc: sdhci: Tidy reading 136-bit responses
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/5] mmc: sdhci: Add quirk to indicate MMC_RSP_136 has CRC
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v4] mfd: tps65217: Introduce dependency on CONFIG_OF
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3] mfd: tps65217: Introduce dependency on CONFIG_OF
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH] net: ti: cpsw-common: dont print error if ti_cm_get_macid() fails
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3] mfd: tps65217: Introduce dependency on CONFIG_OF
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH net-next] net: cpsw: Don't handle SIOC[GS]HWTSTAMP when CPTS is disabled
  • From: Stefan Sørensen <stefan.sorensen@xxxxxxxxxxxxxxx>
• [PATCH v3] mfd: tps65217: Introduce dependency on CONFIG_OF
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2] mfd: tps65217: Introduce dependency on CONFIG_OF
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] ARM: OMAP2+: Drop legacy struct omap_hwmod_addr_space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: OMAP2+: Drop omap_hwmod_dma_info
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] ARM: OMAP2+: Drop omap_hwmod_irq_info
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP2+: Populate legacy resources for dma and smartreflex
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] ARM: OMAP4: Remove legacy IRQ for PRM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] ARM: OMAP3: Remove legacy IRQ for PRM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Drop omap hwmod legacy resources
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 5/5] ARM: OMAP2+: Drop unused omap_hwmod_mux_info
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] ARM: OMAP2+: Fix overwriting of clkctrl and modulemode values
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] ARM: OMAP2+: Drop unused omap_init_hdq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/5] Fixes for omap hwmod for dropping legacy data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] ARM: OMAP2+: Fix access to reserved smartreflex registers for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] ARM: OMAP2+: Fix MMC address space mismatch for am33xx and am43xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 09/17] ARM: dts: Add missing iss node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 09/17] ARM: dts: Add missing iss node and binding for omap4
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 17/17] ARM: dts: Add missing hwmod related properties for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 17/17] ARM: dts: Add missing hwmod related properties for dra7
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 17/17] ARM: dts: Add missing hwmod related properties for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 17/17] ARM: dts: Add missing hwmod related properties for dra7
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 07/17] ARM: dts: Add missing onewire node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/17] ARM: dts: Add missing iss node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/17] ARM: dts: Add missing aess node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/17] ARM: dts: Add missing dma hwmod property for omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/17] ARM: dts: Add missing hwmod related properties for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/17] ARM: dts: Add missing gpu node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/17] ARM: dts: Add missing hwmod related nodes for am33xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/17] ARM: dts: Add missing fdif node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/17] ARM: dts: Add missing mcasp node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/17] ARM: dts: Add missing wdt3 node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/17] ARM: dts: Add missing hsi node for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/17] ARM: dts: Add missing hwmods property for omap4 dma
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/17] ARM: dts: Add missing slimbus node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/17] ARM: dts: Add missing smartreflex node and binding for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/17] ARM: dts: Add missing properties for omap4 control modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/17] ARM: dts: Configure pmu without interrupt for omap4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/17] ARM: dts: Add missing dma hwmods property for omap3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/17] Fix missing device tree hwmods and IO ranges omap variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Fwd: DA850-evm MAC Address is random
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] nokia n900: update dts with camera support
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH] dmaengine: ti-dma-crossbar: Fix dra7 reserve function
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Fwd: DA850-evm MAC Address is random
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] nokia n900: update dts with camera support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH] nokia n900: update dts with camera support
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] nokia n900: drop unneeded/undocumented parts of the dts
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH linux-next] fix compilation error in mach-omap2/display.c
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH linux-next] fix compilation error in mach-omap2/display.c
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/5] MAINTAINERS: Add TI OMAP SDHCI Maintainer
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 4/5] mmc: sdhci-omap: Add OMAP SDHCI driver
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 2/5] mmc: sdhci: Add quirk to indicate MMC_RSP_136 has CRC
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH] dmaengine: ti-dma-crossbar: Fix dra7 reserve function
  • From: Alexander Smirnov <asmirnov@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix missing variable declaration
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] dma/ti-crossbar: Fix reserve function
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dma/ti-crossbar: Fix reserve function
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] mfd: omap-usb-tll: fix register offsets
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [v2,3/3] can: m_can: Add PM Runtime
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [v2,1/3] can: m_can: Make hclk optional
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] clk: ti: make clk_ops const
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 06/11] ASoC: pxa: make snd_soc_platform_driver const
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix missing variable declaration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] mfd: omap-usb-tll: fix register offsets
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix missing variable declaration
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: fix missing variable declaration
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] clk: ti: make clk_ops const
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] PCI: dwc: dra7xx: fix error return code in dra7xx_pcie_probe()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP4: hwmod_data: Remove modulemode from IPU/DSP hwmods
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] PCI: dwc: dra7xx: fix error return code in dra7xx_pcie_probe()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP4: hwmod_data: Remove modulemode from IPU/DSP hwmods
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP4: hwmod_data: Remove modulemode from IPU/DSP hwmods
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP4: hwmod_data: Remove modulemode from IPU/DSP hwmods
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] clk: ti: make clk_ops const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH] arm: dts: am33xx: Add spi alias to match SOC schematics
  • From: sunil.m@xxxxxxxxxxxx
• Re: device tree bindings for lp5523 leds on N950?
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH] ARM: omap1: add const and initconst to omap_lcd_config
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 4/5] ARM: dts: am572x-idk: Enable relevant IPU and DSP MMU nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/5] Enable DRA7 processor MMU DT nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/5] ARM: dts: dra7-evm-common: Enable relevant IPU and DSP MMU nodes
  • From: Suman Anna <s-anna@xxxxxx>