On Tue 2015-02-24 15:33:52, NeilBrown wrote:
> 'off' or 'auto' to
>
> /sys/class/power/twl4030_usb/mode
>
> will now enable or disable charging from USB port. Normally this is
> enabled on 'plug' and disabled on 'unplug'.
> Unplug will still disable charging. 'plug' will only enable it if
> 'auto' if selected.
This should go to Documentation/
> Signed-off-by: NeilBrown <neilb@xxxxxxx>
>
> Conflicts:
> drivers/power/twl4030_charger.c
Is it supposed to be here?
> diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
> index 01090a440583..19e8dbb1303e 100644
> --- a/drivers/power/twl4030_charger.c
> +++ b/drivers/power/twl4030_charger.c
> @@ -107,6 +107,9 @@ struct twl4030_bci {
> int ichg_eoc, ichg_lo, ichg_hi;
> int usb_cur, ac_cur;
> bool ac_is_active;
> + int usb_mode; /* charging mode requested */
> +#define CHARGE_OFF 0
> +#define CHARGE_AUTO 1
>
> unsigned long event;
> };
> @@ -377,6 +380,8 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
> {
> int ret;
>
n> + if (bci->usb_mode == CHARGE_OFF)
> + enable = false;
Sometimes, you use = false and sometimes = 0 when assigning to bools...
> @@ -629,6 +634,54 @@ static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
> return NOTIFY_OK;
> }
>
> +/*
> + * sysfs charger enabled store
> + */
> +static char *modes[] = { "off", "auto" };
I'd move this before the comment. Or better near struct twl4030_bci.
> +static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show,
> + twl4030_bci_mode_store);
> +
> static int twl4030_charger_get_current(void)
> {
> int curr;
> @@ -799,6 +852,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
> bci->usb_cur = 500000; /* 500mA */
> else
> bci->usb_cur = 100000; /* 100mA */
> + bci->usb_mode = CHARGE_AUTO;
>
> bci->dev = &pdev->dev;
> bci->irq_chg = platform_get_irq(pdev, 0);
> @@ -885,6 +939,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
> twl4030_charger_update_current(bci);
> if (device_create_file(bci->usb.dev, &dev_attr_max_current))
> dev_warn(&pdev->dev, "could not create sysfs file\n");
> + if (device_create_file(bci->usb.dev, &dev_attr_mode))
> + dev_warn(&pdev->dev, "could not create sysfs file\n");
> if (device_create_file(bci->ac.dev, &dev_attr_max_current))
> dev_warn(&pdev->dev, "could not create sysfs file\n");
>
> @@ -917,6 +973,7 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
>
> device_remove_file(bci->usb.dev, &dev_attr_max_current);
> device_remove_file(bci->ac.dev, &dev_attr_max_current);
> + device_remove_file(bci->usb.dev, &dev_attr_mode);
move the line above for consistency with create?
Acked-by: Pavel Machek <pavel@xxxxxx>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
