Hi Daniel,
On Friday 27 February 2015 13:07:57 Daniel Vetter wrote:
> On Thu, Feb 26, 2015 at 03:20:14PM +0200, Tomi Valkeinen wrote:
> > When setting a color format to a DRM plane, the DRM core checks whether
> > the format is supported by the HW. However, it seems that when setting
> > the color format of a CRTC (i.e. a root plane), there's no checking
> > done. This causes omapdrm to configure omapdss with the bad color
> > format, which omapdss then rejects.
> >
> > While the above is ok, the error message is a bit confusing, and the
> > configuring of omapdss happens asynchronously from the ioctl that does
> > the color format change.
> >
> > This patch adds a color format check to omap_plane_mode_set() which
> > causes the ioctl to return an error for invalid color format. This means
> > that the userspace will get to know of the wrong setting, instead of the
> > current behavior where the error is not seen by the userspace.
> >
> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> > ---
> >
> > drivers/gpu/drm/omapdrm/omap_plane.c | 18 ++++++++++++++++++
> > 1 file changed, 18 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c
> > b/drivers/gpu/drm/omapdrm/omap_plane.c index 1f4f2b866379..bedd6f7af0f1
> > 100644
> > --- a/drivers/gpu/drm/omapdrm/omap_plane.c
> > +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
> > @@ -207,6 +207,24 @@ int omap_plane_mode_set(struct drm_plane *plane,
> >
> > {
> >
> > struct omap_plane *omap_plane = to_omap_plane(plane);
> > struct omap_drm_window *win = &omap_plane->win;
> >
> > + int i;
> > +
> > + /*
> > + * Check whether this plane supports the fb pixel format.
> > + * I don't think this should really be needed, but it looks like the
> > + * drm core only checks the format for planes, not for the crtc. So
> > + * when setting the format for crtc, without this check we would
> > + * get an error later when trying to program the color format into
the
> > + * HW.
> > + */
>
> I think we should add a format check to the setcrtc ioctl if crtc->primary
> is set. Atm the code is in __setplane_internal but could easily be shared
> - there's already a copy in drm_atomi.c.
I'll submit a patch.
> Omapdrm wouldn't benefit from this yet since it doesn't support universal
> planes. But adding universal planes should be on your todo anyway ;-)
Soon, soon :-)
> > + for (i = 0; i < plane->format_count; i++)
> > + if (fb->pixel_format == plane->format_types[i])
> > + break;
> > + if (i == plane->format_count) {
> > + DBG("Invalid pixel format %s",
> > + drm_get_format_name(fb->pixel_format));
> > + return -EINVAL;
> > + }
> >
> > win->crtc_x = crtc_x;
> > win->crtc_y = crtc_y;
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
