This patch moves all the control module related features under scrm
node. scm_conf area is changed to use syscon, and also the clocks
are moved under scm_conf area.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/boot/dts/am33xx.dtsi | 48 ++++++++++++++++++++---------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index acd3705..bc8bbcd 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -83,20 +83,6 @@
};
};
- am33xx_control_module: control_module@4a002000 {
- compatible = "syscon";
- reg = <0x44e10000 0x7fc>;
- };
-
- am33xx_pinmux: pinmux@44e10800 {
- compatible = "pinctrl-single";
- reg = <0x44e10800 0x0238>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x7f>;
- };
-
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex. Since
@@ -125,21 +111,35 @@
};
scrm: scrm@44e10000 {
- compatible = "ti,am3-scrm";
+ compatible = "ti,am3-scrm", "simple-bus";
reg = <0x44e10000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x44e10000 0x2000>;
- scrm_clocks: clocks {
+ am33xx_pinmux: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x238>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
};
- scrm_clockdomains: clockdomains {
+ scm_conf: tisyscon@0 {
+ compatible = "syscon";
+ reg = <0x0 0x7fc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
- };
- cm: syscon@44e10000 {
- compatible = "ti,am33xx-controlmodule", "syscon";
- reg = <0x44e10000 0x800>;
+ scrm_clockdomains: clockdomains {
+ };
};
intc: interrupt-controller@48200000 {
@@ -350,7 +350,7 @@
reg = <0x481cc000 0x2000>;
clocks = <&dcan0_fck>;
clock-names = "fck";
- syscon-raminit = <&am33xx_control_module 0x644 0>;
+ syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <52>;
status = "disabled";
};
@@ -361,7 +361,7 @@
reg = <0x481d0000 0x2000>;
clocks = <&dcan1_fck>;
clock-names = "fck";
- syscon-raminit = <&am33xx_control_module 0x644 1>;
+ syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <55>;
status = "disabled";
};
@@ -720,7 +720,7 @@
*/
interrupts = <40 41 42 43>;
ranges;
- syscon = <&cm>;
+ syscon = <&scm_conf>;
status = "disabled";
davinci_mdio: mdio@4a101000 {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
