Make use of the new mmc_sdio_want_no_clocks() call to avoid stopping
clocks while SD Card interrupts are enabled and we aren't in
1-bit mode.
Also stop clocks immediately in omap_hsmmc_disable_fclk() if
1-bit mode has been entered for this purpose.
With this, I can use my libertas wifi with a 4-bit bus, with
interrupts and runtime power-management enabled, and get around
14Mb/sec throughput (which is the best I've seen).
Signed-off-by: NeilBrown <neil@xxxxxxxxxx>
---
drivers/mmc/host/omap_hsmmc.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index f84cfb01716d..14fce3b92633 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1791,9 +1791,12 @@ static int omap_hsmmc_disable_fclk(struct mmc_host *mmc)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- pm_runtime_mark_last_busy(host->dev);
- pm_runtime_put_autosuspend(host->dev);
-
+ if (atomic_read(&mmc->sdio_narrowed) == 2)
+ pm_runtime_put_sync(host->dev);
+ else {
+ pm_runtime_mark_last_busy(host->dev);
+ pm_runtime_put_autosuspend(host->dev);
+ }
return 0;
}
@@ -2311,6 +2314,10 @@ static int omap_hsmmc_runtime_suspend(struct device *dev)
spin_lock_irqsave(&host->irq_lock, flags);
if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
(host->flags & HSMMC_SDIO_IRQ_ENABLED)) {
+ if (mmc_sdio_want_no_clocks(host->mmc) == 0) {
+ ret = -EBUSY;
+ goto abort;
+ }
/* disable sdio irq handling to prevent race */
OMAP_HSMMC_WRITE(host->base, ISE, 0);
OMAP_HSMMC_WRITE(host->base, IE, 0);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
