* NeilBrown <neilb@xxxxxxx> [150303 21:29]:
> On Tue, 3 Mar 2015 14:53:55 -0800 Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> >
> > --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> > +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> > @@ -367,6 +367,7 @@
> > };
> >
> > &mmc2 {
> > + interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
> > vmmc-supply = <&vaux4>;
> > bus-width = <4>;
> > ti,non-removable;
>
> I had
>
> + interrupts-extended = <&intc 86 &gpio5 5 0>; /* GPIO_133 */
> + pinctrl-names = "default", "idle";
> + pinctrl-0 = <&mmc2_pins>;
> + pinctrl-1 = <&mmc2_cirq_pin>;
>
> together with
>
> + mmc2_cirq_pin: pinmux_cirq_pin {
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE4)
> + >;
> + };
> +
>
>
> and a longer definition for mmc2_pins.
>
> Is that one line reconfigure the pin on demand? How does that work?
Well the remuxing of the mmc2 dat1 pin is not needed on omap3/4/5.
These SoCs have the iochain wake-up events.
Remuxing is needed on SoCs with no iochain wake-up events, such as
am355x, am437x and dra7 variants.
Not sure if we actually have the gpio5 bank wake-up the system
properly currently from off-idle. It could be that only gpio1 bank
is currently capable of wake-up from off-idle without needing
to use the iochain wake-up also for GPIO lines.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
