Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 07/18] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 03/18] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 09/18] tty: serial: 8250_dma: handle error on TX submit
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 08/18] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 02/18] tty: serial: 8250_core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: DRA72x/DRA74x basic support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: dts: omap3-overo: Fix UART wake-up events
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v6 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v6 0/3] Add ST dwc3 glue layer driver
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v6 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v6 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v6 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [GIT PULL] omap fixes against v3.17-rc3
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v5 1/2] usb: rename phy to usb_phy in HCD
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 0/2] OMAP IOMMU Fixes for DT-clients
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH] clk: add gpio gated clock
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH] ARM: dts: dra7-evm: Fix NAND GPMC timings
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv2 2/2] iommu/omap: Fix iommu archdata name for DT-based devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2 1/2] iommu/omap: Check for valid archdata in attach_dev
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iommu/omap: Fix iommu archdata name for DT-based devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] OMAP2+: GPMC: NAND fixes for 3.17
  • From: Roger Quadros <rogerq@xxxxxx>
• [GIT PULL] omap fixes against v3.17-rc3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 1/2] iommu/omap: Check for valid archdata in attach_dev
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 2/2] iommu/omap: Fix iommu archdata name for DT-based devices
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 0/2] OMAP IOMMU Fixes for DT-clients
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v5 1/2] usb: rename phy to usb_phy in HCD
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/2] Add generic PHY support to USB HCD
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iommu/omap: Fix iommu archdata name for DT-based devices
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 0/2] ARM: dts: dra7-evm: fixes for mux and VTT control
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] OMAP2+: GPMC: NAND fixes for 3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] iommu/omap: Check for valid archdata in attach_dev
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 3/6] ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 0/6] OMAP2+: GPMC: NAND fixes for 3.17
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 3/5] usb: phy: twl4030-usb: Move code from twl4030_phy_power to the runtime PM calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: cm-t54: fix serial console power supply.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] Input: ti_am335x_tsc: Fix incorrect step config 5 wire touschscreen
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/3] ARM: DTS: AM335x: Drop TSC's wire-config parameters
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3] input: ti_am335x_tsc: Remove DT wire-config parameter
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] usb: phy: twl4030-usb: Move code from twl4030_phy_power to the runtime PM calls
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: dts: omap5.dtsi: add DSS RFBI node
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: dra7-evm: Fix spi1 mux documentation
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] ARM: dts: dra7-evm: fixes for mux and VTT control
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] ARM: dts: dra7-evm: Fix spi1 mux documentation
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] ARM: dts: dra7-evm: Add vtt regulator support
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] fix cm-t54 serial console power supply
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: sbc-t54: fix model property
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: cm-t54: fix serial console power supply.
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iommu/omap: Fix iommu archdata name for DT-based devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iommu/omap: Check for valid archdata in attach_dev
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] ARM: OMAP: add external clock provider support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: dts: omap5.dtsi: add DSS RFBI node
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/2] iommu/omap: Fix iommu archdata name for DT-based devices
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/2] iommu/omap: Check for valid archdata in attach_dev
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/2] OMAP IOMMU Fixes for DT-clients
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] arm: boot: dts: am4372: fix USB regs size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am437x-gp: switch i2c0 to 100KHz
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-bone*: Fix model name and update compatibility information
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: dra7-evm: Fixes for 3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] OMAP2+: GPMC: NAND fixes for 3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] OMAP2+: GPMC: NAND fixes for 3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP3: quick clock dts fix for 3.17-rc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-panda: Fix model and SoC family details
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] arm: boot: dts: am4372: fix USB regs size
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 0/1] ARM: OMAP: add external clock provider support
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH] clk: prevent erronous parsing of children during rate change
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: PROBLEM: bindings for drivers/mfd/twl4030-power.c
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] mfd: twl4030-power: use 'ti,system-power-controller' as alternative way to support system power off
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] mfd: twl4030-power: support ti,system-power-controller
  • From: Nishanth Menon <nm@xxxxxx>
• Re: PROBLEM: bindings for drivers/mfd/twl4030-power.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: PROBLEM: bindings for drivers/mfd/twl4030-power.c
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: am437x-gp: switch i2c0 to 100KHz
  • From: Nishanth Menon <nm@xxxxxx>
• Re: PROBLEM: bindings for drivers/mfd/twl4030-power.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/6] ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-bone*: Fix model name and update compatibility information
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 5/5] phy: exynos5-usbdrd: Adding Kconfig dependency for Exynos7
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/2] tlv320aic31xx PLL programming fix and cleanup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt source
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: Add PMU nodes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] tlv320aic31xx PLL programming fix and cleanup
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/2] tlv320aic31xx PLL programming fix and cleanup
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 1/2] ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclk
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 2/2] ASoC: tlv320aic31xx: Choose PLL p divider automatically
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Jason Cooper <jason@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: dra7-evm: Fix 8th NAND partition's name
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/2] ARM: dts: dra7-evm: Fixes for 3.17
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/2] ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: OMAP baseline test results for v3.17-rc3
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/6] ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  • From: Roger Quadros <rogerq@xxxxxx>
• [GIT PULL] ARM: OMAP3: quick clock dts fix for 3.17-rc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [GIT PULL] clk: ti: dra7xx: fixes for early 3.17-rc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] usb: dwc3: gadget: Fix desc NULL pointer in dwc3_gadget_ep_queue()
  • From: Zhuang Jin Can <jin.can.zhuang@xxxxxxxxx>
• Re: [PATCH 5/5] phy: exynos5-usbdrd: Adding Kconfig dependency for Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 4/5] usb: dwc3: Adding Kconfig dependency for Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP baseline test results for v3.17-rc3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] video: fix composite video connector compatible string
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 3/6] ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 1/6] ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
  • From: pekon <pekon@xxxxxxxxxxx>
• Re: [PATCH 0/6] OMAP2+: GPMC: NAND fixes for 3.17
  • From: pekon <pekon@xxxxxxxxxxx>
• [PATCH v5 0/3] Add ST dwc3 glue layer driver
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v5 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v5 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v5 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] ARM: debug: uncompress debug support for omap2plus
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/5] phy: exynos5-usbdrd: Adding Kconfig dependency for Exynos7
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/6] ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 6/6] ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/6] ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/6] ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 5/6] ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/6] ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/6] OMAP2+: GPMC: NAND fixes for 3.17
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH] video: fix composite video connector compatible string
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] mfd: palmas: Add support for optional wakeup
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] mfd: palmas: Add support for optional wakeup
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 16/26] ARM: OMAP2+: PRM: add generic API for checking hardreset status
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 26/26] ARM: OMAP2+: PRM: provide generic API for system reset
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 22/26] ARM: OMAP4: PRM: make omap4_prm_read/write_inst_reg calls static
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 24/26] ARM: OMAP4: PRM: make PRCM interrupt handler related functions static
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 25/26] ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 20/26] ARM: AM33xx: PRM: move global warm reset implementation to driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 23/26] ARM: OMAP3: PRM: make PRCM interrupt handler related functions static
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 19/26] ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 21/26] ARM: AM33xx: PRM: make direct register access functions static
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 15/26] ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 14/26] ARM: OMAP2+: PRM: add generic API for asserting hardware reset
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 17/26] ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 18/26] ARM: OMAP4: CM: make cminst direct register access functions static
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 10/26] ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 13/26] ARM: AM33xx: PRM: add support for prm_init
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 11/26] ARM: AM33xx: hwmod: remove am33xx specific module SoC opts
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 12/26] ARM: AM43xx: hwmod: use OMAP4 hardreset ops instead of the AM33xx version
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 09/26] ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 07/26] ARM: OMAP4+/AM33xx: CM: add common API for cm_wait_module_idle
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 08/26] ARM: OMAP2+: CM: make clkdm_hwsup operations static
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 06/26] ARM: OMAP2+: CM: add common API for cm_wait_module_ready
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 01/26] ARM: DRA7: PRM: add voltage processor check behind a prm_feature flag
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 05/26] ARM: OMAP4/AM33xx: add cm_init / cm_exit calls for AM33xx and OMAP4+
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 02/26] ARM: AM43XX: PRM: use OMAP4 PRM driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 03/26] ARM: OMAP2/3: hwmod: merge wait_target_ready functions for omap2/3
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 04/26] ARM: AM33xx/OMAP4+: CM: remove cdoffs parameter from wait_module_idle/ready
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: PROBLEM: bindings for drivers/mfd/twl4030-power.c
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2 01/26] genirq: add irq_domain-aware core IRQ handler
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/15] tty: serial: 8250_core: add run time pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 06/15] tty: serial: 8250_dma: handle error on TX submit
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 19/26] irqchip: atmel-aic: convert to handle_domain_irq
  • From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 20/26] irqchip: atmel-aic5: convert to handle_domain_irq
  • From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 20/26] irqchip: atmel-aic5: convert to handle_domain_irq
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v2 19/26] irqchip: atmel-aic: convert to handle_domain_irq
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] mfd: palmas: Add support for optional wakeup
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/5] phy: exynos5-usbdrd: Adding Kconfig dependency for Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 3/5] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: DRA72x/DRA74x basic support
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 07/15] tty: serial: 8250_dma: enqueue RX dma again on completion.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] mfd: palmas: Add support for optional wakeup
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 00/15] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH] mfd: palmas: Add support for optional wakeup
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/4 v2] arm: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 2/4 v2] arm: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 3/4 v2] arm: omap3: Add Technexion Thunder support (TAO3530 SOM based)
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 1/4 v2] arm: omap: tao3530: Add pdata-quirk for the mmc2 internal clock
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: single: Add DRA7 pinctrl compatibility
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] pinctrl: single: AM437x: Add pinctrl compatibility
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] pinctrl: bindings: Add OMAP pinctrl binding
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-panda: Fix model and SoC family details
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: dwc3: Adding Kconfig dependency for Exynos7
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/5] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/5] phy: exynos5-usbdrd: Add pipe-clk and utmi-clk support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH] usb: phy: twl6030-usb: Remove unused irq_enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] usb: phy: twl4030-usb: Remove unused irq_enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] arm: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] arm: omap: tao3530: Add pdata-quirk for the mmc2 internal clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] arm: omap: tao3530: Add pdata-quirk for the mmc2 internal clock
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 4/4] arm: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 3/4] arm: omap3: Add Technexion Thunder support (TAO3530 SOM based)
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 2/4] arm: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: DRA72x/DRA74x basic support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] phy: exynos5-usbdrd: Adding Kconfig dependency for Exynos7
  • From: Daniele Forsi <dforsi@xxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 0/5] usb: dwc3/phy-exynos5-usbdrd: Extend support to Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 2/5] phy: exynos5-usbdrd: Add pipe-clk and utmi-clk support
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 3/5] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 4/5] usb: dwc3: Adding Kconfig dependency for Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 5/5] phy: exynos5-usbdrd: Adding Kconfig dependency for Exynos7
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: DRA72x/DRA74x basic support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/5] usb: phy: twl4030-usb: Remove unused irq_enabled
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/5] Clean-up for twl4030-usb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] usb: phy: twl4030-usb: Simplify phy init to use runtime PM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] usb: phy: twl4030-usb: Remove unused irq_enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] usb: phy: twl4030-usb: Remove asleep and rely on runtime PM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] usb: phy: twl4030-usb: Move code from twl4030_phy_power to the runtime PM calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/5] usb: phy: twl4030-usb: Use mutex instead of spinlock for protecting the data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap fixes against v3.17-rc2
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH V2 4/7] ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5/DRA7: PM: cpuidle MPU CSWR support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5 / DRA7: Enable CPU RET on suspend
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5 / DRA7: Enable CPU RET on suspend
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5 / DRA7: Enable CPU RET on suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5/DRA7: PM: cpuidle MPU CSWR support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5/DRA7: PM: cpuidle MPU CSWR support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 00/10] ARM: OMAP5 / DRA7: Add framework for suspend and cpuidle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5/DRA7: PM: cpuidle MPU CSWR support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5 / DRA7: Enable CPU RET on suspend
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5 / DRA7: Enable CPU RET on suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2 4/7] ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 02/10] ARM: OMAP5 / DRA7: PM: Set MPUSS-EMIF clock-domain static dependency
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] ARM: OMAP3+: PRM: fix up prm_handling
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 4/7] ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] ARM: OMAP4+: powerdomain fixes
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 4/7] ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/7] ARM: OMAP4+: powerdomain fixes
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 21/26] irqchip: or1k-pic: convert to handle_domain_irq
  • From: Stefan Kristiansson <stefan.kristiansson@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP baseline test results for v3.17-rc2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.17-rc1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [RFI] OMAP4 ISS: l3_interrupt_handler Errors due to wrong initialized iss_fck?
  • From: "Martin Hinteregger" <martin.hinti@xxxxxx>
• Re: [PATCH] clk: ti: change clock init to use generic of_clk_init
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCHv2 27/27] OMAPDSS: connector-analog-tv: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH v14 1/6] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH v14 1/6] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH v2 23/26] ARM: imx: tzic: convert to handle_domain_irq
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v2 22/26] ARM: imx: avic: convert to handle_domain_irq
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v2 09/26] irqchip: mxs: convert to handle_domain_irq
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• [GIT PULL] omap fixes against v3.17-rc2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2 24/26] ARM: omap2: irq: convert to handle_domain_irq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 01/26] genirq: add irq_domain-aware core IRQ handler
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/26] genirq: add irq_domain-aware core IRQ handler
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/26] genirq: add irq_domain-aware core IRQ handler
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH v2 01/26] genirq: add irq_domain-aware core IRQ handler
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• possible bug with v3.17-rc1
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 02/26] arm64: convert handle_IRQ to use __handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCHv2 27/27] OMAPDSS: connector-analog-tv: Add DT support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 25/26] arm64: get rid of handle_IRQ
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH v2 02/26] arm64: convert handle_IRQ to use __handle_domain_irq
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH] pstore/ram_core: Fix hang on ARMs because of pgprot_noncached
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v4 2/7] ARM: l2c: Add interface to ask hypervisor to configure L2C
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v4 4/7] ARM: l2c: Add support for overriding prefetch settings
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v4 1/7] ARM: l2c: Refactor the driver to use commit-like interface
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v4 5/7] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v4 7/7] ARM: dts: exynos4: Add nodes for L2 cache controller
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v4 6/7] ARM: EXYNOS: Add support for non-secure L2X0 resume
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v4 3/7] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 00/26] genirq: fix use of irq_find_mapping outside of legal RCU context
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 02/26] arm64: convert handle_IRQ to use __handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 03/26] ARM: convert handle_IRQ to use __handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 04/26] openrisc: convert handle_IRQ to use __handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 05/26] irqchip: GIC: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 06/26] irqchip: armada-370-xp: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 07/26] irqchip: clps711x: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 08/26] irqchip: mmp: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 09/26] irqchip: mxs: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 10/26] irqchip: orion: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 12/26] irqchip: sirfsoc: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 11/26] irqchip: s3c24xx: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 13/26] irqchip: sun4i: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 14/26] irqchip: versatile-fpga: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 15/26] irqchip: vic: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 16/26] irqchip: vt8500: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 18/26] irqchip: GICv3: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 19/26] irqchip: atmel-aic: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 20/26] irqchip: atmel-aic5: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 21/26] irqchip: or1k-pic: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 22/26] ARM: imx: avic: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 23/26] ARM: imx: tzic: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 24/26] ARM: omap2: irq: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 25/26] arm64: get rid of handle_IRQ
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 26/26] openrisc: get rid of handle_IRQ
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 17/26] irqchip: zevio: convert to handle_domain_irq
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• [PATCH v2 01/26] genirq: add irq_domain-aware core IRQ handler
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH] ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] pstore/ram_core: Fix hang on ARMs because of pgprot_noncached
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v7 RESEND] ARM: omap: edma: add suspend suspend/resume hooks
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH v9] ARM: omap: edma: add suspend resume hook
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH] ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v7 RESEND] ARM: omap: edma: add suspend suspend/resume hooks
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v7 RESEND] ARM: omap: edma: add suspend suspend/resume hooks
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v5 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH] pstore/ram_core: Fix hang on ARMs because of pgprot_noncached
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: PROBLEM: bindings for drivers/mfd/twl4030-power.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 01/15] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 12/15] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 13/15] OMAPDSS: hdmi4: Remove callbacks for an external ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 15/15] OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 14/15] OMAPDSS: hdmi5: Remove callbacks for an external ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 09/15] OMAPDSS: Kconfig: Implement options for OMAP4 and OMAP5 HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 11/15] OMAPDSS: hdmi5: Register HDMI audio with omap_hdmi_audio_register()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 10/15] OMAPDSS: hdmi4: Register HDMI audio with omap_hdmi_audio_register()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 08/15] ASoC: omap-hdmi-audio: Add OMAP HDMI audio support library
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 07/15] OMAPDSS: hdmi: Make hdmi_mode_has_audio() more user friedly
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 06/15] OMAPDSS: hdmi: Add exported functions for storing HDMI audio data
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 04/15] OMAPDSS: hdmi_wp: Add function for getting audio dma address
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 05/15] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 02/15] OMAPDSS: hdmi: Remove most of OMAP[45]_DSS_HDMI_AUDIO ifdefs
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 03/15] OMAPDSS: hdmi4_core: Remove unused hdmi4_audio_get_dma_port()
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v4 00/15] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 1/3] pinctrl: bindings: Add OMAP pinctrl binding
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] pinctrl: single: AM437x: Add pinctrl compatibility
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] pinctrl: single: Add DRA7 pinctrl compatibility
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] pinctrl: bindings: Add OMAP pinctrl binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] ARM: OMAP5 / DRA7: Add framework for suspend and cpuidle
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5 7/7] arm: dts: am33xx, Add syscon phandle to cpsw node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 6/7] am33xx: define syscon control module device node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 5/7] net: cpsw: Add am33xx MACID readout
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v5 6/7] am33xx: define syscon control module device node
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v5 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v5 0/7] net: cpsw: Support for am335x chip MACIDs
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v5 2/7] net: cpsw: Add missing return value
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v5 7/7] arm: dts: am33xx, Add syscon phandle to cpsw node
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v5 3/7] net: cpsw: header, Add missing include
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v5 1/7] DT doc: net: cpsw mac-address is optional
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v5 4/7] net: cpsw: Replace pr_err by dev_err
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v14 1/6] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v14 1/6] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH v4 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v14 1/6] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH] ARM: dts: Remove twl6030 clk32g "regulator"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/9] use c99 initializers in structures
  • From: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
• [PATCH 0/9] use c99 initializers in structures
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 7/9] OMAPDSS: DSI: use c99 initializers in structures
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH] gpio: omap: Fix interrupt names
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: Remove twl6030 clk32g "regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: Remove twl6030 clk32g "regulator"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Remove twl6030 clk32g "regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: Remove twl6030 clk32g "regulator"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap_device: remove warning that clk alias already exists
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/19] ARM: OMAP: fix %d confusingly prefixed with 0x in format string
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: DRA7: fix interrupt-cells for GPIO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: phy: twl4030-usb: Fix regressions to runtime PM on omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: phy: twl4030-usb: Fix lost interrupts after ID pin goes down
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] pinctrl: single: AM437x: Add pinctrl compatibility
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/3] pinctrl: bindings: Add OMAP pinctrl binding
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/3] pinctrl: Add DRA7/AM437x pinctrl compatibility
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 05/10] ARM: OMAP5 / DRA7: PM: Avoid all SAR saves
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 10/10] ARM: DRA7: Add hook in SoC initcalls to enable pm initialization
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 00/10] ARM: OMAP5 / DRA7: Add framework for suspend and cpuidle
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/6] ARM: dts: OMAP3+: Add PRM interrupt
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/6] ARM: dts: DRA7: switch to compatible pinctrl
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/6] ARM: dts: AM437x: switch to compatible pinctrl
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 6/6] ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/6] ARM: dts: OMAP5/DRA7: switch over to interrupts-extended property for UART
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/6] ARM: dts: OMAP5: switch to compatible pinctrl
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/6] ARM: dts: OMAP5+: Fixes for pinctrl support
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 01/10] ARM: OMAP5 / DRA7: PM: Update CPU context register offset
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 04/10] ARM: OMAP5 / DRA7: PM: Enable Mercury retention mode on CPUx powerdomains
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 02/10] ARM: OMAP5 / DRA7: PM: Set MPUSS-EMIF clock-domain static dependency
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 06/10] ARM: OMAP5 / DRA7: PM: Provide a dummy startup function for CPU hotplug
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 03/10] ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 08/10] ARM: OMAP5/DRA7: PM: cpuidle MPU CSWR support
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 07/10] ARM: OMAP5 / DRA7: Enable CPU RET on suspend
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 09/10] ARM: OMAP5: Add hook in SoC initcalls to enable pm initialization
  • From: Nishanth Menon <nm@xxxxxx>
• [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• [PATCH 2/3] pinctrl: single: Add DRA7 pinctrl compatibility
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/3] ARM: OMAP5: use pdata quirks for pinctrl information
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/3] ARM: DRA7: use pdata quirks for pinctrl information
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/3] ARM: OMAP5+: pdata quirks for pinctrl
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/3] ARM: AM437x: use pdata quirks for pinctrl information
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/6] ARM: OMAP3+: PRM: fix up prm_handling
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/6] ARM: OMAP4+: prminst: provide function to find prm_dev instance offset
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 6/6] ARM: OMAP3+: PRM: register interrupt information from DT
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/6] ARM: OMAP4: PRM: use the generic prm_inst to allow logic to be abstracted
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/6] ARM: OMAP4+: PRM: Enable wakeup capability for OMAP5, DRA7
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/6] ARM: OMAP4+: PRM: register interrupt information from DT
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/6] ARM: OMAP4+: PRM: remove "wkup" event
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/7] ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/7] ARM: OMAP2+: powerdomain: pwrdm_for_each_clkdm iterate only valid clkdms
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 6/7] ARM: OMAP4+: PM: use only valid low power state for suspend
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/7] ARM: OMAP4+: powerdomain fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/7] ARM: OMAP5: powerdomain data: fix powerdomain powerstate
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 7/7] ARM: OMAP4+: PM: Use only valid low power state for CPU hotplug
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/7] ARM: OMAP4+: PM: Make logic state programmable
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/7] ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] usb: phy: twl4030-usb: Fix lost interrupts after ID pin goes down
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH v7 RESEND] ARM: omap: edma: add suspend suspend/resume hooks
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] usb: phy: twl4030-usb: Fix regressions to runtime PM on omaps
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Frans Klaver <fransklaver@xxxxxxxxx>
• Re: [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V3 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: "Murphy, Dan" <dmurphy@xxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: "Murphy, Dan" <dmurphy@xxxxxx>
• Re: [PATCH] usb: phy: twl4030-usb: Fix regressions to runtime PM on omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] usb: phy: twl4030-usb: Fix lost interrupts after ID pin goes down
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: phy: twl4030-usb: Fix regressions to runtime PM on omaps
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: "Murphy, Dan" <dmurphy@xxxxxx>
• [PATCH] usb: phy: twl4030-usb: Fix lost interrupts after ID pin goes down
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: phy: twl4030-usb: Fix regressions to runtime PM on omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt source
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 0/2] Input: palmas: add support for palmas power button
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 1/2] doc: dt/bindings: input: introduce palmas power button description
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH] clk: prevent erronous parsing of children during rate change
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] gpio: omap: Fix interrupt names
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v4 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] clk: ti: change clock init to use generic of_clk_init
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/2] clk: ti: Fix up error checks in set_rate (and div 0 error)
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] clk: prevent erronous parsing of children during rate change
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/2] clk: ti: Fix up error checks in set_rate (and div 0 error)
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/1] clk: ti: add support for external clock provider
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] gpio: omap: Fix interrupt names
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v4 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] gpio: omap: Fix interrupt names
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 1/5] mmc: remove .owner field for drivers using module_platform_driver
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/7] net: cpsw: Add am33xx MACID readout
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v4 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 0/7] net: cpsw: Support for am335x chip MACIDs
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 3/7] net: cpsw: header, Add missing include
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 6/7] am33xx: define syscon control module device node
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 2/7] net: cpsw: Add missing return value
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 1/7] DT doc: net: cpsw mac-address is optional
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 7/7] arm: dts: am33xx, Add syscon phandle to cpsw node
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 4/7] net: cpsw: Replace pr_err by dev_err
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v2 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 03/15] tty: serial: 8250_core: add run time pm
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• Re: [PATCH 03/15] tty: serial: 8250_core: add run time pm
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• Re: [PATCH 1/1] clk: ti: add support for external clock provider
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v2 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: Lock Directory failure
  • From: Hugh Dickins <hughd@xxxxxxxxxx>
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lock Directory failure
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• [PATCH v9 5/9] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: Questions about enabling dps(dynamic power switching) and SLM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v8 5/9] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH] mfd: palmas: Add support for optional wakeup
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: DRA7: Add PMU nodes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/1] clk: ti: add support for external clock provider
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 1/8] clk: ti: add gpio controlled clock
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 1/8] clk: ti: add gpio controlled clock
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 1/4] tty: omap-serial: pull out calculation from baud_is_mode16
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• [RFC PATCHv2 0/4] omap-serial high-speed fixes/improvements
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• [PATCH 2/4] tty: omap-serial: prevent division by zero
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• [RFC PATCH 3/4] tty: omap-serial: use threaded interrupt handler
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• [PATCH 4/4] tty: omap-serial: support setting of hardware flow control in dts
  • From: Frans Klaver <frans.klaver@xxxxxxxxx>
• Re: [PATCH v2 1/8] clk: ti: add gpio controlled clock
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/2] doc: dt/bindings: input: introduce palmas power button description
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] remoteproc: add support to handle internal memories
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] doc: dt/bindings: input: introduce palmas power button description
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH v2 8/8] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 4/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 0/8] Beaglebone-Black HDMI audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 2/8] drm/tilcdc: Add I2S HDMI audio config for tda998x
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 6/8] ARM: dts: am335x-boneblack: Add HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 7/8] ARM: OMAP2+: omap2plus_defconfig: TDA998X HDMI trough tilcdc,slave
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 5/8] ARM: dts: am33xx: Add external clock provider
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v2 1/8] clk: ti: add gpio controlled clock
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: Lock Directory failure
  • From: Hugh Dickins <hughd@xxxxxxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH 0/2] Input: palmas: add support for palmas power button
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] doc: dt/bindings: input: introduce palmas power button description
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] Input: misc: introduce palmas-pwrbutton
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: board-generic: add support for AM57xx family
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: fix interrupt-cells for GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• RE: Questions about enabling dps(dynamic power switching) and SLM
  • From: Deepa Raj <draj187@xxxxxxxxxxx>
• [PATCH 1/2] clk: ti: divider: Provide error check for incoming parameters in set_rate
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] clk: ti: Fix up error checks in set_rate (and div 0 error)
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] clk: ti: dra7-atl: Provide error check for incoming parameters in set_rate
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v7] 8250-core based serial driver for OMAP + DMA
  • From: Felipe Balbi <balbi@xxxxxx>
• Lock Directory failure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v7] 8250-core based serial driver for OMAP + DMA
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] mmc: remove .owner field for drivers using module_platform_driver
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 06/15] tty: serial: 8250_dma: handle error on TX submit
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] MMC cleanup of dev_pm_ops and .owner
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 07/15] tty: serial: 8250_dma: enqueue RX dma again on completion.
  • From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] pwm: Fix period and polarity in pwm_get() for non-perfect matches
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] pwm: Fix period and polarity in pwm_get() for non-perfect matches
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] pwm: Fix period and polarity in pwm_get() for non-perfect matches
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v7] 8250-core based serial driver for OMAP + DMA
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/2 v2] ASoC: omap: Add HA (HEAD acoustics) DSP add-on card audio driver for TAO3530
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2 v2] ASoC: Add HA (HEAD acoustics) DSP codec driver template
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 0/7] net: cpsw: Support for am335x chip MACIDs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 4/7] net: cpsw: Replace pr_err by dev_err
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v3 7/7] arm: dts: am33xx, Add syscon phandle to cpsw node
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v3 0/7] net: cpsw: Support for am335x chip MACIDs
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v3 2/7] net: cpsw: Add missing return value
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] am33xx: define syscon control module device node
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v3 3/7] net: cpsw: header, Add missing include
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v3 5/7] net: cpsw: Add am33xx MACID readout
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v3 1/7] DT doc: net: cpsw mac-address is optional
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7] 8250-core based serial driver for OMAP + DMA
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: "Lennart Sorensen" <lsorense@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v7] 8250-core based serial driver for OMAP + DMA
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: "Lennart Sorensen" <lsorense@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] 8250-core based serial driver for OMAP + DMA
  • From: "Lennart Sorensen" <lsorense@xxxxxxxxxxxxxxxxxxx>
• [PATCH 13/15] arm: dts: am33xx: add DMA properties for UART
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 14/15] arm: dts: dra7: add DMA properties for UART
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 15/15] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 12/15] tty: serial: 8250_dma: add pm runtime
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 11/15] tty: serial: 8250_dma: handle the when UART response while DMA remains idle
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 10/15] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 03/15] tty: serial: 8250_core: add run time pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 01/15] tty: serial: 8250_core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 08/15] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v7] 8250-core based serial driver for OMAP + DMA
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 09/15] dmaengine: omap-dma: complete the transfer on terminate_all
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 04/15] tty: serial: 8250_core: read only RX if there is something in the FIFO
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 06/15] tty: serial: 8250_dma: handle error on TX submit
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 05/15] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 02/15] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 07/15] tty: serial: 8250_dma: enqueue RX dma again on completion.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: DTR gpio handling removed by 985bfd54c826c0ba873ca0adfd5589263e0c6ee2
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: DTR gpio handling removed by 985bfd54c826c0ba873ca0adfd5589263e0c6ee2
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: DTR gpio handling removed by 985bfd54c826c0ba873ca0adfd5589263e0c6ee2
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 00/14] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Questions about enabling dps(dynamic power switching) and SLM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 00/14] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v3 00/14] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] rpmsg: compute number of buffers to allocate from vrings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH] pwm: Fix period and polarity in pwm_get() for non-perfect matches
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] rpmsg: compute number of buffers to allocate from vrings
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Questions about enabling dps(dynamic power switching) and SLM
  • From: Deepa Raj <draj187@xxxxxxxxxxx>
• Re: [PATCH v3 00/14] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v3 00/14] Rework OMAP4+ HDMI audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/9] ASoC: mcasp: Fix implicit BLCK divider setting
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] ARM: dts: Remove twl6030 clk32g "regulator"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] rpmsg: compute number of buffers to allocate from vrings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/5] MMC cleanup of dev_pm_ops and .owner
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 1/5] mmc: remove .owner field for drivers using module_platform_driver
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 2/5] mmc: dw_mmc-pci: Remove superflous #else condition on CONFIG_PM_SLEEP
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 4/5] mmc: sdhci-pci: Use SET_RUNTIME_PM_OPS macro to set runtime pm callbacks
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 3/5] mmc: dw_mmc-pltfm: Remove superflous #else condition on CONFIG_PM_SLEEP
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 5/5] mmc: sdhci-acpi.c: Use SET_RUNTIME_PM_OPS macro to set runtime pm callbacks
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH] rpmsg: compute number of buffers to allocate from vrings
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [GIT PULL] hwspinlock for 3.17
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: dra72-evm: Add i2c1 and tps65917 nodes
  • From: Keerthy <a0393675@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Darryl <ddegraff@xxxxxxxxx>
• Re: [GIT PULL] few omap fixes for v3.17 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Technical Support
  • From: 10.92.79.41.82@xxxxxxxxxxxxxxxxxx
• Re: [GIT PULL] omap gta04 dts changes for v3.17 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 0/9] Beaglebone-Black HDMI audio
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] ARM: dts: am33xx: Add external clock provider
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 10/14] OMAPDSS: hdmi5: Register HDMI audio ASoC drivers from HDMI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 02/14] OMAPDSS: hdmi.h: Add HDMI_AUDIO_LAYOUT_6CH enum value
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 08/14] OMAPDSS: hdmi4: Register HDMI audio ASoC drivers from HDMI driver
  • From: Jyri Sarha <jsarha@xxxxxx>