Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v3 14/14] OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 07/14] OMAPDSS: Kconfig: Update OMAP4_DSS_HDMI_AUDIO option
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 11/14] ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 13/14] OMAPDSS: hdmi5: Remove callbacks for an external ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 06/14] OMAPDSS: hdmi_audio: Integrated ASoC DAI component driver implementation
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 03/14] OMAPDSS: hdmi_common: hdmi_compute_acr is needed for OMAP5 HDMI audio too
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 05/14] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 04/14] OMAPDSS: hdmi_wp: Add function for getting audio dma address
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 12/14] OMAPDSS: hdmi4: Remove callbacks for an external ASoC DAI driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 00/14] Rework OMAP4+ HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 01/14] ARM: OMAP2+: Remove non working OMAP HDMI audio initialization
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 3/3 resend] omap_hsmmc: reuse mmc/slot-gpio for card detect instead of open-coded version
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 2/3 resend] omap_hsmmc: separate card_detect/cover detect logic
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 1/3 resend] omap_hsmmc: reuse mmc/slot-gpio for write protect detection
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 0/3 resend] omap_hsmmc: reuse mmc/slot-gpio functions
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.16
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 04/13] OMAPDSS: hdmi: Make hdmi structure public
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 04/13] OMAPDSS: hdmi: Make hdmi structure public
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: TSC2004 driver
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: TSC2004 driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: TSC2004 driver
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: TSC2004 driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: TSC2004 driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: TSC2004 driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Working in custom board - supporting and patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Working in custom board - supporting and patches
  • From: Boris Vinogradov <no111u3@xxxxxxxxx>
• [PATCH 0/9] Beaglebone-Black HDMI audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 2/9] clk: add gpio controlled clock
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 4/9] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 1/9] ASoC: mcasp: Fix implicit BLCK divider setting
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 5/9] ASoC: davinci: HDMI audio build for AM33XX and TDA998x
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 6/9] ARM: dts: am33xx: Add external clock provider
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 9/9] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 7/9] ARM: dts: am335x-boneblack: Add HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 8/9] ARM: OMAP2+: omap2plus_defconfig: TDA998X HDMI trough tilcdc,slave
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 3/9] drm/tilcdc: Add I2S HDMI audio config for tda998x
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v14 0/6] mmc: omap_hsmmc: Enable SDIO IRQ
  • From: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: pekon@xxxxxxxxxxx
• TSC2004 driver
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH 2/3] ARM: OMAP2+: GPMC: Support Software ECC scheme via DT
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/3] mtd: nand: omap: Revert to using software ECC by default
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/3] ARM: dts: omap3430-sdp: Revert to using software ECC for NAND
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/3] [PATCH 0/3] mtd: nand: omap: Use Software ECC by default
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] remoteproc: use a flag to detect the presence of IOMMU
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 1/2] remoteproc: use a flag to detect the presence of IOMMU
  • From: Suman Anna <s-anna@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] of/clk: use "clkops-clocks" to specify clocks handled by clock_ops domain
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: omap_device: remove warning that clk alias already exists
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 0/1] ARM: OMAP: add external clock provider support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] remoteproc: use a flag to detect the presence of IOMMU
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 0/1] ARM: OMAP: add external clock provider support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [RFC PATCH 2/2] of/clk: use "clkops-clocks" to specify clocks handled by clock_ops domain
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] clk: ti: add support for external clock provider
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 01/19] ARM: OMAP: fix %d confusingly prefixed with 0x in format string
  • From: Hans Wennborg <hans@xxxxxxxxxx>
• Re: [PATCH v3 1/7] ARM: l2c: Refactor the driver to use commit-like interface
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v3 1/7] ARM: l2c: Refactor the driver to use commit-like interface
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Pekon Gupta <pekon.gupta@xxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/1] ARM: OMAP: add external clock provider support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/1] clk: ti: add support for external clock provider
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [GIT PULL] omap gta04 dts changes for v3.17 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] few omap fixes for v3.17 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/2] Manage OMAP34xx ES3.1.2 rev to resume from suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Pekon Gupta <pekon.gupta@xxxxxxxxx>
• Re: [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• [patch] usb: dwc3: omap: signedness bug in dwc3_omap_set_utmi_mode()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.
  • From: Jeremy Vial <jvial@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c
  • From: Jeremy Vial <jvial@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] Manage OMAP34xx ES3.1.2 rev to resume from suspend
  • From: Jeremy Vial <jvial@xxxxxxxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/2] dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/2] dmaengine: edma: Do not register second device when booted with DT
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Stefan Herbrechtsmeier <stefan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Pekon Gupta <pekon.gupta@xxxxxxxxx>
• [PATCH] ARM: dts: DRA7: fix interrupt-cells for GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v4 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v4 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v4 0/3] Add ST dwc3 glue layer driver
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] of/clk: use "clkops-clocks" to specify clocks handled by clock_ops domain
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: clock: allow omap2_dpll_round_rate() to round to next-lowest rate
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2] ARM: AM43xx: hwmod: add DSS hwmod data
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3 1/5] Documentation: dt: add omap mailbox bindings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 3/5] ARM: dts: OMAP2+: Add sub mailboxes device node information
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 4/5] mailbox/omap: adapt to the new mailbox framework
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 5/5] ARM: dts: OMAP2+: Add #mbox-cells property to all mailbox nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 2/5] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv3 0/5] OMAP Mailbox framework adoption & DT support
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [RFC PATCH 2/2] of/clk: use "clkops-clocks" to specify clocks handled by clock_ops domain
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/2] remoteproc: add support to handle internal memories
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/7] dmaengine: omap-dma: complete the transfer on terminate_all
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC PATCH 5/7] arm: dts: am33xx: add DMA properties for UART
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC PATCH 6/7] arm: dts: dra7: add DMA properties for UART
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC PATCH 4/7] serial: 8250_dma: enqueue RX dma again on completion.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/7] serial: 8250_dma: continue TX dma on dma error
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC PATCH 7/7] tty: serial: 8250: omap: add dma support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/7] dmaengine: omap-dma: complete the transfer on terminate_all
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/7] dmaengine: edma: fix two faults which happen with the 8250_dma user
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• dma support for 8250-omap serial driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH 1/2] remoteproc: use a flag to detect the presence of IOMMU
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 13/35] arm: omap: irq: call set_handle_irq() from intc_of_init
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 0/7] OMAP mailbox cleanup
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 13/35] arm: omap: irq: call set_handle_irq() from intc_of_init
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] late omap mailbox clean-up, driver parts
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 30/35] irqchip: add irq-omap-intc.h header
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 30/35] irqchip: add irq-omap-intc.h header
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [PATCH 30/35] irqchip: add irq-omap-intc.h header
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 30/35] irqchip: add irq-omap-intc.h header
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 30/35] irqchip: add irq-omap-intc.h header
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] late omap mailbox clean-up, driver parts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap n900 regression fix for v3.16 rc series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: AM43xx: hwmod: add DSS hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap n900 regression fix for v3.16 rc series
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: PLL rounding change for v3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] remoteproc: add support to handle internal memories
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 1/2] remoteproc: use a flag to detect the presence of IOMMU
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [RFC PATCH 00/10] OMAP: GPMC: NAND: Introduce GPMC APIs for OMAP NAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap n900 regression fix for v3.16 rc series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: Enable TI PIPE3 PHY driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7] OMAP mailbox cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] of/clk: use "clkops-clocks" to specify clocks handled by clock_ops domain
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 00/35] arm: omap: move intc to drivers/irqchip/
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 13/35] arm: omap: irq: call set_handle_irq() from intc_of_init
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 19/35] arm: omap: irq: drop ti,intc-size support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 02/35] arm: omap: irq: define INTC_ILR0 register
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/35] arm: omap: irq: add a global omap_nr_irqs variable
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/35] arm: omap: irq: switch over to intc_readl on omap_intc_handle_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/35] arm: omap: irq: start to remove irq_banks array
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 00/35] arm: omap: move intc to drivers/irqchip/
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 06/35] arm: omap: irq: remove unused macro
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/35] arm: omap: irq: make omap_irq_base global
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 05/35] arm: omap: irq: remove rest of irq_banks usage
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/35] arm: omap: irq: remove unnecessary base_addr argument
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 22/35] arm: omap: irq: call set_handle_irq() from .init_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 13/35] arm: omap: irq: call set_handle_irq() from intc_of_init
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 14/35] arm: omap: irq: use IRQCHIP_DECLARE macro
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 25/35] arm: omap: irq: remove unnecessary header
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 17/35] arm: omap: irq: use compatible flag to figure out number of IRQ lines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 27/35] arm: omap: irq: introduce omap_nr_pending
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/35] arm: omap: irq: rename omap3_intc_regs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 32/35] irq: intc: minor improvement to omap_irq_pending()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 15/35] arm: omap: irq: drop .handle_irq and .init_irq fields
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 29/35] arm: omap: intc: switch over to linear irq domain
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 23/35] arm: omap: irq: drop omap3_intc_handle_irq()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 34/35] irq: intc: remove unnecesary of_address_to_resource() call
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 30/35] irqchip: add irq-omap-intc.h header
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 33/35] irq: intc: comment style cleanup
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 35/35] irq: intc: enable IP protection
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 18/35] arm: boot: dts: am33xx/omap3: fix intc compatible flag
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 11/35] arm: omap: irq: reorganize code a little bit
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 16/35] arm: omap: irq: add specific compatibles for omap3 and am33xx devices
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/35] arm: omap: move intc to drivers/irqchip/
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 24/35] arm: omap: irq: drop omap2_intc_handle_irq()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 26/35] arm: omap: irq: remove nr_irqs argument
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 31/35] arm: omap: irq: move irq.c to drivers/irqchip/
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 21/35] arm: omap: irq: move some more code around
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 28/35] arm: omap: irq: get rid of ifdef hack
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 19/35] arm: omap: irq: drop ti,intc-size support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 10/35] arm: omap: irq: always define omap3 support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 12/35] arm: omap: irq: make intc_of_init static
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 20/35] arm: boot: dts: omap2/3/am33xx: drop ti,intc-size
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [PATCH 1/3] arm: dts: omap3-gta04: Rename gta04.dts to gta04.dtsi and add a4 model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/3] arm: dts: Add gta04a3 model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 3/3] arm: dts: Add gta04a5 model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 0/3] arm: dts: omap3-gta04: Move common parts to include file and add models
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: OMAP3/AM3517 EHCI USB Issue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 2/2] of/clk: use "clkops-clocks" to specify clocks handled by clock_ops domain
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC PATCH 2/2] of/clk: use "clkops-clocks" to specify clocks handled by clock_ops domain
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: generic: add call to of_clk_init()
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/3] ARM/dma: edma: Serve cyclic clients via high priority queue
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 0/2] dma: edma: Allow to disable eDMA IRQ during cyclic transfer
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] ARM: multi_v7_defconfig: Enable TI PIPE3 PHY driver
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: dra72-evm: Enable I2C1 node
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: dra72-evm: Add tps65917 PMIC node
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH 0/2] ARM: dts: dra72-evm: Add i2c1 and tps65917 nodes
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v7 0/5] Input: pixcir_i2c_ts: Add Type-B Multi-touch and DT support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/3] ARM/dma: edma: Serve cyclic clients via high priority queue
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 0/2] ARM: dts: dra72-evm: Add i2c1 and tps65917 nodes
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 2/2] ARM: dts: dra72-evm: Add tps65917 PMIC node
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/2] ARM: dts: dra72-evm: Enable I2C1 node
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/2] ARM: dts: dra72-evm: Add i2c1 and tps65917 nodes
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 0/2] dma: edma: Allow to disable eDMA IRQ during cyclic transfer
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/3] ARM/dma: edma: Serve cyclic clients via high priority queue
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v2 2/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] arm: omap: hwmod: drop unnecessary list initialization
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 0/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 2/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• OMAP baseline test results for v3.16-rc7
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] hwspinlock/omap: enable module before reading SYSSTATUS register
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 1/2] mmc: hsmmc: Add reset gpio configuration option.
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [PATCH 3/3 resend] omap_hsmmc: reuse mmc/slot-gpio for card detect instead of open-coded version
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 2/3 resend] omap_hsmmc: separate card_detect/cover detect logic
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 1/3 resend] omap_hsmmc: reuse mmc/slot-gpio for write protect detection
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 0/3 resend] omap_hsmmc: reuse mmc/slot-gpio functions
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [GIT PULL] non-urgent omap fixes for v3.17 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap soc changes for v3.17 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH CFT v2] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.16-rc6 (corrected)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP baseline test results for v3.16-rc6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCHv2 2/2] gpu: drm: omapdrm: Change struct pat data_pa type to dma_addr_t
  • From: "Matwey V. Kornilov" <matwey.kornilov@xxxxxxxxx>
• [PATCHv2 1/2] gpu: drm: omapdrm: Use %pad format for values of the dma_addr_t type
  • From: "Matwey V. Kornilov" <matwey.kornilov@xxxxxxxxx>
• Re: [PATCH v2] ARM: AM43xx: hwmod: add DSS hwmod data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [GIT PULL] ARM: OMAP2+: PLL rounding change for v3.17
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: dts: Revert enabling of twl configuration for n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3] ARM: dts: am335x-bone: add support for beaglebone LCD4 cape
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: Nokia N900 FB regression?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Antwort: [PATCH v2 3/3] ARM: dts: am335x-bone: add support for beaglebone LCD4 cape
  • From: Hannes Petermaier <Hannes.Petermaier@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: am335x-bone: add support for beaglebone LCD4 cape
  • From: Hannes Petermaier <Hannes.Petermaier@xxxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] ARM: dts: am335x-bone: add support for beaglebone NAND cape
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v2 3/3] ARM: dts: am335x-bone: add support for beaglebone LCD4 cape
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v2 2/3] ARM: dts: am335x-bone: add support for beaglebone NOR cape
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v2 0/3] ARM: dts: am335x-bone: Beaglebone cape DTS
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: Nokia N900 FB regression?
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] gpu: drm: omapdrm: Use %pad format for values of the dma_addr_t type
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] gpu: drm: omapdrm: Use %pad format for values of the dma_addr_t type
  • From: matwey@xxxxxxxxxx
• Re: [PATCH 00/10 linux-next] drivers/usb: remove unnecessary break after goto/return
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 00/10 linux-next] drivers/usb: remove unnecessary break after goto/return
  • From: Fabian Frederick <fabf@xxxxxxxxx>
• Re: [PATCH 1/2] hwspinlock/omap: enable module before reading SYSSTATUS register
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/2] hwspinlock/omap: enable module before reading SYSSTATUS register
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [GIT PULL] Few regression fixes for omaps for v3.16-rc series
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [GIT PULL] omap soc changes for v3.17 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] non-urgent omap fixes for v3.17 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] Few regression fixes for omaps for v3.16-rc series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10 linux-next] drivers/usb: remove unnecessary break after goto/return
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH 00/10 linux-next] drivers/usb: remove unnecessary break after goto/return
  • From: Fabian Frederick <fabf@xxxxxxxxx>
• [PATCH 03/10 linux-next] usb: dcw3: remove unnecessary break after return
  • From: Fabian Frederick <fabf@xxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] power: twl4030_charger: detect battery presence prior to enabling charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drivers/misc/ti-st: Load firmware from ti-connectivity directory.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 0/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH] ARM: OMAP2+: fix gpmc_cs_remap: re-allocating chip-select address space based on DT
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [PATCH v3 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Nokia N900 FB regression?
  • From: Nick Krause <xerofoify@xxxxxxxxx>
• Re: [PATCHv2 06/10] ARM: DRA7: hwmod_data: Add mailbox hwmod data
  • From: Suman Anna <s-anna@xxxxxx>
• Re: omap-wakeupgen.c: Remove function for fix me
  • From: Nick Krause <xerofoify@xxxxxxxxx>
• [PATCH v3 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 0/3] Add ST dwc3 glue layer driver
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH 0/3] Add DRA7xx CPSW Ethernet support in Device Tree
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH 2/3] arm/dts: dra7xx: Add CPSW and MDIO module nodes for dra7xx
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH 3/3] arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH V2 1/2] power: twl4030_charger: detect battery presence prior to enabling charger
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] ARM: dts: dra7-evm: add parallel NOR flash support
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH] ARM: OMAP2+: clock: allow omap2_dpll_round_rate() to round to next-lowest rate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH V2 1/2] power: twl4030_charger: detect battery presence prior to enabling charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 06/10] ARM: DRA7: hwmod_data: Add mailbox hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: generic: add call to of_clk_init()
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v2 0/7] arm: dts: oma3-gta04: Various updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: OMAP: generic: add call to of_clk_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP2+: gpmc: fix gpmc_hwecc_bch_capable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] pinctrl: dra: dt-bindings: Fix pull enable/disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: first set of hwmod data patches for v3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap-wakeupgen.c: Remove function for fix me
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Nokia N900 FB regression?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 2/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers/misc/ti-st: Load firmware from ti-connectivity directory.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Nokia N900 FB regression?
  • From: Nick Krause <xerofoify@xxxxxxxxx>
• Re: Nokia N900 FB regression?
  • From: Nick Krause <xerofoify@xxxxxxxxx>
• Nokia N900 FB regression?
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [GIT PULL] ARM: OMAP2+: first set of hwmod data patches for v3.17
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2] ARM: AM43xx: hwmod: add DSS hwmod data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• omap-wakeupgen.c: Remove function for fix me
  • From: Nick Krause <xerofoify@xxxxxxxxx>
• Re: [v3 PATCH 1/6] drivers: reset: TI: SoC reset controller support.
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 2/7] arm: dts: omap3-gta04: Fix magnetometer model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] arm: dts: omap3-gta04: Fix magnetometer model
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH v2 2/7] arm: dts: omap3-gta04: Fix magnetometer model
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• [PATCH v2 0/7] arm: dts: oma3-gta04: Various updates
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 2/7] arm: dts: omap3-gta04: Fix magnetometer model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 3/7] arm: dts: omap3-gta04: Add wifi reset node
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 4/7] arm: dts: omap3-gta04: Move spi gpio pins to pmx_core2
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 7/7] arm: dts: omap3-gta04: Add twl4030 regulators parameters
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 6/7] arm: dts: omap3-gta04: Add display alias
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 5/7] arm: dts: omap3-gta04: Add USB host support
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH v2 1/7] arm: dts: omap3-gta04: Add nand support
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] ARM: DRA7: hwmod: Add data for RTC
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [v3 PATCH 6/6] ARM: dts: omap5: Add prm_resets node
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [v3 PATCH 5/6] ARM: dts: dra7: Add prm_resets node
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [v3 PATCH 4/6] ARM: dts: am4372: Add prcm_resets node
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [v3 PATCH 3/6] ARM: dts: am33xx: Add prcm_resets node
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [Re-send PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [v3 PATCH 2/6] dt: TI: Describe the ti reset DT entries
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] pinctrl: dra: dt-bindings: Fix pull enable/disable
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] pinctrl: dra: dt-bindings: Fix pull enable/disable
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] pinctrl: dra: dt-bindings: Fix pull enable/disable
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] pinctrl: dra: dt-bindings: Fix pull enable/disable
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] drivers/misc/ti-st: Load firmware from ti-connectivity directory.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] ARM: DRA7: hwmod: Add data for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [Re-send PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 1/7] arm: dts: omap3-gta04: Add nand support
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH V2 1/2] ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/7] arm: dts: omap3-gta04: Add nand support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• [PATCH 1/7] arm: dts: omap3-gta04: Add nand support
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 3/7] arm: dts: omap3-gta04: Add wifi reset node
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/7] arm: dts: omap3-gta04: Fix magnetometer model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 5/7] arm: dts: omap3-gta04: Add USB host support
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 4/7] arm: dts: omap3-gta04: Move spi gpio pins to pmx_core2
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 7/7] arm: dts: omap3-gta04: Add twl4030 regulators parameters
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 6/7] arm: dts: omap3-gta04: Add display alias
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 0/7] arm: dts: oma3-gta04: Various updates
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap soc clean-up for v3.17 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] tty: serial: 8250 core: add runtime pm
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/7] ARM: OMAP4+: PRM: register interrupt information from DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap soc clean-up for v3.17 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 4/7] ARM: OMAP4+: PRM: register interrupt information from DT
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC PATCH 4/7] ARM: OMAP4+: PRM: register interrupt information from DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 4/7] ARM: OMAP4+: PRM: register interrupt information from DT
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC PATCH 3/7] ARM: OMAP4+: PRM: remove "wkup" event
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 7/8] ARM: OMAP2+: timer: Add fallback for of_clk_get
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: OMAP2+: timer: Fix error message to not use hwmod structure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/8] ARM: OMAP2+: timer: Add comment on timer clk parenting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: timer: Simplify clock event/source name setting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/8] ARM: OMAP2+: timer: Add a powerup function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 4/7] ARM: OMAP4+: PRM: register interrupt information from DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 3/7] ARM: OMAP4+: PRM: remove "wkup" event
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: clock cleanup for 3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v3 PATCH 2/6] dt: TI: Describe the ti reset DT entries
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap dts changes for v3.17 merge window, part1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] arm: dts: omap3-gta04: Add missing nodes to fully describe gta04 board
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [GIT PULL] omap dts changes for v3.17 merge window, part1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] iommu/omap: Remove virtual memory manager
  • From: Suman Anna <s-anna@xxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• [PATCH CFT v2] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Michael Welling <mwelling@xxxxxxxxxxx>
• [PATCH v2 3/3] iommu/omap: Remove platform data da_start and da_end fields
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iommu/omap: Remove virtual memory manager
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] ARM: omap: Don't set iommu pdata da_start and da_end fields
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] iommu/omap: Remove virtual memory manager
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/3] iommu: Remove OMAP IOVMM driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] arm: dts: omap3-gta04: Add missing nodes to fully describe gta04 board
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/3] omap_hsmmc: reuse mmc/slot-gpio for card detect instead of open-coded version
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 2/3] omap_hsmmc: separate card_detect/cover detect logic
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 1/3] omap_hsmmc: reuse mmc/slot-gpio for write protect detection
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH 0/3] omap_hsmmc: reuse mmc/slot-gpio functions
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH 1/5] arm: dts: omap3-gta04: Add missing nodes to fully describe gta04 board
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [v3 PATCH 1/6] drivers: reset: TI: SoC reset controller support.
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• Re: AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• AM3517 fails to boot 3.16-rc5 device tree kernel
  • From: mwelling <mwelling@xxxxxxxxxxx>
• OMAP baseline test results for v3.16-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: clock cleanup for 3.17
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH CFT] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [v3 PATCH 4/6] ARM: dts: am4372: Add prcm_resets node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [v3 PATCH 5/6] ARM: dts: dra7: Add prm_resets node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [v3 PATCH 2/6] dt: TI: Describe the ti reset DT entries
  • From: Dan Murphy <dmurphy@xxxxxx>
• [v3 PATCH 6/6] ARM: dts: omap5: Add prm_resets node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [v3 PATCH 1/6] drivers: reset: TI: SoC reset controller support.
  • From: Dan Murphy <dmurphy@xxxxxx>
• [v3 PATCH 3/6] ARM: dts: am33xx: Add prcm_resets node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 3/7] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3 2/7] ARM: l2c: Add interface to ask hypervisor to configure L2C
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3 4/7] ARM: l2c: Add support for overriding prefetch settings
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3 1/7] ARM: l2c: Refactor the driver to use commit-like interface
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3 5/7] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3 7/7] ARM: dts: exynos4: Add nodes for L2 cache controller
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v3 6/7] ARM: EXYNOS: Add support for non-secure L2X0 resume
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] iommu/omap: Remove virtual memory manager
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 0/5] Add Video Processing Front End Support
  • From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH] media:platform: OMAP3 camera support needs VIDEOBUF2_DMA_CONTIG
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] iommu/omap: Remove virtual memory manager
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH CFT] arm: omap1: Migrate debug_ll macros to use 8250.S
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Re-send PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Re-send PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 00/10] ARM: OMAP2+: PRCM cleanup series for 3.17
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 2/5] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCHv2 2/5] mailbox/omap: add support for parsing dt devices
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• Re: [PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [Re-send PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/16] i2c: drop class based instantiaion for selected drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Function Profiler broken on today's linux-next
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Function Profiler broken on today's linux-next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: remove DSP platform device
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/2] staging: tidspbridge: remove driver
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/5] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/5] tty: serial: 8250 core: allow to overwrite & export serial8250_startup()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v4] 8250-core based serial driver for OMAP
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 5/5] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/5] tty: serial: 8250 core: allow to set ->throttle / ->unthrottle callbacks
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/5] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] [RFC-HACK] pinctrl-single: init by postcore_initcall()
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [GIT PULL] omap dts changes for v3.17 merge window, part1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] [RFC-HACK] pinctrl-single: init by postcore_initcall()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] dma: edma: Update caps->residue_granularity to match with reality
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/2] dma: edma: Support to suppress the period interrupts in cyclic mode
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/2] dma: edma: Allow to disable eDMA IRQ during cyclic transfer
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 6/6] tty: serial: Add 8250-core based omap driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] [RFC-HACK] pinctrl-single: init by postcore_initcall()
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: tidspbridge: remove driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: remove DSP platform device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 1/2] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 0/2] ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v4 02/11] memory: emif: Move EMIF register defines to include/linux/
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/6] tty: serial: 8250 core: add runtime pm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] tty: serial: 8250 core: provide a function to export uart_8250_port
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] arm: dts: omap3-gta04: Add missing nodes to fully describe gta04 board
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv2 06/10] ARM: DRA7: hwmod_data: Add mailbox hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Re-send PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [RESEND PATCH 0/8] arm: dts: dra7: Add PCIe data and PCIe PHY data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2] arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 02/11] memory: emif: Move EMIF register defines to include/linux/
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP2+: remove DSP platform device
  • From: Kristina Martšenko <kristina.martsenko@xxxxxxxxx>
• Re: [RFC/PATCH 1/5] Media: platform: Add ti-vpfe driver for AM437x device
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [Re-send PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] arm: omap: hwmod: drop unnecessary list initialization
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/13] ARM: OMAP2+: clock cleanup series for 3.17
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFT/RFC/PATCH 00/31] arm: omap: irq: cleanup INTC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 01/12] ARM: OMAP2+: Remove non working OMAP HDMI audio initialization
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [RFC/PATCH 5/5] ARM: dts: am437x-sk-evm: add vpfe support and ov2659 sensor
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 5/5] ARM: dts: am437x-sk-evm: add vpfe support and ov2659 sensor
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 2/5] arm: omap: hwmod: add hwmod entries for AM437x VPFE
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 4/5] arm: dts: am43x-epos: Add VPFE DTS entries
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 0/5] Add Video Processing Front End Support
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 3/5] arm: boot: dts: am4372: add vpfe DTS entries
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 06/10] ARM: DRA7: hwmod_data: Add mailbox hwmod data
  • From: Suman Anna <s-anna@xxxxxx>
• Re: gpio-omap: wakeup mask
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 06/10] ARM: DRA7: hwmod_data: Add mailbox hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: wakeup mask
  • From: Pascal Huerst <pascal.huerst@xxxxxxxxx>
• Re: [PATCH 1/5] arm: dts: omap3-gta04: Add missing nodes to fully describe gta04 board
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH 0/5] Add gta04 board variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
  • From: Stefan Herbrechtsmeier <stefan@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT/RFC/PATCH 00/31] arm: omap: irq: cleanup INTC driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: gpmc-nand: Use dynamic platform_device_alloc()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: DTS: omap5-uevm: Enable audio (for 3.17)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH 0/8] arm: dts: dra7: Add PCIe data and PCIe PHY data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: DRA7: Add node for RTC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 02/11] memory: emif: Move EMIF register defines to include/linux/
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: DRA7: Add node for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: DRA7: Add node for RTC
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: DRA7: Add node for RTC
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCHv2 0/5] OMAP Mailbox framework adoption & DT support
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCHv2 0/5] OMAP Mailbox framework adoption & DT support
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• Re: [PATCH v4 06/11] remoteproc: wkup_m3: Add wkup_m3 remote proc driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 0/5] Add gta04 board variants
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 3/5] arm: dts: Add gta04a3 model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 4/5] arm: dts: Add gta04+b2 model bindings
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 5/5] arm: dts: Add gta04+b3 model bindings
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 1/5] arm: dts: omap3-gta04: Add missing nodes to fully describe gta04 board
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/5] arm: dts: omap3-gta04: Rename gta04.dts to gta04.dtsi and add a4 model
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH v4 06/11] remoteproc: wkup_m3: Add wkup_m3 remote proc driver
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v4 04/11] ARM: OMAP2+: Use pdata-quirks for wkup_m3 deassert_hardreset
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] ASoC: omap-dmic: Use devm_clk_get
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 00/11] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 01/11] ARM: omap: edma: add suspend suspend/resume hooks
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 11/11] ARM: OMAP2+: AM33XX: Hookup AM33XX PM code into OMAP builds
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 05/11] Documentation: dt: add ti,am3353_wkup_m3 bindings
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 06/11] remoteproc: wkup_m3: Add wkup_m3 remote proc driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 02/11] memory: emif: Move EMIF register defines to include/linux/
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: OMAP baseline test results for v3.16-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 05/11] Documentation: dt: add ti,am3353_wkup_m3 bindings
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: l2c: squelch warning dump on power control setting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: DRA7: Add node for RTC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/5] OMAP Mailbox framework adoption & DT support
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v4 06/11] remoteproc: wkup_m3: Add wkup_m3 remote proc driver
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: DRA7: Add node for RTC
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v4 05/11] Documentation: dt: add ti,am3353_wkup_m3 bindings
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: l2c: squelch warning dump on power control setting
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2] ARM: OMAP2+: l2c: squelch warning dump on power control setting
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v4 00/11] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 11/11] ARM: OMAP2+: AM33XX: Hookup AM33XX PM code into OMAP builds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 02/11] memory: emif: Move EMIF register defines to include/linux/
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 01/11] ARM: omap: edma: add suspend suspend/resume hooks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: l2c: squelch warning dump on power control setting
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [RESEND PATCH 0/8] arm: dts: dra7: Add PCIe data and PCIe PHY data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 4/8] ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 3/8] ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 8/8] ARM: dts: dra7: Add dt data for PCIe controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 6/8] ARM: dts: dra7: Add dt data for PCIe PHY control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 7/8] ARM: dts: dra7: Add dt data for PCIe PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 5/8] ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 1/8] ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH 2/8] ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: l2c: squelch warning dump on power control setting
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2] arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] clk: ti: clk-7xx: Correct ABE DPLL configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v4 00/11] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Andre Heider <a.heider@xxxxxxxxx>
• RE: OMAP2+: gpmc: fix gpmc_hwecc_bch_capable()
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH] ASoC: omap-dmic: Use devm_clk_get
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• ARM: OMAP2+: gpmc: fix gpmc_hwecc_bch_capable()
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Fix Me in file gpmc-onenand.c
  • From: Nick Krause <xerofoify@xxxxxxxxx>
• Re: [PATCH 00/13] ARM: OMAP2+: clock cleanup series for 3.17
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCHv2 2/5] mailbox/omap: add support for parsing dt devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2 01/10] ARM: dts: OMAP2+: Add mailbox fifo and user information
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] ARM: OMAP: generic: add call to of_clk_init()
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCHv2 0/5] OMAP Mailbox framework adoption & DT support
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCHv2 0/5] OMAP Mailbox framework adoption & DT support
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 2/5] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 4/5] mailbox/omap: adapt to the new mailbox framework
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 1/5] Documentation: dt: add omap mailbox bindings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 5/5] ARM: dts: OMAP2+: Add #mbox-cells property to all mailbox nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 3/5] ARM: dts: OMAP2+: Add sub mailboxes device node information
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 09/10] ARM: OMAP4: hwmod_data: Remove legacy mailbox addrs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 10/10] ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 08/10] ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 06/10] ARM: DRA7: hwmod_data: Add mailbox hwmod data
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 05/10] ARM: dts: DRA7: Add mailbox nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 07/10] ARM: OMAP2+: Avoid mailbox legacy device creation for DT-boot
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 04/10] ARM: dts: AM4372: Correct mailbox node data
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 03/10] ARM: dts: AM33xx: Add mailbox node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 02/10] ARM: dts: OMAP4: Add mailbox node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 00/10] OMAP Mailbox DT node/hwmod cleanup
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 01/10] ARM: dts: OMAP2+: Add mailbox fifo and user information
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v4 00/11] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 00/11] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v4 00/11] ARM: OMAP2+: AM33XX: Add suspend-resume support
  • From: Andre Heider <a.heider@xxxxxxxxx>