On Exynos SoCs it is necessary to resume operation of L2C early in assembly code, because otherwise certain systems will crash. This patch adds necessary code to non-secure resume handler. Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx> --- arch/arm/mach-exynos/common.h | 1 + arch/arm/mach-exynos/firmware.c | 4 +++- arch/arm/mach-exynos/sleep.S | 41 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 45 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index c218200..e88c0f9 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -113,6 +113,7 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) extern u32 cp15_save_diag; extern u32 cp15_save_power; +extern unsigned long l2x0_regs_phys; extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 554b350..71bcfbd 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -102,7 +102,9 @@ static int exynos_suspend(void) writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); writel(virt_to_phys(exynos_cpu_resume_ns), sysram_ns_base_addr + EXYNOS_BOOT_ADDR); - +#ifdef CONFIG_CACHE_L2X0 + l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); +#endif return cpu_suspend(0, exynos_cpu_suspend); } diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index e3c3730..b8ce8f0 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -16,6 +16,8 @@ */ #include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> #include "smc.h" #define CPU_MASK 0xff0ffff0 @@ -74,6 +76,40 @@ ENTRY(exynos_cpu_resume_ns) mov r0, #SMC_CMD_C15RESUME dsb smc #0 +#ifdef CONFIG_CACHE_L2X0 + adr r0, l2x0_regs_phys + ldr r0, [r0] + cmp r0, #0 + beq skip_l2x0 + + ldr r1, [r0, #L2X0_R_PHY_BASE] + ldr r2, [r1, #L2X0_CTRL] + tst r2, #0x1 + bne skip_l2x0 + + ldr r1, [r0, #L2X0_R_TAG_LATENCY] + ldr r2, [r0, #L2X0_R_DATA_LATENCY] + ldr r3, [r0, #L2X0_R_PREFETCH_CTRL] + mov r0, #SMC_CMD_L2X0SETUP1 + smc #0 + + /* Reload saved regs pointer because smc corrupts registers. */ + adr r0, l2x0_regs_phys + ldr r0, [r0] + + ldr r1, [r0, #L2X0_R_PWR_CTRL] + ldr r2, [r0, #L2X0_R_AUX_CTRL] + mov r0, #SMC_CMD_L2X0SETUP2 + smc #0 + + mov r0, #SMC_CMD_L2X0INVALL + smc #0 + + mov r1, #1 + mov r0, #SMC_CMD_L2X0CTRL + smc #0 +skip_l2x0: +#endif /* CONFIG_CACHE_L2X0 */ skip_cp15: b cpu_resume ENDPROC(exynos_cpu_resume_ns) @@ -83,3 +119,8 @@ cp15_save_diag: .globl cp15_save_power cp15_save_power: .long 0 @ cp15 power control +#ifdef CONFIG_CACHE_L2X0 + .globl l2x0_regs_phys +l2x0_regs_phys: + .long 0 @ phys address of l2x0 save struct +#endif /* CONFIG_CACHE_L2X0 */ -- 2.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
