Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- [RFC 4/6] ARM: dts: dra7: add entry for bb2d module
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- [RFC 3/6] Documentation: dt: add bindings for ti bb2d
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- [RFC 2/6] drm/etnaviv: allow building etnaviv on omap devices
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- [RFC 1/6] drm/etnaviv: add binding for the gc320 found in ti socs
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [GIT PULL] omap fixes for v4.9-rc cycle
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH -next] ARM: dts: omap5: replace gpio-key,wakeup with wakeup-source property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] arm: plat-omap: Enable timer before accessing hardware register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH net v2 3/7] net: ethernet: ti: cpsw: fix deferred probe
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 6/7] net: ethernet: ti: cpsw: add missing sanity check
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 1/7] net: ethernet: ti: cpsw: fix bad register access in probe error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 4/7] net: ethernet: ti: cpsw: fix of_node and phydev leaks
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 0/7] net: cpsw: fix leaks and probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 2/7] net: ethernet: ti: cpsw: fix mdio device reference leak
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 5/7] net: ethernet: ti: cpsw: fix secondary-emac probe error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 7/7] net: ethernet: ti: cpsw: fix fixed-link phy probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH net v2 7/7] net: ethernet: ti: cpsw: fix fixed-link phy probe deferral
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH -next] ARM: dts: omap5: replace gpio-key,wakeup with wakeup-source property
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH net v2 7/7] net: ethernet: ti: cpsw: fix fixed-link phy probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH -next] ARM: dts: omap5: replace gpio-key,wakeup with wakeup-source property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dmaengine: cppi41: More PM runtime fixes
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH net 1/7] net: ethernet: ti: cpsw: fix bad register access in probe error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH] thermal: ti-soc-thermal: add missing clk_put()
- From: Luis Henriques <henrix@xxxxxxxxxxxx>
- Re: [PATCH net 1/7] net: ethernet: ti: cpsw: fix bad register access in probe error path
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [patch] pinctrl: single: Fix a couple error codes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCHv3 0/6] musb fixes for v4.9-rc cycle
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH 2/2] ARM: am33xx.dtsi: Added syscon compatible prcm_dev device
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH] dmaengine: cppi41: More PM runtime fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: am33xx.dtsi: Added syscon compatible prcm_dev device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] PCI: dra7xx: Add support to force RC to work in GEN1 mode
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 6/6] phy: twl4030-usb: Fix for musb session bit based PM
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [bug report] dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [patch] pinctrl: single: Fix a couple error codes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH net 5/7] net: ethernet: ti: cpsw: fix secondary-emac probe error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net 3/7] net: ethernet: ti: cpsw: fix deferred probe
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net 2/7] net: ethernet: ti: cpsw: fix mdio device reference leak
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net 0/7] net: cpsw: fix leaks and probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net 6/7] net: ethernet: ti: cpsw: add missing sanity check
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net 4/7] net: ethernet: ti: cpsw: fix of_node and phydev leaks
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net 1/7] net: ethernet: ti: cpsw: fix bad register access in probe error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net 7/7] net: ethernet: ti: cpsw: fix fixed-link phy probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- [patch] pinctrl: single: Fix a couple error codes
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH 0/2] Watchdog: omap_wdt: Retrieve bootstatus via syscon
- From: Cor Peters <cpeters@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH v7 7/9] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 6/6] phy: twl4030-usb: Fix for musb session bit based PM
- From: Bin Liu <b-liu@xxxxxx>
- [PATCH 6/6] phy: twl4030-usb: Fix for musb session bit based PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/6] usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/6] usb: musb: Drop pointless PM runtime code for dsps glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/6] usb: musb: Fix PM for hub disconnect
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/6] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/6] usb: musb: Fix broken use of static variable for multiple instances
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCHv3 0/6] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Bin Liu <b-liu@xxxxxx>
- [GIT PULL 5/5] omap defconfig changes for v4.10
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 4/5] drop unused omap platform_data for v4.10
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 3/5] omap device tree changes for v4.10
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 2/5] omap soc changes for v4.10
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 1/5] non-urgent omap fixes for v4.10
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: omap2430: make complain on -EPROBE_DEFER dev_dbg
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH] usb: musb: omap2430: use dev_err
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH] usb: musb: don't complain on -EPROBE_DEFER when initializing controller
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: am33xx.dtsi: Added syscon compatible prcm_dev device
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH] ARM: omap2plus_defconfig: Run make savedefconfig to save some space
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: am33xx.dtsi: Added syscon compatible prcm_dev device
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: am33xx.dtsi: Added syscon compatible prcm_dev device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: am33xx.dtsi: Added syscon compatible prcm_dev device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] bq24190_charger: Fix PM runtime use for bq24190_battery_set_property
- From: Mark Greer <mgreer@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: omap-twl4030: rework probing for device tree only
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: twl4030-usb: make driver DT only
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] Watchdog: omap_wdt: Retrieve bootstatus via syscon
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH] phy: twl4030-usb: make driver DT only
- From: Nicolae Rosia <nicolae.rosia.oss@xxxxxxxxx>
- Re: [PATCH] phy: twl4030-usb: make driver DT only
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 0/5] mfd: tps65217: Improve the IRQ domain feature
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH 4/5] mfd: tps65217: Make an interrupt handler simpler
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH 3/5] mfd: tps65217: Update register interrupt mask bits instead of writing operation
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH 5/5] mfd: tps65217: Support an interrupt pin as the system wakeup
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH 2/5] mfd: tps65217: Specify the IRQ name
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH 1/5] mfd: tps65217: Fix page fault on unloading modules
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- Re: [PATCH 2/2] mfd: twl4030-audio: make module DT only
- From: Nicolae Rosia <nicolae.rosia.oss@xxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH 0/2] Watchdog: omap_wdt: Retrieve bootstatus via syscon (resend)
- From: Cor Peters <cpeters@xxxxxxxxxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- LEDs that change brightness "itself" -- that's a trigger. Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH 1/2] Watchdog: omap_wdt: Retrieve bootstatus via syscon
- From: Cor Peters <cpeters@xxxxxxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH 2/2] mfd: twl4030-audio: make module DT only
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] mfd: twl4030-audio: make module DT only
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH 2/2] ARM: am33xx.dtsi: Added syscon compatible prcm_dev device
- From: Cor Peters <cpeters@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Sekhar Nori <nsekhar@xxxxxx>
- [PATCH 2/2] mfd: twl4030-audio: make module DT only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 1/2] ASoC: omap-twl4030: rework probing for device tree only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 0/2] ASoC: omap-twl4030: remove legacy code
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/2] Two cpp41 pm runtime found when testing with usb
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] bq24190_charger: Fix PM runtime use for bq24190_battery_set_property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] Two cpp41 pm runtime found when testing with usb
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2 1/3] dt/binding: ti-tsc-adc: deprecate ti,charge-delay and add binding doc for ti,charge-delay-ns
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/5] Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] rtc: rtc-twl: cleanup
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] add #pinctrl-cells for v4.10
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] omap fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 5/5] arm: dts: am57xx-idk-common: Add overide powerhold property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 4/5] arm: dts: am57xx-beagle-x15-common: Add overide powerhold property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH -next] PCI: dra7xx: Add missing of_node_put() in dra7xx_pcie_init_irq_domain()
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v7 9/9] DT:omap3+ads7846: use new common touchscreen bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/6] usb: musb: Drop pointless PM runtime code for dsps glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] PCI: dra7xx: Add support to force RC to work in GEN1 mode
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH -next] PCI: dra7xx: Add missing of_node_put() in dra7xx_pcie_init_irq_domain()
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3] dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: twl6030-usb: make driver DT only
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/6] usb: musb: Drop pointless PM runtime code for dsps glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 5/6] usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 0/2] Two cpp41 pm runtime found when testing with usb
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3] dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH] usb: twl6030-usb: make driver DT only
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] dma: cpp41: Fix handling of error path
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 0/2] Two cpp41 pm runtime found when testing with usb
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: Three different LED brightnesses (was Re: PM regression with LED changes in next-20161109)
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 3/4] PCI: dra7xx: Add support to force RC to work in GEN1 mode
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: don't stop ctlr if it was stopped
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v2] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
- Re: [PATCH 0/2] mmc: allow mmc_alloc_host() and tmio_mmc_host_alloc()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Three different LED brightnesses (was Re: PM regression with LED changes in next-20161109)
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Three different LED brightnesses (was Re: PM regression with LED changes in next-20161109)
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH v2 2/3] Input: ti_am335x_tsc: Add support for ti,charge-delay-ns
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: free memory while channel destroy
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 1/6] usb: musb: Fix broken use of static variable for multiple instances
- From: Bin Liu <b-liu@xxxxxx>
- [PATCH v2 3/3] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- [balbi-usb:testing/next 49/126] drivers/usb/dwc3/dwc3-st.c:328:2: error: implicit declaration of function 'pinctrl_pm_select_sleep_state'
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
- Re: [PATCH] input: twl4030_keypad: make driver DT only
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 3/3] rtc: rtc-twl: use irq_of_parse_and_map helper
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: Add minimal support for motorola droid 4 xt894
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: Add minimal support for motorola droid 4 xt894
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 1/4] regulator: twl: make driver DT only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 2/4] regulator: twl: kill unused functions
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 3/4] regulator: twl-regulator: rework fixed regulator definition
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 4/4] regulator: twl: split twl6030 logic into its own file
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 0/4] regulator: twl: preparation for TWL6032 support
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH] mfd: twl-core: make driver DT only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH] mfd: twl-core: export twl_get_regmap
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- Re: [PATCH 3/3] rtc: rtc-twl: use irq_of_parse_and_map helper
- From: Nicolae Rosia <nicolae.rosia.oss@xxxxxxxxx>
- Re: [PATCH 3/3] rtc: rtc-twl: use irq_of_parse_and_map helper
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- [PATCH] input: twl4030_keypad: make driver DT only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH] usb: twl6030-usb: make driver DT only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH] phy: twl4030-usb: make driver DT only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
- Re: [PATCH 0/3] rtc: rtc-twl: cleanup
- From: Nicolae Rosia <nicolae.rosia.oss@xxxxxxxxx>
- [PATCH 3/3] rtc: rtc-twl: use irq_of_parse_and_map helper
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 2/3] rtc: rtc-twl: make driver DT only
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 1/3] rtc: rtc-twl: kill static variables
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 0/3] rtc: rtc-twl: cleanup
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- Re: [PATCH -next] PCI: dra7xx: Add missing of_node_put() in dra7xx_pcie_init_irq_domain()
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCHv2 0/6] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Bin Liu <b-liu@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH -next] PCI: dra7xx: Add missing of_node_put() in dra7xx_pcie_init_irq_domain()
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 3/4] PCI: dra7xx: Add support to force RC to work in GEN1 mode
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] pinctrl: single: search for the bits property when parsing bits
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 1/2] pinctrl: single: check for any error when getting rows
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/6] usb: musb: Fix broken use of static variable for multiple instances
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH] PM / wakeirq: report wakeup events in dedicated wake-IRQs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/6] usb: musb: Fix broken use of static variable for multiple instances
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] dma: cpp41: Fix handling of error path
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 14/14] ARM: OMAP2+: Drop legacy sdram timings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 13/14] ARM: OMAP2+: Drop legacy ads7846 init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 12/14] ARM: OMAP2+: Remove legacy board-flash.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 11/14] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 08/14] ARM: OMAP2+: Remove legacy hwmod mux code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 07/14] ARM: OMAP2+: Remove legacy usb-musb.c platform init code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 06/14] ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 05/14] ARM: OMAP2+: Remove legacy usb-host.c platform init code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 04/14] ARM: OMAP2+: Remove legacy twl4030 platform init code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/14] ARM: OMAP2+: Remove legacy PM init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 02/14] ARM: OMAP2+: Remove legacy i2c.c platform init code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 01/14] ARM: OMAP2+: Remove legacy serial.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 00/14] Drop some unused omap platform_data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v7 9/9] DT:omap3+ads7846: use new common touchscreen bindings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 8/9] drivers:input:ads7846(+tsc2046): fix spi module table
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 0/9] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 7/9] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 6/9] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 1/9] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 2/9] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 5/9] DT:omap3+tsc2007: use new common touchscreen bindings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v7 3/9] drivers:input:tsc2007: check for presence and power down tsc2007 during probe
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH 3/6] usb: musb: Fix PM for hub disconnect
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 6/6] usb: musb: Drop pointless PM runtime code for dsps glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/6] usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/6] phy: twl4030-usb: Fix for musb session bit based PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/6] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/6] usb: musb: Fix broken use of static variable for multiple instances
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCHv2 0/6] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap3: dts: Fix memory node in Torpedo board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] net: ethernet: ti: davinci_cpdma: don't stop ctlr if it was stopped
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH v2] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH v2] net: ethernet: ti: davinci_cpdma: free memory while channel destroy
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH] ARM: omap3: dts: Fix memory node in Torpedo board
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: John Syne <john3909@xxxxxxxxx>
- Re: [PATCH 0/2] mmc: allow mmc_alloc_host() and tmio_mmc_host_alloc()
- From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: "ivan.khoronzhuk" <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v2 1/3] dt/binding: ti-tsc-adc: deprecate ti,charge-delay and add binding doc for ti,charge-delay-ns
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Remove unused MUSB initialization code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Remove unused MUSB initialization code
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Remove unused MUSB initialization code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP2+: Remove unused MUSB initialization code
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2 0/3] increase TSCADC clock to 24MHz and fix ti,charge-delay to represent in nS
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] mmc: allow mmc_alloc_host() to return proper error code
- From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH 0/2] mmc: allow mmc_alloc_host() and tmio_mmc_host_alloc()
- From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
- Re: [PATCH 0/2] mmc: allow mmc_alloc_host() and tmio_mmc_host_alloc()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4] regulator: lp873x: Add support for populating input supply
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v4] regulator: lp873x: Add support for populating input supply
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- [PATCH v2 3/5] mfd: palmas: Reset the POWERHOLD mux during power off
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 0/5] mfd: palmas: add powerhold overriding during power off
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 1/5] Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 2/5] mfd: palmas: Remove redundant check in palmas_power_off
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 4/5] arm: dts: am57xx-beagle-x15-common: Add overide powerhold property
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 5/5] arm: dts: am57xx-idk-common: Add overide powerhold property
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH 1/4] Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH 2/4] mfd: palmas: Reset the POWERHOLD mux during power off
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: John Syne <john3909@xxxxxxxxx>
- Re: [PATCH v2 0/9] ARM: DRA7: Add support for DRA718-evm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am335x-baltos: don't reset gpio3 block
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: am33xx: Add clock info to rtc nodes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap3: Add missing memory node in SOM-LV
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am335x-baltos-ir5221: use both musb channels in host mode
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: ARM: AMx3xx/DRA7: crypto IP support data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 5/8] DT:omap3+tsc2007: use new common touchscreen bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/4] ARM: dts: am33xx: add DMA properties for tscadc
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 0/3] ARM: dts: omap5 uevm: add LEDs, USR1 button and EEPROM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 4/9] regulator: lp873x: Add support for populating input supply
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/5] ARM: OMAP: dead code removal
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] ARM: OMAP2+: Remove the omapdss_early_init_of() function
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/8] Support TPS65217 PMIC interrupt in DT
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: PM regression with LED changes in next-20161109
- From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
- PM regression with LED changes in next-20161109
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 4/9] regulator: lp873x: Add support for populating input supply
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: omap2430: make complain on -EPROBE_DEFER dev_dbg
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: omap2430: use dev_err
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: don't complain on -EPROBE_DEFER when initializing controller
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: ehci-omap: don't complain on -EPROBE_DEFER when no PHY found
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] dma: cppi41: Fix unpaired pm runtime when only a USB hub is connected
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] dma: cppi41: Fix list not empty warning on module removal
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/2] Two cpp41 pm runtime found when testing with usb
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] mfd: palmas: Reset the POWERHOLD mux during power off
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/4] Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] pinctrl: single: fixes for davinci
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] pinctrl: single: check for any error when getting rows
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mfd: tps65217: Drop call to irq_set_parent()
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH v2 2/2] pinctrl: single: search for the bits property when parsing bits
- From: Axel Haslam <ahaslam@xxxxxxxxxxxx>
- [PATCH v2 1/2] pinctrl: single: check for any error when getting rows
- From: Axel Haslam <ahaslam@xxxxxxxxxxxx>
- [PATCH v2 0/2] pinctrl: single: fixes for davinci
- From: Axel Haslam <ahaslam@xxxxxxxxxxxx>
- [PATCH] pinctrl: single: check for any error when getting rows
- From: Axel Haslam <ahaslam@xxxxxxxxxxxx>
- [PATCH] usb: musb: omap2430: make complain on -EPROBE_DEFER dev_dbg
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] usb: musb: omap2430: use dev_err
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] usb: musb: don't complain on -EPROBE_DEFER when initializing controller
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] usb: ehci-omap: don't complain on -EPROBE_DEFER when no PHY found
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] sound: omap-twl4030: do not complain on -EPROBE_DEFER
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH net v2 2/4] net: ethernet: ti: cpsw: fix device and of_node leaks
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: davinci_cpdma: free memory while channel destroy
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH net v2 2/4] net: ethernet: ti: cpsw: fix device and of_node leaks
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] usb: musb: Fix broken use of static variable for multiple instances
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/5] ARM: OMAP: dead code removal
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] net: ethernet: ti: davinci_cpdma: free memory while channel destroy
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH] net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configuration
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/5] ARM: OMAP: dead code removal
- From: Nicolae Rosia <nicolae.rosia.oss@xxxxxxxxx>
- Re: [PATCH resent v3 3/3] ASoC: omap-abe-twl6040: fix typo in bindings documentation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: avoid NULL pointer dereference
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH RESEND] ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/4] phy: twl4030-usb: Fix for musb session bit based PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/4] usb: musb: Fix PM for hub disconnect
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/4] usb: musb: Fix sleeping function called from invalid context for hdrc glue
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/4] usb: musb: Fix broken use of static variable for multiple instances
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/4] musb fixes for v4.9-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] Add memremap executable mapping and extend drivers/misc/sram.c
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] Add memremap executable mapping and extend drivers/misc/sram.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: Add #pinctrl-cells for pinctrl-single instances
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] Add memremap executable mapping and extend drivers/misc/sram.c
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: am33xx: Add clock info to rtc nodes
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH 2/5] drivers: gpio: Add support for multiple IPs
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH v2 0/9] ARM: DRA7: Add support for DRA718-evm
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/4] ARM: dts: am33xx: add DMA properties for tscadc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/4] drivers: iio: ti_am335x_adc: add dma support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] drivers: gpio: Add support for multiple IPs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/3] Add memremap executable mapping and extend drivers/misc/sram.c
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] rtc: omap: Fix selecting external osc
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Documentation: bindings: fix twl-rtc documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: Add #pinctrl-cells for pinctrl-single instances
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 3/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,bits
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 10/10] clk: ti: make clk-dra7-atl explicitly non-modular
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 2/5] drivers: gpio: Add support for multiple IPs
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv6] support for AD5820 camera auto-focus coil
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/5] drivers: gpio: Add support for multiple IPs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v2 5/5] ARM: OMAP: kill omap_pmic_init
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH v2 4/5] ARM: OMAP2: kill omap2_pmic_init
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH v2 3/5] ARM: OMAP3: kill omap3_pmic_init
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH v2 2/5] ARM: OMAP3: kill omap3_pmic_get_config and twl_{get,set}_voltage
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH v2 1/5] ARM: OMAP4: kill omap4_pmic_init and omap4_pmic_get_config
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH v2 0/5] ARM: OMAP: dead code removal
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCHv6] support for AD5820 camera auto-focus coil
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCHv6] support for AD5820 camera auto-focus coil
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] ARM: OMAP3: Fix formatting of features printed
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH net v2 2/4] net: ethernet: ti: cpsw: fix device and of_node leaks
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH net v2 3/4] net: ethernet: ti: davinci_emac: fix device reference leak
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCHv2] ARM: OMAP3: Fix formatting of features printed
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCHv2 0/4] Generic #pinctrl-cells and and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,bits
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: Add #pinctrl-cells for pinctrl-single instances
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv6] support for AD5820 camera auto-focus coil
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v3 2/3] Documentation: dt: add bindings for ti-cpufreq
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- omap watchdog boot status
- From: Cor Peters <cpeters@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] Documentation: dt: add bindings for ti-cpufreq
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH 0/5] ARM: OMAP: dead code removal
- From: Joshua Clayton <stillcompiling@xxxxxxxxx>
- [PATCH] ARM: dts: am335x-baltos: don't reset gpio3 block
- From: yegorslists@xxxxxxxxxxxxxx
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v2 4/9] regulator: lp873x: Add support for populating input supply
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- Re: [PATCH v3 3/3] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH v3 2/3] Documentation: dt: add bindings for ti-cpufreq
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 0/2] musb-fixes for v4.9-rc2
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- OMAP3630 + TWL430-RTC failures
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH 5/5] ARM: OMAP: kill omap_pmic_init
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 4/5] ARM: OMAP2: kill omap2_pmic_init
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 3/5] ARM: OMAP3: kill omap3_pmic_init
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 2/5] ARM: OMAP3: kill omap3_pmic_get_config and twl_{get,set}_voltage
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 1/5] ARM: OMAP4: kill omap4_pmic_init and omap4_pmic_get_config
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH 0/5] ARM: OMAP: dead code removal
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [balbi-usb:testing/next 52/83] drivers/usb/dwc3/host.c:66:37: error: 'dwc3_pdev' undeclared
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- [PATCH] ARM: OMAP2+: avoid NULL pointer dereference
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- [PATCH] Documentation: bindings: fix twl-rtc documentation
- From: Nicolae Rosia <Nicolae_Rosia@xxxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v3 1/3] PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Matt Ranostay <matt@ranostay.consulting>
- Re: [PATCH 2/5] drivers: gpio: Add support for multiple IPs
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: Vignesh R <vigneshr@xxxxxx>
- [balbi-usb:testing/next 49/82] drivers/usb/dwc3/dwc3-st.c:328:2: error: implicit declaration of function 'pinctrl_pm_select_sleep_state'
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- [balbi-usb:testing/next 82/82] drivers/usb/dwc3/dwc3-pci.c:118:4: error: implicit declaration of function 'acpi_str_to_uuid'
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 6/8] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [PATCH resent v3 3/3] ASoC: omap-abe-twl6040: fix typo in bindings documentation
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: Add #pinctrl-cells for pinctrl-single instances
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 4/9] regulator: lp873x: Add support for populating input supply
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 10/15] ASoC: omap-mcbsp: use permission-specific DEVICE_ATTR variants
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH 10/15] ASoC: omap-mcbsp: use permission-specific DEVICE_ATTR variants
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- [PATCH 00/15] use permission-specific DEVICE_ATTR variants
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH 10/15] ASoC: omap-mcbsp: use permission-specific DEVICE_ATTR variants
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- Re: [PATCHv4 11/15] clk: ti: clockdomain: add clock provider support to clockdomains
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv4 00/15] clk: ti: add support for hwmod clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCHv4 11/15] clk: ti: clockdomain: add clock provider support to clockdomains
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] net: cpsw: fix obtaining mac address for am3517
- From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] net: cpsw: fix obtaining mac address for am3517
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: MUSB Error Conditions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] net: cpsw: fix obtaining mac address for am3517
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- MUSB Error Conditions
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH resent v3 2/3] dts: omap5: board-common: enable twl6040 headset jack detection
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] Few pinctrl-single clean-ups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv4 11/15] clk: ti: clockdomain: add clock provider support to clockdomains
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 2/8] ARM: dts: tps65217: Add the charger device
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 1/8] ARM: dts: tps65217: Specify the interrupt controller
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 3/8] ARM: dts: tps65217: Add the power button device
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 4/8] ARM: dts: am335x: Support the PMIC interrupt
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 6/8] ARM: dts: am335x: Add the charger interrupt
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 5/8] dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 8/8] mfd: tps65217: Fix mismatched interrupt number
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 7/8] ARM: dts: am335x: Add the power button interrupt
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- [PATCH v2 0/8] Support TPS65217 PMIC interrupt in DT
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- Re: [PATCH 2/2] pinctrl: single: Drop pointless macro
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/2] Few pinctrl-single clean-ups
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCHv4 11/15] clk: ti: clockdomain: add clock provider support to clockdomains
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCHv4 00/15] clk: ti: add support for hwmod clocks
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v3 1/3] PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 7/7] mfd: tps65217: Fix mismatched interrupt number
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- Re: [PATCH 5/7] ARM: dts: am335x: Add the charger interrupt
- From: Milo Kim <woogyom.kim@xxxxxxxxx>
- Re: [PATCHv4 00/15] clk: ti: add support for hwmod clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCHv4 11/15] clk: ti: clockdomain: add clock provider support to clockdomains
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH v3 3/3] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
- From: Dave Gerlach <d-gerlach@xxxxxx>
- [PATCH v3 2/3] Documentation: dt: add bindings for ti-cpufreq
- From: Dave Gerlach <d-gerlach@xxxxxx>
- [PATCH v3 1/3] PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
- From: Dave Gerlach <d-gerlach@xxxxxx>
- [PATCH v3 0/3] cpufreq: Introduce TI CPUFreq/OPP Driver
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH 0/2] Few pinctrl-single clean-ups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: John Syne <john3909@xxxxxxxxx>
- Re: [PATCH 0/2] Few pinctrl-single clean-ups
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/3] Add memremap executable mapping and extend drivers/misc/sram.c
- From: Dave Gerlach <d-gerlach@xxxxxx>
- [PATCH 1/3] ARM: memremap: implement arch_memremap_exec/exec_nocache
- From: Dave Gerlach <d-gerlach@xxxxxx>
- [PATCH 3/3] misc: SRAM: Add option to map SRAM to allow code execution
- From: Dave Gerlach <d-gerlach@xxxxxx>
- [PATCH 2/3] memremap: add MEMREMAP_EXEC and MEMREMAP_EXEC_NOCACHE flags
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/5] drivers: gpio: Add support for multiple IPs
- From: Roger Quadros <rogerq@xxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 4/5] ARM: DRA7: PM: cpuidle MPU CSWR support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/2] Few pinctrl-single clean-ups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] pinctrl: single: Drop custom names
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: OMAP3630 Processor Detection
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH v6 2/8] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH 4/4] arm: dts: am57xx-idk-common: Add overide powerhold property
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v6 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v6 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v6 5/8] DT:omap3+tsc2007: use new common touchscreen bindings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v6 8/8] DT:omap3+ads7846: use new common touchscreen bindings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH 0/4] Generic #pinctrl-cells and and pinctrl_parse_index_with_args
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/2] Few pinctrl-single clean-ups
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/5] Minimal cpuidle fixes for omap5 and dra7
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH 2/2] rtc: omap: prevent disabling of clock/module during suspend
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 1/2] rtc: omap: Fix selecting external osc
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 3/3] ARM: dts: AM335X-evmsk: Add the internal and external clock nodes for rtc
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 2/3] ARM: dts: AM335X-evm: Add the internal and external clock nodes for rtc
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 1/3] ARM: dts: AM335X-bone-common: Add the internal and external clock nodes for rtc
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 0/3] ARM: dts: am33xx: Add clock info to rtc nodes
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH 2/5] drivers: gpio: Add support for multiple IPs
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH 5/5] gpio: davinci: Add a separate compatible for k2g
- From: Keerthy <j-keerthy@xxxxxx>
- Re: OMAP3630 Processor Detection
- From: Nishanth Menon <nm@xxxxxx>
- OMAP3630 Processor Detection
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH 0/5] Minimal cpuidle fixes for omap5 and dra7
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 5/5] gpio: davinci: Add a separate compatible for k2g
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 0/5] Minimal cpuidle fixes for omap5 and dra7
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 2/5] ARM: OMAP5: Fix mpuss_early_init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/5] Minimal cpuidle fixes for omap5 and dra7
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxxxxxx>
- [PATCH 5/5] ARM: OMAP5: Enable minimal cpuidle for omap5 retention
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/5] ARM: DRA7: PM: cpuidle MPU CSWR support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/5] ARM: OMAP4+: Fix bad fallthrough for cpuidle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/5] ARM: OMAP5: Fix mpuss_early_init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/5] ARM: OMAP5: Fix build for PM code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/5] Minimal cpuidle fixes for omap5 and dra7
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 1/2] pinctrl: single: Drop custom names
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 7/7] mfd: tps65217: Fix mismatched interrupt number
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 0/7] mfd: Fix all W=1 warnings
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] mfd: tps65217: Drop call to irq_set_parent()
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] mfd: tps65217: Drop call to irq_set_parent()
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] mfd: tps65217: Drop call to irq_set_parent()
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] mfd: tps65217: Drop call to irq_set_parent()
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] mfd: ti_am335x_tscadc: store physical address
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [GIT PULL] Immutable branch between MFD, GPIO, Input and Regulator due for the v4.10 merge window
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH resent v3 2/3] dts: omap5: board-common: enable twl6040 headset jack detection
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH resent v3 3/3] ASoC: omap-abe-twl6040: fix typo in bindings documentation
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 2/5] pinctrl: core: Add generic pinctrl functions for managing groups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/5] pinctrl: core: Use delayed work for hogs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/5] Add generic pinctrl helpers for managing groups and functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/5] pinctrl: core: Add generic pinctrl functions for managing groups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/5] pinctrl: single: Use generic pinmux helpers for managing functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/5] pinctrl: single: Use generic pinctrl helpers for managing groups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v5 6/8] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 2/8] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 7/8] drivers:input:ads7846(+tsc2046): fix spi module table
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 3/8] drivers:input:tsc2007: check for presence and power down tsc2007 during probe
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 5/8] DT:omap3+tsc2007: use new common touchscreen bindings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 8/8] DT:omap3+ads7846: use new common touchscreen bindings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v5 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] power: bq27xxx_battery: add poll interval property query
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH resent v3 3/3] ASoC: omap-abe-twl6040: fix typo in bindings documentation
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH resent v3 0/3] DT Fixes for OMAP5 boards
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH resent v3 1/3] dts: omap5: board-common: add phandle to reference Palmas gpadc
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH resent v3 2/3] dts: omap5: board-common: enable twl6040 headset jack detection
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] dts: omap5: baord-common: enable twl6040 headset jack detection
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 2/3] dts: omap5: board-common: enable twl6040 headset jack detection
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v3 2/3] dts: omap5: board-common: enable twl6040 headset jack detection
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v3 1/3] dts: omap5: board-common: add phandle to reference Palmas gpadc
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v3 0/3] DT Fixes for OMAP5 boards
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v3 3/3] ASoC: omap-abe-twl6040: fix typo in bindings documentation
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] dts: omap5: baord-common: enable twl6040 headset jack detection
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] dts: omap5: baord-common: enable twl6040 headset jack detection
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] dts: omap5: baord-common: enable twl6040 headset jack detection
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 1/2] dts: omap5: baord-common: add phandle to reference Palmas gpadc
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v2 0/2] DT Fixes for OMAP5 boards
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v2 2/2] dts: omap5: baord-common: enable twl6040 headset jack detection
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: Add #pinctrl-cells for pinctrl-single instances
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,bits
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/4] Generic #pinctrl-cells and and pinctrl_parse_index_with_args
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] pinctrl: single: Drop custom names
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] pinctrl: single: Drop pointless macro
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/2] Few pinctrl-single clean-ups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: John Syne <john3909@xxxxxxxxx>
- Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz
- From: John Syne <john3909@xxxxxxxxx>
- Re: OMAP4 warning on OMAP3 Board on 4.9-RC1/2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: OMAP3 CPU Info has weird output in 4.9-RC1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb RPM sleep-while-atomic in 4.9-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: OMAP3 CPU Info has weird output in 4.9-RC1
- From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
- OMAP4 warning on OMAP3 Board on 4.9-RC1/2
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: OMAP3 CPU Info has weird output in 4.9-RC1
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [RFC] shutdown machine when li-ion battery goes below 3V
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [RFC] shutdown machine when li-ion battery goes below 3V
- From: Pavel Machek <pavel@xxxxxx>
- Re: [RFC] shutdown machine when li-ion battery goes below 3V
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [RFC] shutdown machine when li-ion battery goes below 3V
- From: Pavel Machek <pavel@xxxxxx>
- Re: [RFC] shutdown machine when li-ion battery goes below 3V
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- [PATCH 0/2] dmaengine: core/omap-dma: Support for port window
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/2] dmaengine: dma_slave_config: add support for slave port window
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [RFC] shutdown machine when li-ion battery goes below 3V
- From: Pavel Machek <pavel@xxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]