* Tony Lindgren <tony@xxxxxxxxxxx> [161103 13:59]:
> * Ladislav Michl <ladis@xxxxxxxxxxxxxx> [161101 14:14]:
> > > cacaaf80c3a6 ("usb: musb: Call pm_runtime from musb_gadget_queue")
> > > d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error")
> >
> > tested with v4.9-rc3 which have these included.
>
> OK thanks.
So here's something to test, v4.9-rc3 + the PHY patch I
posted + the patch below.
> Hmm yeah playing with a hub connected devices don't always enumerate.
> When that happens, I get this:
>
> usb 1-1: reset high-speed USB device number 45 using musb-hdrc
> usb 1-1: reset high-speed USB device number 45 using musb-hdrc
> usb 1-1: reset high-speed USB device number 45 using musb-hdrc
> usb 1-1: USB disconnect, device number 45
> usb 1-1: new high-speed USB device number 47 using musb-hdrc
> usb 1-1: new high-speed USB device number 48 using musb-hdrc
> ...
>
> And that keeps on going until I reconnect the hub.
The patch below seems to work with PM for me, except I
the dsps glue layer won't go to idle after disconnecting
the hub. On 2430 glue layer things idle for me properly
and I don't seem to get any more vbus errors.
Regards,
Tony
8< ------------------
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -987,7 +987,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
}
#endif
- schedule_work(&musb->irq_work);
+ schedule_delayed_work(&musb->irq_work, 0);
return handled;
}
@@ -1864,12 +1864,8 @@ static void musb_pm_runtime_check_session(struct musb *musb)
}
break;
case MUSB_QUIRK_A_DISCONNECT_19:
- if (!musb->session)
- break;
- musb_dbg(musb, "Allow PM on possible host mode disconnect");
- pm_runtime_mark_last_busy(musb->controller);
- pm_runtime_put_autosuspend(musb->controller);
- musb->session = false;
+ musb_dbg(musb, "Poll devctl on possible host mode disconnect");
+ schedule_delayed_work(&musb->irq_work, msecs_to_jiffies(1000));
return;
default:
break;
@@ -1900,7 +1896,7 @@ static void musb_pm_runtime_check_session(struct musb *musb)
/* Only used to provide driver mode change events */
static void musb_irq_work(struct work_struct *data)
{
- struct musb *musb = container_of(data, struct musb, irq_work);
+ struct musb *musb = container_of(data, struct musb, irq_work.work);
musb_pm_runtime_check_session(musb);
@@ -2274,7 +2270,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_generic_disable(musb);
/* Init IRQ workqueue before request_irq */
- INIT_WORK(&musb->irq_work, musb_irq_work);
+ INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
INIT_DELAYED_WORK(&musb->finish_resume_work, musb_pending_work);
@@ -2370,7 +2366,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_host_cleanup(musb);
fail3:
- cancel_work_sync(&musb->irq_work);
+ cancel_delayed_work_sync(&musb->irq_work);
musb_cancel_resume_work(musb);
cancel_delayed_work_sync(&musb->deassert_reset_work);
if (musb->dma_controller)
@@ -2437,7 +2433,7 @@ static int musb_remove(struct platform_device *pdev)
*/
musb_exit_debugfs(musb);
- cancel_work_sync(&musb->irq_work);
+ cancel_delayed_work_sync(&musb->irq_work);
musb_cancel_resume_work(musb);
cancel_delayed_work_sync(&musb->deassert_reset_work);
pm_runtime_get_sync(musb->controller);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -310,7 +310,7 @@ struct musb {
struct musb_context_registers context;
irqreturn_t (*isr)(int, void *);
- struct work_struct irq_work;
+ struct delayed_work irq_work;
struct delayed_work deassert_reset_work;
struct delayed_work finish_resume_work;
u16 hwvers;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1114,7 +1114,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
musb_ep->dma ? "dma, " : "",
musb_ep->packet_sz);
- schedule_work(&musb->irq_work);
+ schedule_delayed_work(&musb->irq_work, 0);
fail:
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1158,7 +1158,7 @@ static int musb_gadget_disable(struct usb_ep *ep)
musb_ep->desc = NULL;
musb_ep->end_point.desc = NULL;
- schedule_work(&musb->irq_work);
+ schedule_delayed_work(&musb->irq_work, 0);
spin_unlock_irqrestore(&(musb->lock), flags);
@@ -1982,7 +1982,7 @@ static int musb_gadget_stop(struct usb_gadget *g)
*/
/* Force check of devctl register for PM runtime */
- schedule_work(&musb->irq_work);
+ schedule_delayed_work(&musb->irq_work, 0);
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -724,7 +724,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
idle_timeout = jiffies + (1 * HZ);
- schedule_work(&musb->irq_work);
+ schedule_delayed_work(&musb->irq_work, 0);
} else /* A-dev state machine */ {
dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
@@ -814,7 +814,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
break;
}
}
- schedule_work(&musb->irq_work);
+ schedule_delayed_work(&musb->irq_work, 0);
return idle_timeout;
}
@@ -864,7 +864,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
if (reg & ~TUSB_PRCM_WNORCS) {
musb->is_active = 1;
- schedule_work(&musb->irq_work);
+ schedule_delayed_work(&musb->irq_work, 0);
}
dev_dbg(musb->controller, "wake %sactive %02x\n",
musb->is_active ? "" : "in", reg);
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
