Hi,
On Mon, Oct 24, 2016 at 11:07:08AM -0700, Tony Lindgren wrote:
> Hi,
>
> * Tony Lindgren <tony@xxxxxxxxxxx> [161021 00:18]:
> > * Ladislav Michl <ladis@xxxxxxxxxxxxxx> [161020 12:37]:
> > > [ 186.457519] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_wait_bcon (90, <VBusValid), retry #3, port1 0008010c
> > >
> > > And that's the end, since now it does not react on hub plug/unplug.
> > >
> > > Also all that VBUS_ERROR conditions are strange as hub is powered separately
> > > and power lines from phy are not used.
> >
> > Hmm yeah. I'd like to be able to reproduce this. Can you email me
> > your .config (again)? You have things in host mode with a powered
> > hub plus few devices with no USB gadgets configured?
>
> Well I found your earlier .config so presumably that did not change.
> Below patch seems to do the trick for me, but I need to test more.
>
> Care to test if it helps for you? Please test with v4.9-rc2 and the
> following two fixes heading in Greg's usb-linus branch:
>
> cacaaf80c3a6 ("usb: musb: Call pm_runtime from musb_gadget_queue")
> d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error")
tested with v4.9-rc3 which have these included.
> I'll send a proper patch if that works for you.
Unfortunately it's still the same. Direct connection (without hub) remains
untested as there's not enough power to supply display:
usb 2-1: USB disconnect, device number 2
usb 2-1: new high-speed USB device number 3 using musb-hdrc
usb 2-1: New USB device found, idVendor=17e9, idProduct=0335
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: MIMO
usb 2-1: Manufacturer: DisplayLink
usb 2-1: SerialNumber: 1071007195
usb 2-1: rejected 1 configuration due to insufficient available bus power
usb 2-1: no configuration chosen from 1 choice
Regards,
ladis
> Regards,
>
> Tony
>
> 8< ------------------------
> diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
> --- a/drivers/phy/phy-twl4030-usb.c
> +++ b/drivers/phy/phy-twl4030-usb.c
> @@ -459,8 +459,6 @@ static int twl4030_phy_power_off(struct phy *phy)
> struct twl4030_usb *twl = phy_get_drvdata(phy);
>
> dev_dbg(twl->dev, "%s\n", __func__);
> - pm_runtime_mark_last_busy(twl->dev);
> - pm_runtime_put_autosuspend(twl->dev);
>
> return 0;
> }
> @@ -472,6 +470,8 @@ static int twl4030_phy_power_on(struct phy *phy)
> dev_dbg(twl->dev, "%s\n", __func__);
> pm_runtime_get_sync(twl->dev);
> schedule_delayed_work(&twl->id_workaround_work, HZ);
> + pm_runtime_mark_last_busy(twl->dev);
> + pm_runtime_put_autosuspend(twl->dev);
>
> return 0;
> }
> --
> 2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
