Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 3/3] ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 2/3] ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 1/3] ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v7 0/5] mfd: tps65218: Clean ups
  • From: Keerthy <a0393675@xxxxxx>
• Page allocation error followed by DMA error & followed by "Detected aborted Journal" error
  • From: Ankur Tank <ankurtank.linux@xxxxxxxxx>
• [PATCH] dmaengine: omap-dma: Enable burst and data pack for SG
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v6] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: v4.8-rc: GSM audio causes trouble
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 0/9] dmaengine: ti drivers: enable COMPILE_TESTing
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/9] dmaengine: edma: Add missing MODULE_DEVICE_TABLE() for of_device_id structs
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 4/9] dmaengine: edma: enable COMPILE_TEST
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/9] dmaengine: edma: Use correct type for of_find_property() third parameter
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 9/9] dmaengine: ti-dma-crossbar: enable COMPILE_TEST
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 6/9] dmaengine: omap-dma: enable COMPILE_TEST
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 8/9] dmaengine: ti-dma-crossbar: Use enum for crossbar type
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 5/9] dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 7/9] dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/9] dmaengine: edma: Use enum for eDMA binding type (legacy vs TPCC)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: v4.8-rc: GSM audio causes trouble
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.8-rc: GSM audio causes trouble
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] tools: iio: fix iio build error by adding KBUILD_OUTPUT support to makefile
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15-common: Fix wrong pinctrl selection for mmc2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] regmap: Allow longer flag masks for read and write
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] regma: Add missing little endian functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Improve regmap support for more exotic devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4.8-rc: GSM audio causes trouble
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] ARM: dts: am57xx-beagle-x15-common: Fix wrong pinctrl selection for mmc2
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv3] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap dts updates for v4.9 merge window, part 2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] usb: musb: Fix unbalanced platform_disable
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/2] usb: musb: Fix session based PM for first invalid VBUS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] usb: musb: Fix PM runtime for disconnect after unconfigure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Few PM fixes for MUSB for v4.9 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [4.4-RT PATCH RFC/RFT] drivers: net: cpsw: mark rx/tx irq as IRQF_NO_THREAD
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCHv3] usb: musb: Fix unbalanced platform_disable
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] mfd: Fix all W=1 warnings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Vignesh R <vigneshr@xxxxxx>
• v4.8-rc: GSM audio causes trouble
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 0/7] mfd: Fix all W=1 warnings
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 6/7] mfd: omap-usb-host: Return value is not 'const int'
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/7] mfd: ab8500-debugfs: Prevent initialised field from being over-written
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/7] mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 5/7] mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/7] mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/7] mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 6/7] mfd: omap-usb-host: Return value is not 'const int'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 7/7] mfd: cros_ec_spi: Remove unused variable 'request'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/7] mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/7] mfd: ab8500-debugfs: Prevent initialised field from being over-written
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 0/7] mfd: Fix all W=1 warnings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv3 06/11] crypto: omap-des: Fix support for unequal lengths
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 00/11] crypto: omap HW crypto fixes
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH 00/11] pci: support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH] cpufreq: ti: Use generic platdev driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: am33xx/dra7xx: Fix cpufreq regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] cpufreq: ti: Use generic platdev driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/3] Revert "ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver"
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 3/3] Revert "ARM: dts: dra7: Move to operating-points-v2 table"
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 1/3] Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu"
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 0/3] ARM: dts: am33xx/dra7xx: Fix cpufreq regression
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• [PATCH] cpufreq: ti: Use generic platdev driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 4/9] net: ethernet: ti: cpts: move dt props parsing to cpts driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 6/9] net: ethernet: ti: cpts: clean up event list if event pool is empty
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 4/9] net: ethernet: ti: cpts: move dt props parsing to cpts driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] wlcore: sdio: Populate config firmware data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] wlcore: sdio: Populate config firmware data
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] phy-twl4030-usb: better handle musb_mailbox() failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: drivers/usb/musb/tusb6010.c:142:21: error: 'USB_INDEX' undeclared
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 6/9] net: ethernet: ti: cpts: clean up event list if event pool is empty
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 5/9] net: ethernet: ti: cpts: add return value to tx and rx timestamp funcitons
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 4/9] net: ethernet: ti: cpts: move dt props parsing to cpts driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH] dmaengine: cppi41: Ignore EINPROGRESS for PM runtime
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [RFC PATCH 00/11] pci: support for configurable PCI endpoint
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Correct type2 descriptor's member types
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: drivers/usb/musb/tusb6010.c:142:21: error: 'USB_INDEX' undeclared
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 0/9] net: ethernet: ti: cpts: update and fixes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 1/9] net: ethernet: ti: exclude cpts from build when disabled
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/9] net: ethernet: ti: cpsw: minimize direct access to struct cpts
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 5/9] net: ethernet: ti: cpts: add return value to tx and rx timestamp funcitons
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 6/9] net: ethernet: ti: cpts: clean up event list if event pool is empty
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 9/9] net: ethernet: ti: cpts: switch to readl/writel_relaxed()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 4/9] net: ethernet: ti: cpts: move dt props parsing to cpts driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2] mmc: omap: Initialize dma_slave_config to avoid random data in it's fields
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2] mmc: omap: Initialize dma_slave_config to avoid random data in it's fields
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [RFC] Switching 8250_omap to use 8250_dma RX and TX flow
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2] mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] mmc: omap: Initialize dma_slave_config to avoid random data in it's fields
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v4 1/2] ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 2/2] ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 0/2] ARM: cleanup PCI specific configs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] mmc: omap: Initialize dma_slave_config to avoid random data in it's fields
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/3] mfd: tps65217: Add power-button and IRQ support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: tps65217: fix nonstandard declaration
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] mfd: tps65217: fix nonstandard declaration
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] phy-twl4030-usb: better handle musb_mailbox() failure
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2] phy-twl4030-usb: better handle musb_mailbox() failure
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 02/11] pci: endpoint: introduce configfs entry for configuring EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 01/11] pci: endpoint: add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 08/11] pci: controller: dra7xx: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 09/11] misc: add a new host side PCI endpoint test driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 05/11] pci: rename *host* directory to *controller*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 07/11] pci: controller: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 10/11] ARM: dts: DRA7: Modify pcie1 dt node for EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 11/11] HACK: pci: controller: dra7xx: disable smart idle
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 06/11] pci: controller: split designware into *core* and *host*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 03/11] Documentation: PCI: guide to use PCI Endpoint Core Layer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 04/11] pci: endpoint: functions: add an EP function to test PCI
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 00/11] pci: support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH] pci: support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add power button support for igepv5
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: drivers/usb/musb/tusb6010.c:142:21: error: 'USB_INDEX' undeclared
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/21] ARM: OMAP: wakeupgen: Convert to hotplug state machine
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 0/2] ARM: dts: Introduce support for rev BeagleBoard-X15 B1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] wlcore: wl18xx: Use chip specific configuration firmware
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] wlcore: sdio: Populate config firmware data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] wlcore: Fix config firmware loading issues
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] wlcore: sdio: Populate config firmware data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] wlcore: Prepare family to fix nvs file handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/5] Fix wlcore config firwmare annoyances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] dmaengine: cppi41: Ignore EINPROGRESS for PM runtime
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC PATCH] Documentation: PCI: guide to use PCI Endpoint Core Layer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: controller: split designware into *core* and *host*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: rename *host* directory to *controller*
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] ARM: dts: DRA7: Modify pcie1 dt node for EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: controller: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] HACK: pci: controller: dra7xx: disable smart idle
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] misc: add a new host side PCI endpoint test driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: controller: dra7xx: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: endpoint: functions: add an EP function to test PCI
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: endpoint: add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: endpoint: introduce configfs entry for configuring EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH] pci: support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL 2/3] omap dts updates for v4.9 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 00/11] crypto: omap HW crypto fixes
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv3 06/11] crypto: omap-des: Fix support for unequal lengths
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] mfd: twl-core: Make it explicitly non-modular
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dmaengine: omap-dma: Correct type2 descriptor's member types
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 6/6] mfd: twl-core: Make it explicitly non-modular
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request.."
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Bin Liu <b-liu@xxxxxx>
• omap serial(uart) fails in TX after boot (sometimes)
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• [PATCHv2] usb: musb: Fix unbalanced platform_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] phy-twl4030-usb: better handle musb_mailbox() failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: David Rivshin <drivshin@xxxxxxxxx>
• [PATCH 6/6] mfd: twl-core: Make it explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [PATCH v2 0/6] mfd: trivial demodularization of non-modular drivers.
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 2/3] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 1/3] mfd: tps65217: Add support for IRQs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tom Rini <trini@xxxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tom Rini <trini@xxxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tom Rini <trini@xxxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: Regmap regression in next caused by of_iomap change
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Regmap regression in next caused by of_iomap change
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv2] ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Fix LEDs for igepv5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/3] Input: Add support for tps65217 power button
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: L3 error handling (was: Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request..")
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• L3 error handling (was: Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request..")
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request.."
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add support for more than 2GB of memory for omap5
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request.."
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request.."
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [4.8.0-rc1] am335x-evm boot failure: n_tty_receive_buf_common: "Unable to handle kernel paging request.."
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: 4.8 crash on BeagleBone
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Add power button support for igepv5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Add support for more than 2GB of memory for omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Configure omap5 OTG ID pin
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Configure panda SDIO WLAN wakeirq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [08/15] usb: musb: Improve PM runtime and phy handling for 2430 glue layer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [08/15] usb: musb: Improve PM runtime and phy handling for 2430 glue layer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [v2] musb: omap2430: do not assume balanced enable()/disable()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [08/15] usb: musb: Improve PM runtime and phy handling for 2430 glue layer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [08/15] usb: musb: Improve PM runtime and phy handling for 2430 glue layer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [08/15] usb: musb: Improve PM runtime and phy handling for 2430 glue layer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [08/15] usb: musb: Improve PM runtime and phy handling for 2430 glue layer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tom Rini <trini@xxxxxxxxxxxx>
• Re: [4.4-RT PATCH RFC/RFT] drivers: net: cpsw: mark rx/tx irq as IRQF_NO_THREAD
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v6 3/3] Input: Add support for tps65217 power button
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v6 2/3] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v6 1/3] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v6 0/3] mfd: tps65217: Add power-button and IRQ support
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v5 3/3] Input: Add support for tps65217 power button
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] mfd: tps65217: Add power button as subdevice
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 1/3] mfd: tps65217: Add support for IRQs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Regmap regression in next caused by of_iomap change
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Regmap regression in next caused by of_iomap change
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] Input: Add support for tps65217 power button
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [4.4-RT PATCH RFC/RFT] drivers: net: cpsw: mark rx/tx irq as IRQF_NO_THREAD
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [4.4-RT PATCH RFC/RFT] drivers: net: cpsw: mark rx/tx irq as IRQF_NO_THREAD
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Kexec regression in next-20160906
  • From: Thiago Jung Bauermann <bauerman@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [4.4-RT PATCH RFC/RFT] drivers: net: cpsw: mark rx/tx irq as IRQF_NO_THREAD
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v5] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v5 3/3] Input: Add support for tps65217 power button
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v5 1/3] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v5 0/3] mfd: tps65217: Add power-button and IRQ support
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH v5 2/3] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] Documentation: dt: add bindings for ti-cpufreq
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• OMAP3 NAND bad block tables
  • From: David Winn <dwinn@xxxxxxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• OMAP3 NAND bad block tables
  • From: David Winn <dwinn@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v4 3/3] Input: Add tps65217 power button driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 2/2] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v2 1/2] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v4 3/3] Input: Add tps65217 power button driver
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: Kexec regression in next-20160906
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] Documentation: dt: add bindings for ti-cpufreq
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: Kexec regression in next-20160906
  • From: Thiago Jung Bauermann <bauerman@xxxxxxxxxxxxxxxxxx>
• Kexec regression in next-20160906
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/21] ARM: OMAP: wakeupgen: Convert to hotplug state machine
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] pwm: pwm-tipwmss: Remove all pm_runtime gets and puts from the driver
  • From: "R, Vignesh" <vigneshr@xxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v3 0/2] AM335x-ICE: Add support for rotary switch
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] pwm: pwm-tipwmss: Remove all pm_runtime gets and puts from the driver
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] pwm: twl: Reliably disable TWL6030 PWMs
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [RESEND PATCH v4 3/3] Input: Add tps65217 power button driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [RFC] ARM: OMAP3: Add device tree and pdata hooks to enable SGX on OMAP3
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [RFC] ARM: OMAP3: Add device tree and pdata hooks to enable SGX on OMAP3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] ARM: OMAP3: Add device tree and pdata hooks to enable SGX on OMAP3
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [RFC] ARM: OMAP3: Add device tree and pdata hooks to enable SGX on OMAP3
  • From: aford173@xxxxxxxxx
• [PATCH V2 1/2] ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 0/2] ARM: dts: Introduce support for rev BeagleBoard-X15 B1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [GIT PULL 1/3] omap soc updates for v4.9 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 1/3] omap soc updates for v4.9 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] drop last omap3 board files for v4.8
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap-gpmc changes for v4.9 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [GIT PULL 3/3] omap defconfig updates for v4.9 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RESEND PATCH v4 0/3] mfd: tps65217: Add power-button and IRQ support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3 Reset Controller Question
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/4] usb: musb: Prepare dsps glue layer for PM runtime support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Implement session bit based runtime PM for musb-core
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] drop last omap3 board files for v4.8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am57xx-beagle-x15: Remove pinmux configurations
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/4] usb: musb: Prepare dsps glue layer for PM runtime support
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [GIT PULL] drop last omap3 board files for v4.8
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Implement session bit based runtime PM for musb-core
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 0/4] Implement PM runtime for musb-core based on session bit
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: [PATCH 0/3] phy: omap-usb2: Fixes for v4.9
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [RESEND PATCH v4 3/3] Input: Add tps65217 power button driver
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v4 2/3] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v4 1/3] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v4 0/3] mfd: tps65217: Add power-button and IRQ support
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am57xx-beagle-x15: Remove pinmux configurations
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/2] ARM: dts: Introduce support for rev BeagleBoard-X15 B1
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] ARM: dts: am57xx-beagle-x15: Remove pinmux configurations
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] ARM: dts: Introduce support for rev BeagleBoard-X15 B1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: OMAP3 Reset Controller Question
  • From: Tero Kristo <t-kristo@xxxxxx>
• OMAP3 Reset Controller Question
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: OMAP35XX SGX Driver and hwmod
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v4] rtc: omap: Support ext_wakeup configuration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [GIT PULL 3/3] omap defconfig updates for v4.9 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/3] omap dts updates for v4.9 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/3] omap soc updates for v4.9 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] drop last omap3 board files for v4.8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15: fix HDMI LS_OE GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15: fix HDMI LS_OE GPIO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15: fix HDMI LS_OE GPIO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15: fix HDMI LS_OE GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15: fix HDMI LS_OE GPIO
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15: fix HDMI LS_OE GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: am57xx-beagle-x15: fix HDMI LS_OE GPIO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: Applied "regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/23] ARM: dts: omap: Remove skeleton.dtsi usage and fix memory node DTC warning"
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-pcm: off-by-one in 'omap_pcm_limit_supported_formats'
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] ASoC: omap-pcm: off-by-one in 'omap_pcm_limit_supported_formats'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 1/2] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 0/2] cpufreq: Introduce TI CPUFreq/OPP Driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 1/3] ARM: dts: am33xx: Change operating-points-v2 table to am3352 version
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 2/3] ARM: dts: am4372: Change operating-points-v2 table to am4372 version
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 3/3] ARM: dts: dra7: Change operating-points-v2 table to dra7 version
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 0/3] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 0/8] ARM: dts: Add operating-points-v2 tables for TI platforms
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH v3 0/8] drm/tilcdc: Address LCDC rev 2 color errata + other fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] drm/tilcdc: Address LCDC rev 2 color errata + other fixes
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v3 0/8] drm/tilcdc: Address LCDC rev 2 color errata + other fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/23] ARM: dts: omap: Remove skeleton.dtsi usage and fix memory node DTC warning"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] ARM: dts: dra7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: cppi41: Add basic PM runtime support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Applied "regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] ARM: dts: dra7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH RESEND 2/2] mfd: twl6040: Register child device for twl6040-pdmclk
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RESEND 1/2] mfd: twl6040: The chip does not support bulk access
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RESEND 2/2] mfd: twl6040: Register child device for twl6040-pdmclk
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: cppi41: Add basic PM runtime support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 00/23] ARM: dts: omap: Remove skeleton.dtsi usage and fix memory node DTC warning"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/23] ARM: am335x: Add missing memory node in sl50 board
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v2 0/3] drm/i2c: tda998x ASoC hdmi-codec support + BeagleBoneBlack audio support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, GPIO and Regulator due for the v4.9 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v9 1/3] mfd: lp873x: Add lp873x PMIC support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH RESEND 1/2] mfd: twl6040: The chip does not support bulk access
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH RESEND 2/2] mfd: twl6040: Register child device for twl6040-pdmclk
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH RESEND 0/2] mfd: twl6040: bulk access fix and pdmclk registration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 1/3] mfd: lp873x: Add lp873x PMIC support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 0/5] The series cleans up mainly the regulator driver and implements
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 02/23] ARM: omap3: Add missing memory node in overo and torpedo boards
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 03/23] ARM: dts: omap2: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 05/23] ARM: dts: omap4: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 04/23] ARM: dts: omap3: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 07/23] ARM: dts: am33xx: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 08/23] ARM: dts: dm814x: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 09/23] ARM: dts: dm816x: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 11/23] ARM: dts: am4372: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 13/23] ARM: dts: omap3: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 12/23] ARM: dts: omap2: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 14/23] ARM: dts: omap4: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 15/23] ARM: dts: omap5: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 19/23] ARM: dts: am572x: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 21/23] ARM: dts: dm8168: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 18/23] ARM: dts: am4372: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 22/23] ARM: dts: dra62x: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 16/23] ARM: dts: am335x: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 23/23] ARM: dts: dra7: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 20/23] ARM: dts: dm8148: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 17/23] ARM: dts: am3517: Add missing unit name to memory nodes
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 10/23] ARM: dts: dra7: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 06/23] ARM: dts: omap5: Remove skeleton.dtsi usage
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 01/23] ARM: am335x: Add missing memory node in sl50 board
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 00/23] ARM: dts: omap: Remove skeleton.dtsi usage and fix memory node DTC warning"
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v9 3/3] regulator: lp873x: Change the MFD config option as per latest naming
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v9 2/3] gpio: lp873x: Add support for General Purpose Outputs
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v9 1/3] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v9 0/3] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: dra7: cpsw: fix clocks tree
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 1/3] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v8 1/3] mfd: lp873x: Add lp873x PMIC support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] ARM: dts: dra7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] dmaengine: cppi41: Prepare to add PM runtime support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: cppi41: Add basic PM runtime support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v4] rtc: omap: Support ext_wakeup configuration
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] ARM: dts: dra7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RESEND PATCH 1/2] ARM: dts: dra7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] ARM: dts: dra7: cpsw: fix clocks tree
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 0/4] ARM: dts: TPS65218: Clean ups
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] mfd: tps65217: Add support for IRQs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Support for configurable PCIe endpoint
  • From: Roy Zang <roy.zang@xxxxxxx>
• Re: [PATCH] pwm: pwm-tipwmss: Remove all pm_runtime gets and puts from the driver
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCHv2] of: Add generic handling for ePAPR 1.1 fail-sss states
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add LogicPD DM37/AM37 Torpedo and SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 03/11] crypto: omap-sham: implement context export/import APIs
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: Support for configurable PCIe endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 5/5] Input: Add tps65217 power button driver
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [GIT PULL] omap-gpmc changes for v4.9 merge window
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] fix:memory:omap-gpmc:mark symbols static where possible
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC 1/1] drivers: i2c: omap: Add slave support
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• RE: [PATCH] omapdrm: dss: drop unneeded of_node_put() on ref passed to of_get_next_parent()
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [RFC 1/1] drivers: i2c: omap: Add slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] fix:memory:omap-gpmc:mark symbols static where possible
  • From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
• [PATCH] ARM: dts: Add LogicPD DM37/AM37 Torpedo and SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC 1/1] drivers: i2c: omap: Add slave support
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [RFC 1/1] drivers: i2c: omap: Add slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 1/1] drivers: i2c: omap: Add slave support
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH] USB: ohci-omap - avoid including mach/irqs.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] omapdrm: dss: drop unneeded of_node_put() on ref passed to of_get_next_parent()
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH] omapdrm: dss: drop unneeded of_node_put() on ref passed to of_get_next_parent()
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH -next] net: ethernet: ti: cpsw: fix error return code in cpsw_set_channels()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Bunch of CRC errors in next with arm: move exports to definitions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: Bunch of CRC errors in next with arm: move exports to definitions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: Bunch of CRC errors in next with arm: move exports to definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bunch of CRC errors in next with arm: move exports to definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] USB: ohci-omap - avoid including mach/irqs.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ohci-omap - avoid including mach/irqs.h
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ohci-omap - avoid including mach/irqs.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: dts: TPS65218: Clean ups
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-wega: Add audio support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: dra7: workaround silicon limitation i845
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-idk-common: Enable support for QSPI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7xx: Increase spi-max-frequency to 76.8MHz for QSPI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH -next] net: ethernet: ti: cpsw: fix error return code in cpsw_set_channels()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH 0/4] ARM: dts: TPS65218: Clean ups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH 0/3] ARM: dts: Enable suspend configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] rtc: omap: Support ext_wakeup configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omapdrm: dss: drop unneeded of_node_put() on ref passed to of_get_next_parent()
  • From: Andrey Utkin <andrey_utkin@xxxxxxxxxxxx>
• Re: [PATCH] mtd: nand: Allow MTD_NAND_OMAP2 to be usable on Keystone devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap fixes for v4.8-rc cycle
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] omap-gpmc fixes for v4.8-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v3 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [RFC 1/1] drivers: i2c: omap: Add slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Support for configurable PCIe endpoint
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v4] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: OMAP35XX SGX Driver and hwmod
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: omap5-board-common: enable rtc and charging of backup battery
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• [PATCH v2] phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2] phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/9] PCI: final demodularization of non-modular code
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 0/9] PCI: final demodularization of non-modular code
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [PATCH 4/9] PCI: dra7xx: make host code explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix locking errors for host only mode
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP35XX SGX Driver and hwmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Applied "ASoC: omap-abe-twl6040: Use devm_snd_soc_register_card()" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 0/2] AM335x-ICE: Add support for rotary switch
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• [PATCH] mtd: nand: Allow MTD_NAND_OMAP2 to be usable on Keystone devices
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] memory: omap-gpmc: Fix build with CONFIG_OMAP_GPMC disabled
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 0/2] AM335x-ICE: Add support for rotary switch
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v3 0/2] AM335x-ICE: Add support for rotary switch
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [GIT PULL] omap-gpmc fixes for v4.8-rc1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 2/2] ARM: dts: am335x-icev2: Add nodes for gpio-decoder
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 0/2] AM335x-ICE: Add support for rotary switch
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH -next] ASoC: omap-abe-twl6040: Use devm_snd_soc_register_card()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Q: using DMA with OMAP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH -next] ASoC: omap-abe-twl6040: Use devm_snd_soc_register_card()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH] phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] phy-twl4030-usb: better handle musb_mailbox() failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: phy: ti: add documentation for ti,dra7x-usb2
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: OMAP35XX SGX Driver and hwmod
  • From: Suman Anna <s-anna@xxxxxx>
• Re: OMAP35XX SGX Driver and hwmod
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: Q: using DMA with OMAP
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• [PATCH 0/3] phy: omap-usb2: Fixes for v4.9
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/3] phy: omap-usb2: support suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/3] dt-bindings: phy: ti: add documentation for ti,dra7x-usb2
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/3] ARM: dts: dra7: workaround silicon limitation i845
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: omap2-mcspi, invalid SPI data received
  • From: Jonatan Magnusson <jonatan.magnusson@xxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v4 0/5] net: ethernet: ti: cpsw: add cpdma multi-queue support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v2 2/2] ARM: dts: am335x-icev2: Add nodes for gpio-decoder
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 0/2] AM335x-ICE: Add support for rotary switch
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v4 5/5] net: ethernet: ti: cpsw: add ethtool channels support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v4 3/5] net: ethernet: ti: cpsw: add multi queue support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v4 1/5] net: ethernet: ti: davinci_cpdma: split descs num between all channels
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v7 0/3] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <a0393675@xxxxxx>
• Re: [RESEND PATCH 0/3] ARM: dts: Enable suspend configuration
  • From: Keerthy <a0393675@xxxxxx>
• [PATCH] phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2] phy-twl4030-usb: better handle musb_mailbox() failure
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v4 0/5] net: ethernet: ti: cpsw: add cpdma multi-queue support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v4 1/5] net: ethernet: ti: davinci_cpdma: split descs num between all channels
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v4 4/5] net: ethernet: ti: davinci_cpdma: move cpdma channel struct macroses to internals
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v4 3/5] net: ethernet: ti: cpsw: add multi queue support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v4 5/5] net: ethernet: ti: cpsw: add ethtool channels support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v4 2/5] net: ethernet: ti: davinci_cpdma: fix locking while ctrl_stop
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: cppi41: Add basic PM runtime support
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Bunch of CRC errors in next with arm: move exports to definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] phy-twl4030-usb: better handle musb_mailbox() failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] USB: ohci-omap - avoid including mach/irqs.h
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Implement PM runtime for musb-core based on session bit
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: cppi41: Add basic PM runtime support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH v4 5/5] Input: Add tps65217 power button driver
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/5] mfd: tps65217: Add power button as subdevice
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: Q: using DMA with OMAP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: 4.8 crash on BeagleBone
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>