On Thu, Sep 08, 2016 at 12:52:03PM +0200, Marcin Niestroj wrote: > Support configuration of ext_wakeup sources. This patch makes it > possible to enable ext_wakeup and set it's polarity, depending on board > configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to > notify about power-button presses. Handling power-button presses enables > to recover from RTC-only power states correctly. > > Signed-off-by: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx> > --- > Hi, > > This patch adds support for ext_wakeup using generic pinconf device-tree > bindings, with one added custom property. > > Changes v4 -> v5 (suggested by Rob): > * Don't use GPIO defines in ti,input-polarity, use optional ti,active-high > boolean instead. > * Use '-' instead of '_' in node name. > > Changes v1 -> v4: > * This is a total reimplementation, so it is not based on any of the previous > patch versions. This approach has been suggested by Tony and Grygorii > in [1]. > > Patch was developed on 4.7, rebased on 4.8-rc5, tested using chiliBoard. > > [1] http://www.spinics.net/lists/devicetree/msg131516.html > > Documentation/devicetree/bindings/rtc/rtc-omap.txt | 21 +++ For the binding: Acked-by: Rob Herring <robh@xxxxxxxxxx> > drivers/rtc/Kconfig | 1 + > drivers/rtc/rtc-omap.c | 168 ++++++++++++++++++++- > 3 files changed, 182 insertions(+), 8 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
