Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v5 net-next 05/10] net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 07/10] net: dsa: felix: restore multicast flood to CPU when NPI tagger reinitializes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 08/10] net: mscc: ocelot: use separate flooding PGID for broadcast
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 06/10] net: dsa: act as passthrough for bridge port flags
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 04/10] net: dsa: configure better brport flags when ports leave the bridge
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 03/10] net: bridge: don't print in br_switchdev_set_port_flag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 02/10] net: bridge: offload all port flags at once in br_setport
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 01/10] net: switchdev: propagate extack to port attributes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v5 net-next 00/10] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v4 net-next 0/9] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v4 net-next 0/9] Cleanup in brport flags switchdev offload for DSA
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v4 net-next 0/9] Cleanup in brport flags switchdev offload for DSA
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v4 net-next 7/9] net: mscc: ocelot: use separate flooding PGID for broadcast
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH] mmc: omap-hsmmc: Simplify bool comparison
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] video: use getter/setter functions
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 net-next 6/9] net: dsa: act as ass passthrough for bridge port flags
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-pocketbeagle: unique gpio-line-names
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 net-next 1/9] net: switchdev: propagate extack to port attributes
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v4 net-next 9/9] net: dsa: sja1105: offload bridge port flags to device
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 8/9] net: mscc: ocelot: offload bridge port flags to device
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 7/9] net: mscc: ocelot: use separate flooding PGID for broadcast
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 6/9] net: dsa: act as ass passthrough for bridge port flags
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 5/9] net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 4/9] net: dsa: configure better brport flags when ports leave the bridge
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 3/9] net: bridge: don't print in br_switchdev_set_port_flag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 2/9] net: bridge: offload all port flags at once in br_setport
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 1/9] net: switchdev: propagate extack to port attributes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 net-next 0/9] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 10/21] clk: ti: dpll44xx: Fix some potential doc-rot
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 03/21] clk: ti: dpll3xxx: Fix some kernel-doc headers and promote other worthy ones
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 02/21] clk: ti: clkt_dpll: Fix some kernel-doc misdemeanours
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 16/20] clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 15/20] clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 13/20] clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v4 24/80] drm/omap: dsi: move TE GPIO handling into core
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] video: use getter/setter functions
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH 3/5] drm/omap: hdmi4: simplify CEC Phys Addr handling
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH 4/5] drm/omap: hdmi5: add CEC support
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH 2/5] drm/omap: hdmi4: switch to the cec bridge ops
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH 5/5] ARM: dts: dra7/omap5: add cec clock
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH 0/5] drm/omap: hdmi: improve hdmi4 CEC, add CEC for hdmi5
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH 1/5] drm: drm_bridge: add cec_init/exit bridge ops
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v4 24/80] drm/omap: dsi: move TE GPIO handling into core
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 net-next 10/11] net: mscc: ocelot: offload bridge port flags to device
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 net-next 09/11] net: mscc: ocelot: use separate flooding PGID for broadcast
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 net-next 06/11] net: dsa: kill .port_egress_floods overengineering
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 net-next 04/11] net: dsa: configure proper brport flags when ports leave the bridge
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 net-next 01/11] net: switchdev: propagate extack to port attributes
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 net-next 07/11] net: prep switchdev drivers for concurrent SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: mailbox: omap: Update binding for AM64x SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RESEND v6 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v6 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH RESEND v6 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] video: use getter/setter functions
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] video: use getter/setter functions
  • From: Julia Lawall <julia.lawall@xxxxxxxx>
• Re: [PATCH] video: use getter/setter functions
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: [PATCH v3 net-next 07/11] net: prep switchdev drivers for concurrent SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v3 net-next 08/11] net: bridge: put SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS on the blocking call chain
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: [PATCH v3 net-next 07/11] net: prep switchdev drivers for concurrent SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• [PATCH v3 net-next 11/11] net: dsa: sja1105: offload bridge port flags to device
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 10/11] net: mscc: ocelot: offload bridge port flags to device
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 09/11] net: mscc: ocelot: use separate flooding PGID for broadcast
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 07/11] net: prep switchdev drivers for concurrent SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 08/11] net: bridge: put SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS on the blocking call chain
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 06/11] net: dsa: kill .port_egress_floods overengineering
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 05/11] net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 03/11] net: bridge: don't print in br_switchdev_set_port_flag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 04/11] net: dsa: configure proper brport flags when ports leave the bridge
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 02/11] net: bridge: offload all port flags at once in br_setport
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 01/11] net: switchdev: propagate extack to port attributes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] video: use getter/setter functions
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] Documentation: Replace lkml.org links with lore
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] Documentation: Replace lkml.org links with lore
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [next] [arm] ERROR: modpost: "udp_sock_create6" [net/rxrpc/rxrpc.ko] undefined!
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 net-next 07/11] net: dsa: kill .port_egress_floods overengineering
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• [PATCH] video: use getter/setter functions
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mailbox: omap: Update binding for AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 net-next 07/11] net: dsa: kill .port_egress_floods overengineering
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 0/2] Add Mailbox support for TI K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 2/2] mailbox: omap: Add support for K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 1/2] dt-bindings: mailbox: omap: Update binding for AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: mailbox: omap: Update binding for AM64x SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v2 net-next 02/11] net: bridge: offload all port flags at once in br_setport
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 net-next 02/11] net: bridge: offload all port flags at once in br_setport
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 net-next 03/11] net: bridge: don't print in br_switchdev_set_port_flag
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v2 net-next 01/11] net: switchdev: propagate extack to port attributes
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: irqchip: Add node name to PRUSS INTC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 net-next 03/11] net: bridge: don't print in br_switchdev_set_port_flag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 1/2] dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 2/2] hwspinlock: omap: Add support for K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 0/2] Add HwSpinlock support for TI K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 net-next 11/11] net: dsa: sja1105: offload bridge port flags to device
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 09/11] net: mscc: ocelot: use separate flooding PGID for broadcast
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 10/11] net: mscc: ocelot: offload bridge port flags to device
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 08/11] net: bridge: put SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS on the blocking call chain
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 07/11] net: dsa: kill .port_egress_floods overengineering
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 06/11] net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 05/11] net: dsa: stop setting initial and final brport flags
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 00/11] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 03/11] net: bridge: don't print in br_switchdev_set_port_flag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 02/11] net: bridge: offload all port flags at once in br_setport
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 net-next 01/11] net: switchdev: propagate extack to port attributes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH 3/3] video: fbdev: amba-clcd: Always use msleep() for waiting
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3] video: omapfb: Remove WARN_ON(in_interrupt()).
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/3] video: omap: Remove in_interrupt() usage.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 0/3] video: Remove in_interrupt() usage.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v7 2/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• [PATCH AUTOSEL 5.4 03/19] ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 05/36] ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4 24/80] drm/omap: dsi: move TE GPIO handling into core
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: DM3730 Suspend-Resume with 5.11-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH net-next 5/9] net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS
  • From: Ioana Ciornei <ioana.ciornei@xxxxxxx>
• [PATCH v5 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net-next 2/9] net: bridge: offload initial and final port flags through switchdev
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: [PATCH 0/9] drivers: mmc: Update trivial tasklet_init() callers
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH net-next 2/9] net: bridge: offload initial and final port flags through switchdev
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH net-next 2/9] net: bridge: offload initial and final port flags through switchdev
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: DM3730 Suspend-Resume with 5.11-rc6
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] mmc: omap-hsmmc: Simplify bool comparison
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• Re: DM3730 Suspend-Resume with 5.11-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Tero Kristo <kristo@xxxxxxxxxx>
• Re: [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH net-next 9/9] net: mscc: ocelot: support multiple bridges
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 8/9] net: mscc: ocelot: offload bridge port flags to device
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 7/9] net: mscc: ocelot: use separate flooding PGID for broadcast
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 6/9] net: bridge: stop treating EOPNOTSUPP as special in br_switchdev_set_port_flag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 5/9] net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 4/9] net: dsa: kill .port_egress_floods overengineering
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 3/9] net: dsa: stop setting initial and final brport flags
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 0/9] Cleanup in brport flags switchdev offload for DSA
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 2/9] net: bridge: offload initial and final port flags through switchdev
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH net-next 1/9] net: bridge: don't print in br_switchdev_set_port_flag
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Add AT25 EEPROM module
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: DM3730 Suspend-Resume with 5.11-rc6
  • From: Adam Ford <aford173@xxxxxxxxx>
• DM3730 Suspend-Resume with 5.11-rc6
  • From: Adam Ford <aford173@xxxxxxxxx>
• Droid 4 charging
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/4] thermal: ti-soc-thermal: Simplify polling with iopoll
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 4/4] thermal: ti-soc-thermal: Use non-inverted define for omap4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap2plus_defconfig: Enable Netfilter components as modules.
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 4/4] thermal: ti-soc-thermal: Use non-inverted define for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] thermal: ti-soc-thermal: Simplify polling with iopoll
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap2plus_defconfig: Enable Netfilter components as modules.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] thermal: ti-soc-thermal: Skip pointless register access for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/4] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/4] Thermal fixes for omaps for single mode read
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap2plus_defconfig: Enable Netfilter components as modules.
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: "Ivan J." <parazyd@xxxxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 01/13] doc: bindings: pci: designware-pcie.txt: convert it to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH V2] cpufreq: Remove CPUFREQ_STICKY flag
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 01/13] doc: bindings: pci: designware-pcie.txt: convert it to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/9] mmc: dw_mmc: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 4/9] mmc: omap: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• Re: [PATCH v2 01/11] doc: bindings: PCI: designware-pcie.txt: convert it to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 8/9] mmc: via-sdmmc: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 9/9] mmc: wbsd: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 7/9] mmc: uniphier-sd: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 5/9] mmc: s3cmci: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 6/9] mmc: tifm_sd: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 2/9] mmc: au1xmmc: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 0/9] drivers: mmc: Update trivial tasklet_init() callers
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 1/9] mmc: atmel-mci: Use new tasklet API
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-pocketbeagle: unique gpio-line-names
  • From: Drew Fustini <drew@xxxxxxxxxxxxxxx>
• Re: [PATCH] bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-pocketbeagle: unique gpio-line-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] Defconfig changes for omaps for v5.12
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33xx: add aliases for mmc interfaces
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options.
  • From: Ivan Jelincic <parazyd@xxxxxxxx>
• [PATCH 1/2] ARM: omap2plus_defconfig: Enable Netfilter components as modules.
  • From: Ivan Jelincic <parazyd@xxxxxxxx>
• Re: [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 01/11] doc: bindings: PCI: designware-pcie.txt: convert it to YAML
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 00/11] Add support for Hikey 970 PCIe
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 01/13] doc: bindings: pci: designware-pcie.txt: convert it to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 01/13] doc: bindings: pci: designware-pcie.txt: convert it to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 00/13] Add support for Hikey 970 PCIe
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 00/13] Add support for Hikey 970 PCIe
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 01/13] doc: bindings: pci: designware-pcie.txt: convert it to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• RE: [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2
  • From: Tom Joseph <tjoseph@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: remove unneeded semicolon
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• [PATCH V2] cpufreq: Remove CPUFREQ_STICKY flag
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] arm: omap2: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] cpufreq: Remove CPUFREQ_STICKY flag
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] cpufreq: Remove CPUFREQ_STICKY flag
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] cpufreq: Remove CPUFREQ_STICKY flag
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-boneblack.dts: unique gpio-line-names
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-pocketbeagle: unique gpio-line-names
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH] cpufreq: Remove CPUFREQ_STICKY flag
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: omap3-echo: Update LED configuration
  • From: André Hentschel <nerv@xxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: omap3-echo: Add ath6kl node
  • From: André Hentschel <nerv@xxxxxxxxxxx>
• Re: [PATCH] remoteproc/wkup_m3: Drop legacy platform data no longer needed
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH] ARM: dts: am33xx: add aliases for mmc interfaces
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [GIT PULL 2/2] Devicetree changes for omaps for v5.12
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] SoC changes for omaps for v5.12
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-boneblack.dts: unique gpio-line-names
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-pocketbeagle: unique gpio-line-names
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/15] PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] remoteproc/wkup_m3: Drop legacy platform data no longer needed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] Fixes for omaps for v5.11-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Add Mailbox support for TI K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/2] mailbox: omap: Add support for K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/2] dt-bindings: mailbox: omap: Update binding for AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/2] video: omapfb: Remove WARN_ON(in_interrupt()).
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/2] video: omap: Remove in_interrupt() usage.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 0/2] video: omap*: Remove in_interrupt() usage.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt: pci: designware-pcie.txt: convert it to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v2 0/6] Stop NULLifying match pointer in of_match_device()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: am335x-boneblack.dts: unique gpio-line-names
  • From: Drew Fustini <drew@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: am335x-pocketbeagle: unique gpio-line-names
  • From: Drew Fustini <drew@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: irqchip: Add #address-cells to PRUSS INTC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 21/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 27/27] ARM: OMAP2+: Drop legacy platform data for dra7 hwmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/27] ARM: dts: Configure simple-pm-bus for dra7 l3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/27] ARM: dts: Configure simple-pm-bus for dra7 l4_per3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 18/27] ARM: OMAP2+: Drop legacy platform data for dra7 sata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/27] ARM: dts: Configure interconnect target module for dra7 dmm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/27] ARM: dts: Configure simple-pm-bus for dra7 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/27] ARM: dts: Move dra7 l3 noc to a separate node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/27] ARM: dts: Configure simple-pm-bus for dra7 l4_per1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/27] ARM: dts: Configure interconnect target module for dra7 qspi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/27] ARM: dts: Configure interconnect target module for dra7 mpu
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/27] ARM: dts: Configure simple-pm-bus for dra7 l4_per2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/27] ARM: dts: Configure interconnect target module for dra7 pcie
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/27] ARM: dts: Update pcie ranges for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/27] PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] Few ti-sysc changes for v5.12 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] bus: ti-sysc: Detect more modules for debugging
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH RFC 0/2] Convert designware-pcie and kirin-pcie to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH] dt-bindings: irqchip: Add node name to PRUSS INTC
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 24/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 22/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 23/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 25/27] ARM: OMAP2+: Drop legacy platform data for dra7 l4_cfg
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/27] ARM: OMAP2+: Drop legacy platform data for dra7 pcie
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/27] ARM: OMAP2+: Drop legacy platform data for dra7 qspi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 19/27] ARM: OMAP2+: Drop legacy platform data for dra7 mpu
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/27] ARM: dts: Configure simple-pm-bus for dra7 l4_cfg
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/27] ARM: dts: Configure interconnect target module for dra7 sata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/27] ARM: dts: Properly configure dra7 edma sysconfig registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/27] Update dra7 to probe with genpd to drop legacy pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH RFC 1/2] dt: pci: designware-pcie.txt: convert it to yaml
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: irqchip: Add #address-cells to PRUSS INTC
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH RFC 1/2] dt: pci: designware-pcie.txt: convert it to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 03/21] clk: ti: dpll3xxx: Fix some kernel-doc headers and promote other worthy ones
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 02/21] clk: ti: clkt_dpll: Fix some kernel-doc misdemeanours
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 2/6] drivers: net: davinci_mdio: Use of_device_get_match_data()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 02/12] ARM: OMAP2+: Drop legacy platform data for dra7 qspi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 00/12] Drop legacy platform data for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/12] ARM: OMAP2+: Drop legacy platform data for dra7 sata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/12] ARM: OMAP2+: Drop legacy platform data for dra7 l3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/12] ARM: OMAP2+: Drop legacy platform data for dra7 dmm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/12] ARM: OMAP2+: Drop legacy platform data for dra7 hwmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_cfg
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/12] ARM: OMAP2+: Drop legacy platform data for dra7 l4_per2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/12] ARM: OMAP2+: Drop legacy platform data for dra7 pcie
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/12] ARM: OMAP2+: Drop legacy platform data for dra7 mpu
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/21] clk: ti: dpll44xx: Fix some potential doc-rot
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 00/21] [Set 2] Rid W=1 warnings from Clock
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt: pci: designware-pcie.txt: convert it to yaml
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 06/15] ARM: dts: Configure interconnect target module for dra7 qspi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/15] ARM: dts: Move dra7 l3 noc to a separate node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/15] ARM: dts: Configure interconnect target module for dra7 sata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/15] ARM: dts: Configure interconnect target module for dra7 mpu
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/15] ARM: dts: Configure simple-pm-bus for dra7 l4_per2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/15] ARM: dts: Configure simple-pm-bus for dra7 l3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/15] ARM: dts: Configure simple-pm-bus for dra7 l4_per1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/15] ARM: dts: Configure simple-pm-bus for dra7 l4_per3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/15] ARM: dts: Configure simple-pm-bus for dra7 l4_cfg
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/15] ARM: dts: Configure interconnect target module for dra7 dmm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/15] ARM: dts: Configure simple-pm-bus for dra7 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/15] ARM: dts: Properly configure dra7 edma sysconfig registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/15] ARM: dts: Update pcie ranges for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/15] ARM: dts: Configure interconnect target module for dra7 pcie
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/15] PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 00/15] Update dra7 devicetree files to probe with genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: omap2plus_defconfig: Update for dropped options
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: omap2plus_defconfig: Update for moved options
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-igep: Change email address in copyright notice
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm/mach-omap2: fix spellint typo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update address for OMAP GPMC driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2] ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/1] ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-echo: Add speaker sound card support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 20/27] ARM: OMAP2+: Drop legacy platform data for dra7 dmm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 26/27] ARM: OMAP2+: Drop legacy platform data for dra7 l3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] bus: ti-sysc: Fix initializing module_pa for modules without sysc register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: irqchip: Add #address-cells to PRUSS INTC
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH] ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited board
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: [PATCH] dt-bindings: irqchip: Add #address-cells to PRUSS INTC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/2] Add HwSpinlock support for TI K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/2] hwspinlock: omap: Add support for K3 AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/2] dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: (subset) [PATCH 00/20] Rid W=1 warnings from Clock
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH] soc: ti: pruss: Refactor the CFG sub-module init
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [External] : Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxxxxxx>
• Re: [PATCHv2 ] wlcore: Fix command execute failure 19 for wl12xx
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: "santosh.shilimkar@xxxxxxxxxx" <santosh.shilimkar@xxxxxxxxxx>
• [PATCH v2 2/6] drivers: net: davinci_mdio: Use of_device_get_match_data()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v2 0/6] Stop NULLifying match pointer in of_match_device()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• RE: [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2
  • From: Athani Nadeem Ladkhan <nadeem@xxxxxxxxxxx>
• Re: [PATCH 15/20] clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
  • From: Tero Kristo <kristo@xxxxxxxxxx>
• Re: [PATCH 16/20] clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
  • From: Tero Kristo <kristo@xxxxxxxxxx>
• Re: [PATCH 13/20] clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
  • From: Tero Kristo <kristo@xxxxxxxxxx>
• [PATCH 16/20] clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 15/20] clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 13/20] clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 00/20] Rid W=1 warnings from Clock
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] host: omap_hsmmc: style: Simplify bool comparison and conversion
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCHv2] drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCHv2] drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include
  • From: santosh.shilimkar@xxxxxxxxxx
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCHv2] drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH] ARM: dts: omap3-igep: Change email address in copyright notice
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCHv2] drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [am33xx-clocks.dtsi] move ieee5000 ti,gate-clock to a ti,clkctrl?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drivers: bus: simple-pm-bus: Fix compability with simple-bus for auxdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] drivers: power_supply: cpcap-battery: Add battery type auto detection for mapphone devices
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 5/5] power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 4/5] power: supply: cpcap-charger: fix small mistake in current to register conversion
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 3/5] power: supply: cpcap-battery: invalidate empty->counter_uah and charge_full when they are grossly wrong
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 2/5] ARM: dts: add battery phandle to cpcap_charger
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 1/5] power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH v4 1/1] power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2
  • From: Drew Fustini <drew@xxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: irqchip: Add #address-cells to PRUSS INTC
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v4 2/2] ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2
  • From: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] remoteproc: pru: Fix loading of GNU Binutils ELF
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drivers: bus: simple-pm-bus: Fix compability with simple-bus for auxdata
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] host: omap_hsmmc: style: Simplify bool comparison and conversion
  • From: Yang Li <abaci-bugfix@xxxxxxxxxxxxxxxxx>
• [PATCH] drivers: bus: simple-pm-bus: Fix compability with simple-bus for auxdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-battery: constify psy_desc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 ] wlcore: Fix command execute failure 19 for wl12xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-battery: constify psy_desc
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 00/15] Updates for cpcap charger and battery
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [PATCH] power: supply: cpcap-battery: constify psy_desc
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] wlcore: Fix command execute failure 19 for wl12xx
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: Downgrade exceeded max RX BA sessions to debug
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 02/18] arch: arm: Remove CONFIG_OPROFILE support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] host: omap_hsmmc: style: Simplify bool comparison
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH AUTOSEL 5.10 05/51] ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: pci: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] Documentation: Replace lkml.org links with lore
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] host: omap_hsmmc: style: Simplify bool comparison
  • From: YANG LI <abaci-bugfix@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] Input: omap4-keypad - implement errata check for lost key-up events
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] Input: omap4-keypad - implement errata check for lost key-up events
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/5] Input: omap4-keypad - implement errata check for lost key-up events
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 4/5] Input: omap4-keypad - use PM runtime autosuspend
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/5] Input: omap4-keypad - move rest of key scanning to a separate function
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/5] Input: omap4-keypad - scan keys in two phases and simplify with bitmask
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/5] Input: omap4-keypad - disable unused long interrupts
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 5/5] Input: omap4-keypad - implement errata check for lost key-up events
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] Input: omap4-keypad - use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] Input: omap4-keypad - move rest of key scanning to a separate function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/5] Input: omap4-keypad - scan keys in two phases and simplify with bitmask
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] Input: omap4-keypad - use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] Input: omap4-keypad - use PM runtime autosuspend
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/5] Input: omap4-keypad - move rest of key scanning to a separate function
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/5] Input: omap4-keypad - scan keys in two phases and simplify with bitmask
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Documentation: Replace lkml.org links with lore
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 15/15] power: supply: cpcap-battery: Fix typo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/15] power: supply: cpcap-battery: Implement capacity reporting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/15] power: supply: cpcap-battery: Add charge_now property
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/15] power: supply: cpcap-battery: Keep track of state for capacity reporting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/15] power: supply: cpcap-battery: Add charge_full property
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/15] power: supply: cpcap-charger: Provide state updates for battery from charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/15] power: supply: cpcap-battery: Use charger status for battery full detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/15] power: supply: cpcap-charger: Drop internal state and use generic stats
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/15] power: supply: cpcap-charger: Limiting charge current on Droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/15] power: supply: cpcap-charger: Simplify things with enable and disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/15] power: supply: cpcap-charger: Use standard enumeration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/15] power: supply: cpcap-charger: Fix missing power_supply_put()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/15] power: supply: cpcap-charger: Make VBUS already provided debug only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/15] power: supply: cpcap-charger: Fix flakey reboot with charger connected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/15] power: supply: cpcap-battery: Fix missing power_supply_put()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/15] Updates for cpcap charger and battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/5] Input: omap4-keypad - implement errata check for lost key-up events
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] Input: omap4-keypad - use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] Input: omap4-keypad - move rest of key scanning to a separate function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] Input: omap4-keypad - scan keys in two phases and simplify with bitmask
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] Input: omap4-keypad - disable unused long interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv5 0/5] Lost key-up interrupt handling for omap4-keypad
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] Input: omap4-keypad - use PM runtime to check keys for errata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] Input: omap4-keypad - simplify probe with devm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] irqchip: Simplify the TI_PRUSS_INTC Kconfig
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 3/4] Input: omap4-keypad - use PM runtime to check keys for errata
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 4/4] Input: omap4-keypad - simplify probe with devm
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2] ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap_device: fix idling of devices during probe
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 04/20] mtd: nand: ecc-bch: Stop exporting the private structure
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] soc: ti: pruss: Correct the pruss_clk_init error trace text
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] irqchip: Simplify the TI_PRUSS_INTC Kconfig
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v4 39/80] drm/panel: Move OMAP's DSI command mode panel driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v4 39/80] drm/panel: Move OMAP's DSI command mode panel driver
  • From: "Dixit, Ashutosh" <ashutosh.dixit@xxxxxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap_device: fix idling of devices during probe
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap_device: fix idling of devices during probe
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [REGRESSION] mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] irqchip: Simplify the TI_PRUSS_INTC Kconfig
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] Input: omap4-keypad - simplify probe with devm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• RE: [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2
  • From: Athani Nadeem Ladkhan <nadeem@xxxxxxxxxxx>
• [PATCH 3/4] PCI: dwc: Rename callback function func_conf_select and its instance
  • From: Zhiqiang Hou <Zhiqiang.Hou@xxxxxxx>
• [PATCH 2/4] PCI: dwc: Add CFG offset info into function's represented structure
  • From: Zhiqiang Hou <Zhiqiang.Hou@xxxxxxx>
• [PATCH 4/4] PCI: dwc: Change the parameter of function dw_pcie_ep_reset_bar()
  • From: Zhiqiang Hou <Zhiqiang.Hou@xxxxxxx>
• [PATCH 1/4] PCI: dwc: Change to use an array to store the structure of functions
  • From: Zhiqiang Hou <Zhiqiang.Hou@xxxxxxx>
• [PATCH 0/4] PCI: dwc: Refine the EP code no functionality change
  • From: Zhiqiang Hou <Zhiqiang.Hou@xxxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 4/4] Input: omap4-keypad - simplify probe with devm
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/4] Input: omap4-keypad - use PM runtime to check keys for errata
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/4] Input: omap4-keypad - use PM runtime to check keys for errata
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/4] Input: omap4-keypad - use PM runtime to check keys for errata
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/4] Input: omap4-keypad - scan keys in two phases and simplify with bitmask
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/4] Input: omap4-keypad - simplify probe with devm
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 3/4] Input: omap4-keypad - use PM runtime to check keys for errata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] Input: omap4-keypad - simplify probe with devm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] Input: omap4-keypad - scan keys in two phases and simplify with bitmask
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] Input: omap4-keypad - disable unused long interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv4 0/4] Lost key-up interrupt handling for omap4-keypad
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 1/1] power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH v2 2/5] remoteproc: pru: Add APIs to get and put the PRU cores
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 1/1] power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: Add PRU consumer bindings
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 1/1] ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v2 2/4] dt-bindings: pci: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/4] AM64: Add PCIe bindings and driver support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/4] PCI: j721e: Add support to provide refclk to PCIe connector
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/4] dt-bindings: pci: ti,j721e: Add endpoint mode dt-bindings for TI's AM64 SoC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/4] dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 4/4] PCI: j721e: Add support to provide refclk to PCIe connector
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] phy: cpcap-usb: Fix warning for missing regulator_disable
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/1] power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap: Add missing IRQF_ONESHOT to fix regression
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCHv6 0/4] n_gsm serdev support and protocol driver for droid4 modem
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] wlcore: Downgrade exceeded max RX BA sessions to debug
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: motorola-mapphone: Add 1.2GHz OPP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: Add PRU consumer bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: motorola-mapphone: Configure lower temperature passive cooling
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] ARM: dts: motorola-mapphone: Configure lower temperature passive cooling
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 1/1] ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: motorola-mapphone: Add 1.2GHz OPP
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] wlcore: Fix command execute failure 19 for wl12xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH v2 1/1] power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 1/1] ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 1/1] power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2
  • From: Nadeem Athani <nadeem@xxxxxxxxxxx>
• [PATCH v7 2/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Nadeem Athani <nadeem@xxxxxxxxxxx>
• [PATCH v7 1/2] PCI: cadence: Shifting of a function to support new code.
  • From: Nadeem Athani <nadeem@xxxxxxxxxxx>
• [am33xx-clocks.dtsi] move ieee5000 ti,gate-clock to a ti,clkctrl?
  • From: Oskar Holmlund <info@xxxxxxxxx>
• [PATCH v2] remoteproc: pru: Fix loading of GNU Binutils ELF
  • From: Dimitar Dimitrov <dimitar@xxxxxxxx>
• [PATCH] phy: cpcap-usb: Fix warning for missing regulator_disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] power: supply: cpcap: Add missing IRQF_ONESHOT to fix regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] DTS: ARM: gta04: SPI panel chip select is active low
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] thermal: ti-soc-thermal: Simplify polling with iopoll
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] thermal: ti-soc-thermal: Use non-inverted define for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] ARM: dts: motorola-mapphone: Configure lower temperature passive cooling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: motorola-mapphone: Add 1.2GHz OPP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: Configure missing thermal interrupt for 4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [PATCH v6 1/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• [PATCH -next] bus: ti-sysc: Use kzalloc for allocating only one thing
  • From: Zheng Yongjun <zhengyongjun3@xxxxxxxxxx>
• Re: [PATCH] remoteproc: pru: Fix loading of GNU Binutils ELF
  • From: Dimitar Dimitrov <dimitar@xxxxxxxx>
• Re: [PATCH] remoteproc: pru: Fix loading of GNU Binutils ELF
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v6 2/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Nadeem Athani <nadeem@xxxxxxxxxxx>
• [PATCH v6 1/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Nadeem Athani <nadeem@xxxxxxxxxxx>
• [PATCH v6 0/2] PCI: cadence: Retrain Link to work around Gen2
  • From: Nadeem Athani <nadeem@xxxxxxxxxxx>
• [PATCH] remoteproc: pru: Fix loading of GNU Binutils ELF
  • From: Dimitar Dimitrov <dimitar@xxxxxxxx>
• [PATCH] ARM: dts: omap3-echo: Add speaker sound card support
  • From: André Hentschel <nerv@xxxxxxxxxxx>
• Re: [PATCHv6 0/4] n_gsm serdev support and protocol driver for droid4 modem
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 1/4] dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/4] dt-bindings: pci: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 4/4] PCI: j721e: Add support to provide refclk to PCIe connector
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/4] dt-bindings: pci: ti,j721e: Add endpoint mode dt-bindings for TI's AM64 SoC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/4] AM64: Add PCIe bindings and driver support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCHv6 0/4] n_gsm serdev support and protocol driver for droid4 modem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH -next] video: fbdev: omap2: Use DEFINE_SPINLOCK() for spinlock
  • From: Zheng Yongjun <zhengyongjun3@xxxxxxxxxx>
• [PATCH] DTS: ARM: gta04: SPI panel chip select is active low
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 047/130] ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 33/87] ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 28/66] ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 21/48] ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 18/38] ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: Add PRU consumer bindings
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] dmaengine: ti: Maintainer mail address change
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 01/23] kernel: irq: irqdescs: warn on spurious IRQ
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Athani Nadeem Ladkhan <nadeem@xxxxxxxxxxx>
• Re: [PATCH 01/23] kernel: irq: irqdescs: warn on spurious IRQ
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCHv6 0/4] n_gsm serdev support and protocol driver for droid4 modem
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: Add PRU consumer bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: OSK: fix ohci-omap breakage
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/23] kernel: irq: irqdescs: warn on spurious IRQ
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 01/23] kernel: irq: irqdescs: warn on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 02/23] arch: alpha: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 03/23] arch: arm: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 07/23] arch: parisc: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 08/23] arch: powerpc: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 11/23] arch: sparc: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 09/23] arch: s390: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 05/23] arch: ia64: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 04/23] arch: c6x: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• (repost) cleaning up handling of bad IRQs
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 10/23] arch: sh: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 12/23] arch: x86: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 13/23] arch: generic: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 06/23] arch: mips: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 14/23] kernel: generic counter for interrupt errors
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 15/23] arch: mips: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 17/23] arch: arm: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 18/23] arch: arm64: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 16/23] arch: alpha: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 19/23] arch: c6x: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 06/23] arch: mips: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 11/23] arch: sparc: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 13/23] arch: generic: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 09/23] arch: s390: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 07/23] arch: parisc: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 02/23] arch: alpha: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 05/23] arch: ia64: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 17/23] arch: arm: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 18/23] arch: arm64: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 08/23] arch: powerpc: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 10/23] arch: sh: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 03/23] arch: arm: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 19/23] arch: c6x: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 14/23] kernel: generic counter for interrupt errors
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 12/23] arch: x86: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 16/23] arch: alpha: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 15/23] arch: mips: use generic irq error counter
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 01/23] kernel: irq: irqdescs: warn on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 04/23] arch: c6x: drop misleading warning on spurious IRQ
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• cleanup handling of bad IRQs
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH] MAINTAINERS: Update address for OMAP GPMC driver
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 3/3] thermal/core: Remove ms based delay fields
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• RE: [PATCH v2 3/3] thermal/core: Remove ms based delay fields
  • From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: OSK: fix ohci-omap breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] DTS: ARM: gta04: remove legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] thermal/core: Remove ms based delay fields
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v2 3/3] thermal/core: Remove ms based delay fields
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH -next] ti/fapll: Delete useless kfree code
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] clk: ti: Fix memleak in ti_fapll_synth_setup
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 3/3] thermal/core: Remove ms based delay fields
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCHv8 0/6] n_gsm serdev support and GNSS driver for droid4
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH v2 3/3] thermal/core: Remove ms based delay fields
  • From: "Peter Kästle" <peter@xxxxxxxx>
• [PATCH v2 3/3] thermal/core: Remove ms based delay fields
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 4/5] remoteproc: pru: Add pru_rproc_set_ctable() function
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 5/5] remoteproc: pru: Configure firmware based on client setup
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 3/5] remoteproc: pru: Deny rproc sysfs ops for PRU client driven boots
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: remoteproc: Add PRU consumer bindings
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 2/5] remoteproc: pru: Add APIs to get and put the PRU cores
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 0/5] Introduce PRU remoteproc consumer API
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: remoteproc: Add PRU consumer bindings
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH 0/2] ASoC: ti: Maintainer mail address change
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update addresses for TI display drivers
  • From: Jyri Sarha <jyri.sarha@xxxxxx>
• Re: [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] MAINTAINERS: Update addresses for TI display drivers
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH -next] ti/fapll: Delete useless kfree code
  • From: Zheng Yongjun <zhengyongjun3@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Update addresses for TI display drivers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v5] PCI: cadence: Retrain Link to work around Gen2 training defect.
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/2] MAINTAINERS: Update email address for TI ASoC and twl4030 codec drivers
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [RFC PATCH] RFC: drivers: gpio: helper for generic pin IRQ handling
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>