Based on linux-gpio discussion [1], it is best practice to make the gpio-line-names unique. Generic names like "[ethernet]" are replaced with the name of the unique signal on the AM3358 SoC ball corresponding to the gpio line. "[NC]" is also renamed to the standard "NC" name to represent "not connected". [1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/ Signed-off-by: Drew Fustini <drew@xxxxxxxxxxxxxxx> --- Tony - I have fixed the conflict so this now applies against mainline. arch/arm/boot/dts/am335x-boneblack.dts | 132 ++++++++++++------------- 1 file changed, 66 insertions(+), 66 deletions(-) diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index b4feb85e171a..e2ee8b8c07bc 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -26,54 +26,54 @@ oppnitro-1000000000 { &gpio0 { gpio-line-names = - "[ethernet]", - "[ethernet]", + "[mdio_data]", + "[mdio_clk]", "P9_22 [spi0_sclk]", "P9_21 [spi0_d0]", "P9_18 [spi0_d1]", "P9_17 [spi0_cs0]", - "[sd card]", - "P9_42A [ecappwm0]", - "P8_35 [hdmi]", - "P8_33 [hdmi]", - "P8_31 [hdmi]", - "P8_32 [hdmi]", + "[mmc0_cd]", + "P8_42A [ecappwm0]", + "P8_35 [lcd d12]", + "P8_33 [lcd d13]", + "P8_31 [lcd d14]", + "P8_32 [lcd d15]", "P9_20 [i2c2_sda]", "P9_19 [i2c2_scl]", "P9_26 [uart1_rxd]", "P9_24 [uart1_txd]", - "[ethernet]", - "[ethernet]", - "[usb]", - "[hdmi]", + "[rmii1_txd3]", + "[rmii1_txd2]", + "[usb0_drvvbus]", + "[hdmi cec]", "P9_41B", - "[ethernet]", + "[rmii1_txd1]", "P8_19 [ehrpwm2a]", "P8_13 [ehrpwm2b]", - "[NC]", - "[NC]", + "NC", + "NC", "P8_14", "P8_17", - "[ethernet]", - "[ethernet]", + "[rmii1_txd0]", + "[rmii1_refclk]", "P9_11 [uart4_rxd]", "P9_13 [uart4_txd]"; }; &gpio1 { gpio-line-names = - "P8_25 [emmc]", - "[emmc]", - "P8_5 [emmc]", - "P8_6 [emmc]", - "P8_23 [emmc]", - "P8_22 [emmc]", - "P8_3 [emmc]", - "P8_4 [emmc]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", + "P8_25 [mmc1_dat0]", + "[mmc1_dat1]", + "P8_5 [mmc1_dat2]", + "P8_6 [mmc1_dat3]", + "P8_23 [mmc1_dat4]", + "P8_22 [mmc1_dat5]", + "P8_3 [mmc1_dat6]", + "P8_4 [mmc1_dat7]", + "NC", + "NC", + "NC", + "NC", "P8_12", "P8_11", "P8_16", @@ -82,13 +82,13 @@ &gpio1 { "P9_23", "P9_14 [ehrpwm1a]", "P9_16 [ehrpwm1b]", - "[emmc]", + "[emmc rst]", "[usr0 led]", "[usr1 led]", "[usr2 led]", "[usr3 led]", - "[hdmi]", - "[usb]", + "[hdmi irq]", + "[usb vbus oc]", "[hdmi audio]", "P9_12", "P8_26", @@ -116,38 +116,38 @@ &gpio2 { "P8_38 [hdmi]", "P8_36 [hdmi]", "P8_34 [hdmi]", - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[ethernet]", + "[rmii1_rxd3]", + "[rmii1_rxd2]", + "[rmii1_rxd1]", + "[rmii1_rxd0]", "P8_27 [hdmi]", "P8_29 [hdmi]", "P8_28 [hdmi]", "P8_30 [hdmi]", - "[emmc]", - "[emmc]", - "[emmc]", - "[emmc]", - "[emmc]", - "[emmc]"; + "[mmc0_dat3]", + "[mmc0_dat2]", + "[mmc0_dat1]", + "[mmc0_dat0]", + "[mmc0_clk]", + "[mmc0_cmd]"; }; &gpio3 { gpio-line-names = - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[i2c0]", - "[i2c0]", - "[emu]", - "[emu]", - "[ethernet]", - "[ethernet]", - "[NC]", - "[NC]", - "[usb]", + "[mii col]", + "[mii crs]", + "[mii rx err]", + "[mii tx en]", + "[mii rx dv]", + "[i2c0 sda]", + "[i2c0 scl]", + "[jtag emu0]", + "[jtag emu1]", + "[mii tx clk]", + "[mii rx clk]", + "NC", + "NC", + "[usb vbus en]", "P9_31 [spi1_sclk]", "P9_29 [spi1_d0]", "P9_30 [spi1_d1]", @@ -156,14 +156,14 @@ &gpio3 { "P9_27", "P9_41A", "P9_25", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]"; + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; }; -- 2.27.0
