From: Vladimir Oltean <vladimir.oltean@xxxxxxx> Make sure that the multicast router setting of the bridge is picked up correctly by DSA when joining, regardless of whether there are sandwiched interfaces or not. The SWITCHDEV_ATTR_ID_BRIDGE_MROUTER port attribute is only emitted from br_mc_router_state_change. Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> --- net/dsa/port.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/dsa/port.c b/net/dsa/port.c index ac1afe182c3b..8380509ee47c 100644 --- a/net/dsa/port.c +++ b/net/dsa/port.c @@ -189,6 +189,10 @@ static int dsa_port_switchdev_sync(struct dsa_port *dp, if (err && err != -EOPNOTSUPP) return err; + err = dsa_port_mrouter(dp->cpu_dp, br_multicast_router(br), extack); + if (err && err != -EOPNOTSUPP) + return err; + return 0; } @@ -212,6 +216,12 @@ static void dsa_port_switchdev_unsync(struct dsa_port *dp) dsa_port_set_state_now(dp, BR_STATE_FORWARDING); /* VLAN filtering is handled by dsa_switch_bridge_leave */ + + /* Some drivers treat the notification for having a local multicast + * router by allowing multicast to be flooded to the CPU, so we should + * allow this in standalone mode too. + */ + dsa_port_mrouter(dp->cpu_dp, true, NULL); } int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br, -- 2.25.1
