Fix the following gcc warning:
drivers/thermal/ti-soc-thermal/ti-bandgap.c:1146:7: warning: variable
‘val’ set but not used [-Wunused-but-set-variable].
Reported-by: Abaci Robot <abaci@xxxxxxxxxxxxxxxxx>
Signed-off-by: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 8a3646e..2df0e09 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1143,13 +1143,12 @@ static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
- u32 val = 0;
rval = &bgp->regval[i];
tsr = bgp->conf->sensors[i].registers;
if (TI_BANDGAP_HAS(bgp, COUNTER))
- val = ti_bandgap_readl(bgp, tsr->bgap_counter);
+ ti_bandgap_readl(bgp, tsr->bgap_counter);
if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
ti_bandgap_writel(bgp, rval->tshut_threshold,
--
1.8.3.1
