When the timer is configured in posted mode, we need to check the write-
posted status register (TWPS) before writing to the register.
We now check TWPS after the write starting with commit 52762fbd1c47
("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource
support").
For example, in the TRM for am571x the following is documented in chapter
"22.2.4.13.1.1 Write Posting Synchronization Mode":
"For each register, a status bit is provided in the timer write-posted
status (TWPS) register. In this mode, it is mandatory that software check
this status bit before any write access. If a write is attempted to a
register with a previous access pending, the previous access is discarded
without notice."
The regression happened when I updated the code to use standard read/write
accessors for the driver instead of using __omap_dm_timer_load_start().
We have__omap_dm_timer_load_start() check the TWPS status correctly using
__omap_dm_timer_write().
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/clocksource/timer-ti-dm-systimer.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -449,13 +449,13 @@ static int dmtimer_set_next_event(unsigned long cycles,
struct dmtimer_systimer *t = &clkevt->t;
void __iomem *pend = t->base + t->pend;
- writel_relaxed(0xffffffff - cycles, t->base + t->counter);
while (readl_relaxed(pend) & WP_TCRR)
cpu_relax();
+ writel_relaxed(0xffffffff - cycles, t->base + t->counter);
- writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl);
while (readl_relaxed(pend) & WP_TCLR)
cpu_relax();
+ writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl);
return 0;
}
@@ -490,18 +490,18 @@ static int dmtimer_set_periodic(struct clock_event_device *evt)
dmtimer_clockevent_shutdown(evt);
/* Looks like we need to first set the load value separately */
- writel_relaxed(clkevt->period, t->base + t->load);
while (readl_relaxed(pend) & WP_TLDR)
cpu_relax();
+ writel_relaxed(clkevt->period, t->base + t->load);
- writel_relaxed(clkevt->period, t->base + t->counter);
while (readl_relaxed(pend) & WP_TCRR)
cpu_relax();
+ writel_relaxed(clkevt->period, t->base + t->counter);
- writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
- t->base + t->ctrl);
while (readl_relaxed(pend) & WP_TCLR)
cpu_relax();
+ writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+ t->base + t->ctrl);
return 0;
}
--
2.30.1
