Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 25 October 2016 02:28 AM, John Syne wrote:
>> > On Oct 23, 2016, at 11:02 PM, Mugunthan V N <mugunthanvnm@xxxxxx> wrote:
>> > 
>> > Increase ADC reference clock from 3MHz to 24MHz so that the
>> > sampling rates goes up from 100K samples per second to 800K
>> > samples per second on AM335x and AM437x SoC.
>> > 
>> > Also increase opendelay for touchscreen configuration to
>> > equalize the increase in ADC reference clock frequency,
>> > which results in the same amount touch events reported via
>> > evtest on AM335x GP EVM.
>> > 
>> > Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
>> > ---
>> > 
>> > This patch depends on ADC DMA patch series [1]
>> > 
>> > Without DMA support, when ADC ref clock is set at 24MHz, I am
>> > seeing fifo overflow as CPU is not able to pull the ADC samples.
>> > This answers that DMA support is must for ADC to consume the
>> > samples generated at 24MHz with no open, step delay or
>> > averaging with patch [2].
>> > 
>> > Measured the performance with the iio_generic_buffer with the
>> > patch [3] applied
>> > 
>> > [1] - http://www.spinics.net/lists/devicetree/msg145045.html
>> > [2] - http://pastebin.ubuntu.com/23357935/
>> > [3] - http://pastebin.ubuntu.com/23357939/
>> > 
>> > ---
>> > include/linux/mfd/ti_am335x_tscadc.h | 4 ++--
>> > 1 file changed, 2 insertions(+), 2 deletions(-)
>> > 
>> > diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
>> > index b9a53e0..96c4207 100644
>> > --- a/include/linux/mfd/ti_am335x_tscadc.h
>> > +++ b/include/linux/mfd/ti_am335x_tscadc.h
>> > @@ -90,7 +90,7 @@
>> > /* Delay register */
>> > #define STEPDELAY_OPEN_MASK	(0x3FFFF << 0)
>> > #define STEPDELAY_OPEN(val)	((val) << 0)
>> > -#define STEPCONFIG_OPENDLY	STEPDELAY_OPEN(0x098)
> Wouldn’t this be better to add this to the devicetree?
> 
> 	ti,chan-step-avg = <0x16 0x16 0x16 0x16 0x16 0x16 0x16>;
> 	ti,chan-step-opendelay = <0x500 0x500 0x500 0x500 0x500 0x500 0x500>;
> 	ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0>;

For a touch screen, there is not need to change in these parameter
settings, so my opinion is to keep it as is. Or am I missing something?

Regards
Mugunthan V N
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux