On Fri, Nov 04, 2016 at 10:31:38AM +0200, Felipe Balbi wrote: [snip] > Sounds like VBUS dropping to me. Remember, MUSB is really anal about > VBUS levels. If it drops enough for the PHY to report one of those 4 > VBUS levels, then MUSB just gives up. > > What we used to do back at Nokia was disable reporting of some of those > VBUS levels at the PHY driver. Well, I was getting these even without anything connected to musb: [ 1526.594696] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90, <VBusValid), retry #0, port1 00000104 [ 485.244781] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90, <VBusValid), retry #0, port1 00000104 ...and with the hub connected: [ 562.803833] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90, <VBusValid), retry #0, port1 00000507 [ 50.068664] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_idle (90, <VBusValid), retry #0, port1 00000507 And indeed, after these errors musb gives up. However these are gone with Tony's last patch. Bisecting now, approx 6 iterations left. Best regards, ladis -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
