Hi! > >> >> Better then previous one. > >> >> > >> >> But my version of bq27xxx_battery.c already contains this: > >> > > >> > This is for allowing udev rule to set the properties as well. > >> > otherwise a kinda crude RUN = " echo value > > >> > /sys/module/bq27xxx_battery/parameters/poll_interval" is required. > >> > >> Any thoughts on this? > > > > I'd say echo value > > > /sys/module/bq27xxx_battery/parameters/poll_interval .. is quite > > adequate solution...? > > > > Alternatively, convince us that something else is useful for everyone, > > and we can do the right thing (poll more often when battery is nearly > > empty), automatically... > > Ok should have had the patchset set it per device, and not use the > global poll_interval. Of need to add some logic to see if uses the > global poll_interval or it's own setting. > > There are times where you could have multiple batteries connected to > multiple fuel gauges, and want to up the polling interval on certain > ones that are discharging at different rates. > > But of course I'll let you guys let me know if this seems useful at all. I agree per-device polling would be cleaner. But unless you have hardware with more than one bq27xxx, I'd avoid the work... Now... its also possible that poll_interval should change itself (within kernel) to do the right thing. Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
