Currently we claim that omap4-panda and omap4-panda-es are essentially the same, but they are not since PandaBoard-ES uses OMAP4460 and PandaBoard uses OMAP4430. So, split the common definition and make the model name available. Signed-off-by: Nishanth Menon <nm@xxxxxx> --- Based on v3.17-rc2 Testing logs: (boot test): Before Patch(v3.17-rc2) 1: pandaboard-es: Boot PASS: http://slexy.org/raw/s209HfpVTs 2: pandaboard-vanilla: Boot PASS: http://slexy.org/raw/s21YNmOhQL After Patch 1: pandaboard-es: Boot PASS: http://slexy.org/raw/s20FH76BTn 2: pandaboard-vanilla: Boot PASS: http://slexy.org/raw/s2vFLcfkBu Note: 'ti,omap4-panda-es' is not documented in bindings, not entirely sure if we should be doing the same for every board compatibility. arch/arm/boot/dts/omap4-panda-common.dtsi | 3 --- arch/arm/boot/dts/omap4-panda-es.dts | 5 +++++ arch/arm/boot/dts/omap4-panda.dts | 5 +++++ 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 8cfa3c8..1505135 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -8,9 +8,6 @@ #include "elpida_ecb240abacn.dtsi" / { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - memory { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 816d1c9..2f1dabc 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -10,6 +10,11 @@ #include "omap4460.dtsi" #include "omap4-panda-common.dtsi" +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 6189a8b..a0e28b2 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -9,3 +9,8 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; +}; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html