Add RAMINIT specific bits into the DCAN nodes.
Also rename can nodes from "d_can" to "can" to be compliant
with the ePAPR specs.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
arch/arm/boot/dts/am33xx.dtsi | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 492c043..0661cdd 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -334,20 +334,26 @@
interrupts = <91>;
};
- dcan0: d_can@481cc000 {
+ dcan0: can@481cc000 {
compatible = "bosch,d_can";
ti,hwmods = "d_can0";
reg = <0x481cc000 0x2000
- 0x44e10644 0x4>;
+ 0x644 0x4>; /* index to RAMINIT reg within syscon */
+ ti,raminit-syscon = <&am33xx_control_module>;
+ ti,raminit-start-bit = <0>;
+ ti,raminit-done-bit = <8>;
interrupts = <52>;
status = "disabled";
};
- dcan1: d_can@481d0000 {
+ dcan1: can@481d0000 {
compatible = "bosch,d_can";
ti,hwmods = "d_can1";
reg = <0x481d0000 0x2000
- 0x44e10644 0x4>;
+ 0x644 0x4>; /* index to RAMINIT reg within syscon */
+ ti,raminit-syscon = <&am33xx_control_module>;
+ ti,raminit-start-bit = <1>;
+ ti,raminit-done-bit = <9>;
interrupts = <55>;
status = "disabled";
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
