Add RAMINIT specific bits into the DCAN nodes. Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- arch/arm/boot/dts/am4372.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d38a0ed..847f41b 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -899,7 +899,10 @@ clocks = <&dcan0_fck>; clock-names = "fck"; reg = <0x481cc000 0x2000 - 0x44e10644 0x4>; + 0x644 0x4>; /* index to RAMINIT reg within syscon */ + ti,raminit-syscon = <&am43xx_control_module>; + ti,raminit-start-bit = <0>; + ti,raminit-done-bit = <8>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -910,7 +913,10 @@ clocks = <&dcan1_fck>; clock-names = "fck"; reg = <0x481d0000 0x2000 - 0x44e10644 0x4>; + 0x644 0x4>; /* index to RAMINIT reg within syscon */ + ti,raminit-syscon = <&am43xx_control_module>; + ti,raminit-start-bit = <1>; + ti,raminit-done-bit = <9>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html