Hi,
On 09/08/2014 04:24 PM, Felipe Balbi wrote:
Hi,
On Mon, Sep 08, 2014 at 02:34:33PM +0300, Dmitry Lifshitz wrote:
Hi Felipe, Roger
On 04/16/2014 07:16 PM, Felipe Balbi wrote:
On Fri, Oct 11, 2013 at 05:46:12PM +0300, Roger Quadros wrote:
Hi,
On 10/10/2013 01:49 PM, Kishon Vijay Abraham I wrote:
From: George Cherian <george.cherian@xxxxxx>
Added dr_mode property in dwc3 and set its default mode to device.
If there is a specific reason why this is not set to "otg", we need
to explain it here.
AFAIK the port is meant to be used as OTG port.
we still don't have the workaround for dual role ports, I've been
working on it but still need to retest and make sure it's working fine
before merging upstream.
Does the OTG port suppose to work with OMAP5? I mean role switching
mechanism?
I'm testing kernel v3.16 with OMAP5 based board (CM-T54).
If I set CONFIG_USB_DWC3_DUAL_ROLE, than nothing is going on when I plug
some device/host cable into micro USB3.0 port (VBUS/ID detection with extcon
events works fine).
Dual role does not work. We allow the driver to the built with both Host
and Peripheral support because some platforms have more than one port
and building the driver with dual role allows us to make one port host
and one peripheral.
Please, can you provide some detail about platforms with several ports.
How do that ports are connected to DWC3?
Thanks,
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
