The d_can driver expects appropriately named aliases for
the d_can nodes for the RAMINIT control register access.
Provide those, otherwise RAMINIT register won't be configured.
Get's rid of the following messages during boot.
[ 16.419354] c_can_platform 481cc000.can: control memory is not used for raminit
[ 16.449142] c_can_platform 481d0000.can: control memory is not used for raminit
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Reviewed-by: Felipe Balbi <balbi@xxxxxx>
---
arch/arm/boot/dts/am4372.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 3514d0a..a705e50 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -25,6 +25,8 @@
serial0 = &uart0;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
+ d_can0 = &dcan0;
+ d_can1 = &dcan1;
};
cpus {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
