Re: [PATCH 2/2] ARM: dts: omap5: Add dr_mode for dwc3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Sep 08, 2014 at 03:32:37PM +0300, Dmitry Lifshitz wrote:
> Hi Roger,
> 
> Thank you for a quick reply. See, my reply below.
> 
> On 09/08/2014 02:39 PM, Roger Quadros wrote:
> >On 09/08/2014 02:34 PM, Dmitry Lifshitz wrote:
> >>Hi Felipe, Roger
> >>
> >>On 04/16/2014 07:16 PM, Felipe Balbi wrote:
> >>>On Fri, Oct 11, 2013 at 05:46:12PM +0300, Roger Quadros wrote:
> >>>>Hi,
> >>>>
> >>>>On 10/10/2013 01:49 PM, Kishon Vijay Abraham I wrote:
> >>>>>From: George Cherian <george.cherian@xxxxxx>
> >>>>>
> >>>>>Added dr_mode property in dwc3 and set its default mode to device.
> >>>>
> >>>>If there is a specific reason why this is not set to "otg", we need
> >>>>to explain it here.
> >>>>
> >>>>AFAIK the port is meant to be used as OTG port.
> >>>
> >>>we still don't have the workaround for dual role ports, I've been
> >>>working on it but still need to retest and make sure it's working fine
> >>>before merging upstream.
> >>>
> >>
> >>
> >>Does the OTG port suppose to work with OMAP5? I mean role switching mechanism?
> >>
> >>I'm testing kernel v3.16 with OMAP5 based board (CM-T54).
> >>
> >>If I set CONFIG_USB_DWC3_DUAL_ROLE, than nothing is going on when I plug some device/host cable into micro USB3.0 port (VBUS/ID detection with extcon events works fine).
> >>
> >>CONFIG_USB_DWC3_HOST/CONFIG_USB_DWC3_GADGET bring port to appropriate mode and it works.
> >>
> >>What is the purpose of setting dr_mode = "peripheral" in omap5.dtsi, since it is overridden by config options in dwc3_probe()?
> >
> >If dual role works it should be "otg" then. I'm not sure why it was set to peripheral. Maybe the role switching mechanism
> >was not in place earlier.
> 
> 
> This is what I have when setting dr_mode = "otg" (and compiling with
> CONFIG_USB_DWC3_DUAL_ROLE):
> 
> when load gadget driver and plugging host PC cable:
> 
> root@cm-debian:~# modprobe g_ether
> using random self ethernet address
> using random host ethernet address
> usb0: HOST MAC fa:db:52:7f:95:c5
> usb0: MAC be:75:8d:71:6d:02
> using random self ethernet address
> using random host ethernet address
> g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
> g_ether gadget: g_ether ready
> root@cm-debian:~# ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 65 at /home/lifshitz/workroot/git-repo/OMAP5/omap5-kernel/drivers/bus/omap_l3_noc.c:147
> l3_handle_target.isra.2+0x230/0x27c()
> 44000000.ocp:L3 Standard Error: MASTER UN IDENTIFIED TARGET OCMRAM (Read):
> At Address: 0x00000000 : Data Access in User mode during Functional access
> Modules linked in: usb_f_eem g_ether usb_f_rndis libcomposite u_ether
> configfs rfcomm ecb btmrvl_sdio btmrvl bluetooth mwifiex_sdio mwifiex dwc3
> ahci_platform libahci_platform libahci libata snd_soc_cm_t54 ads7846
> dwc3_omap extcon_palmas rtc_palmas extcon_class at24 snd_soc_wm8731
> snd_soc_omap_mcbsp
> CPU: 0 PID: 65 Comm: irq/39-palmas Tainted: G        W 3.16.0-cm-t54+ #99
> [<c00156d0>] (unwind_backtrace) from [<c00124ac>] (show_stack+0x10/0x14)
> [<c00124ac>] (show_stack) from [<c05e29dc>] (dump_stack+0x74/0x8c)
> [<c05e29dc>] (dump_stack) from [<c0037dbc>] (warn_slowpath_common+0x70/0x88)
> [<c0037dbc>] (warn_slowpath_common) from [<c0037e68>]
> (warn_slowpath_fmt+0x30/0x40)
> [<c0037e68>] (warn_slowpath_fmt) from [<c02d88b8>]
> (l3_handle_target.isra.2+0x230/0x27c)
> [<c02d88b8>] (l3_handle_target.isra.2) from [<c02d89b0>]
> (l3_interrupt_handler+0xac/0x13c)
> [<c02d89b0>] (l3_interrupt_handler) from [<c007ea00>]
> (handle_irq_event_percpu+0x7c/0x230)
> [<c007ea00>] (handle_irq_event_percpu) from [<c007ebf8>]
> (handle_irq_event+0x44/0x64)
> [<c007ebf8>] (handle_irq_event) from [<c0081b78>]
> (handle_fasteoi_irq+0xa8/0x134)
> [<c0081b78>] (handle_fasteoi_irq) from [<c007e398>]
> (generic_handle_irq+0x20/0x30)
> [<c007e398>] (generic_handle_irq) from [<c000f4ac>] (handle_IRQ+0x40/0x90)
> [<c000f4ac>] (handle_IRQ) from [<c0008620>] (gic_handle_irq+0x2c/0x60)
> [<c0008620>] (gic_handle_irq) from [<c05eacc0>] (__irq_svc+0x40/0x50)
> Exception stack(0xec939d80 to 0xec939dc8)
> 9d80: ecb729b0 20000013 00000000 00000001 ecb72800 eca1e000 00000000
> ec939e44
> 9da0: ec939ed0 20000013 ecb72818 ed005e14 ec939ec8 ec939dc8 bf015f54
> c05ea548
> 9dc0: 80000013 ffffffff
> [<c05eacc0>] (__irq_svc) from [<c05ea548>]
> (_raw_spin_unlock_irqrestore+0x1c/0x20)
> [<c05ea548>] (_raw_spin_unlock_irqrestore) from [<bf015f54>]
> (extcon_update_state+0x144/0x1c4 [extcon_class])
> [<bf015f54>] (extcon_update_state [extcon_class]) from [<bf023288>]
> (palmas_vbus_irq_handler+0x64/0xa0 [extcon_palmas])
> [<bf023288>] (palmas_vbus_irq_handler [extcon_palmas]) from [<c00815a8>]
> (handle_nested_irq+0xa0/0x10c)
> [<c00815a8>] (handle_nested_irq) from [<c03ab85c>]
> (regmap_irq_thread+0x184/0x300)
> [<c03ab85c>] (regmap_irq_thread) from [<c007f8b8>] (irq_thread_fn+0x1c/0x40)
> [<c007f8b8>] (irq_thread_fn) from [<c007f6a4>] (irq_thread+0x120/0x15c)
> [<c007f6a4>] (irq_thread) from [<c0056434>] (kthread+0xdc/0xf0)
> [<c0056434>] (kthread) from [<c000eb98>] (ret_from_fork+0x14/0x3c)
> ---[ end trace 3b365a734f7f3202 ]---
> palmas-usb 48070000.i2c:palmas@48:palmas_usb: USB cable is attached
> 
> 
> 
> when plugging storage device:
> 
> root@cm-debian:~# dmesg | tail -n20
> ...
> omap-dwc3 4a020000.omap_dwc3: ID GND
> palmas-usb 48070000.i2c:palmas@48:palmas_usb: USB-HOST cable is attached
> palmas-usb 48070000.i2c:palmas@48:palmas_usb: USB cable is attached
> 
> and nothing is going on.
> 
> Once again, when compiling with predefined role
> (CONFIG_USB_DWC3_HOST/CONFIG_USB_DWC3_GADGET) the port is functional in both
> modes.
> 
> I'm wondering, if dwc3_probe() calls
> dwc3_core_init_mode() -> dwc3_set_mode() than why it is not required in
> dwc3_omap_set_mailbox()?

no, it's not required there. that mailbox is basically just telling the
IP about VBUS levels and ID state. Nothing more.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux