Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 6/6] OMAP: GPIO: remove duplicate debugfs interface
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] OMAP3: GPIO: Removed a couple of unneeded registers from context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] OMAP3: GPIO: disable GPIO debounce clocks on idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] OMAP3: GPIO: Only enable WAKEUPEN for edge detection GPIOs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] OMAP3: GPIO fixes for off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] omap: pm34xx: Remove PER wakeup dependency on CORE.
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH v2 1/2] omap: pm34xx: Enable IO / IO-CHAIN wakeups for PER
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [PATCH 1/2] omap: pm34xx: Enable IO / IO-CHAIN wakeups for PER
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [PATCH 1/2] omap: pm34xx: Enable IO / IO-CHAIN wakeups for PER
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 3/3] OMAP3: PM: Add milliseconds interface to suspend wakeup timer
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] OMAP3: PRCM interrupt: only check and clear enabled PRCM IRQs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] OMAP3: Serial: Improved sleep logic
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] OMAP PM core updates for 2.6.35
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] omap: pm34xx: Enable IO / IO-CHAIN wakeups for PER
  • From: Mike Chan <mike@xxxxxxxxxxx>
• [PATCH 2/2] omap: pm34xx: Remove PER wakeup dependency on CORE.
  • From: Mike Chan <mike@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Mike Rapoport <mike.rapoport@xxxxxxxxx>
• Re: [PATCH v3] arm: Fix .gitignore for boot/compressed folder
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v3] arm: Fix .gitignore for boot/compressed folder
  • From: Sergio Aguirre <saaguirre@xxxxxx>
• RE: [Query][omap iommu] Consulting iommu if a physical region is "mappable" before actually mapping it
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [RFC/PATCH 6/8] omap: mailbox: more more stuff to omap2_mbox_init
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [Query][omap iommu] Consulting iommu if a physical region is "mappable" before actually mapping it
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• RE: [PATCH] arm: Fix .gitignore for boot/compressed folder
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• RE: [RFC/PATCH 6/8] omap: mailbox: more more stuff to omap2_mbox_init
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH] arm: Fix .gitignore for boot/compressed folder
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 5/8] omap: mailbox: reorganize omap2 platform_device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC/PATCH 5/8] omap: mailbox: reorganize omap2 platform_device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] omap: mailbox: fix reverse likeliness
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] ETM/JTAG components states across OFF modes
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• Re: [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] dma: fix scope of errata i88 upto 3430ES1.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [UPDATE] [PATCH 0/4] OMAP4 Ethernet Controller Support
  • From: "Arce, Abraham" <x0066660@xxxxxx>
• Re: [PATCH] OMAP3: PM: quickly hack fix up init_opp
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] omap: rx51: Add supplies for the tlv320aic3x codec driver
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 2/3] omap: rx51: Add i2c2 board_info with tlv320aic3x
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 1/3] omap: rx51: Change the TWL4030 VMMC2 voltage constraints and supply name
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: [PATCH] arm: Fix .gitignore for boot/compressed folder
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [RFC/PATCH 6/8] omap: mailbox: more more stuff to omap2_mbox_init
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v9] board-omap3-beagle: add DSS2 support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: OMAP 3530 LV-SOM support (was: Re: Patch format for submission?)
  • From: Stephan Linz <linz@xxxxxxxxxx>
• RE: [RFC/PATCH 6/8] omap: mailbox: more more stuff to omap2_mbox_init
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• [PATCH] OMAP2/3/4: DMA: reset controller during init
  • From: Mika Westerberg <ext-mika.1.westerberg@xxxxxxxxx>
• RE: [RFC] ETM/JTAG components states across OFF modes
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH v2] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Ranjith Lohithakshan <ranjithl@xxxxxx>
• [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• RE: [RFC][PATCH1/2] SFH7741: proximity sensor driver support
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [RFC][PATCH1/2] SFH7741: proximity sensor driver support
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [CBUS PATCH 2/2] cbus: switch kmalloc() + memset() to kzalloc()
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [CBUS PATCH 1/2] cbus: fix compilation with current mainline
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: ARM suspend to disk?
  • From: "Reddy, Teerth" <teerth@xxxxxx>
• Re: [PATCH v2] omap_hsmmc: improve interrupt synchronisation
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v2 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v2 19/21] OMAP: DSS2: Taal: Print panel name in addition to revision
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 16/21] OMAP: DSS2: Taal: Use Nokia DSI panel data
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 20/21] OMAP: DSS2: Taal: Add regulator configuration support
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 03/21] OMAP: DSS2: Taal: Add locks to protect taal data access
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 06/21] OMAP: DSS2: Taal: Fix request_irq() error handling
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 09/21] OMAP: DSS2: Taal: Bail out from taal_run_test() if panel is not enabled
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 12/21] OMAP: DSS2: Taal: Change ESD work management
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 13/21] OMAP: DSS2: Taal: Change probe error handling labels
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 17/21] OMAP: DSS2: Taal: Configure ESD check in DSI panel data
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 18/21] OMAP: DSS2: Taal: Add panel specific configuration structure
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 15/21] OMAP: DSS2: Add Nokia DSI command mode panel configuration struct
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 21/21] OMAP: DSS2: Taal: CABC workaround is Taal specific
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 08/21] OMAP: DSS2: Taal: Improve taal_power_on() error handling
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 05/21] OMAP: DSS2: Taal: Remove platform enable/disable
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 10/21] OMAP: DSS2: Taal: Change DSI bus locking to avoid deadlock in ESD work
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 04/21] OMAP: DSS2: Taal: Cosmetic improvement to backlight properties initialization
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 11/21] OMAP: DSS2: Taal: Check taal_power_on() return value in taal_resume()
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 14/21] OMAP: DSS2: Taal: Add proper external TE support
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 07/21] OMAP: DSS2: Taal: Remove ESD work cancel from driver probe error handling
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 00/21] OMAP: DSS2: Taal panel driver updates
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 02/21] OMAP: DSS2: Taal: add locks to taal_bl_update_status
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• [PATCH v2 01/21] OMAP: DSS2: Taal: Add panel hardware reset
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• Re: [PATCH v2 4/4] omap: mailbox: convert block api to kfifo
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [Query][omap iommu] Consulting iommu if a physical region is "mappable" before actually mapping it
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• FW: [PATCH2/2] SFH7741 : Adding board support for proximity sensor SFH7741
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• [RFC][PATCH1/2] SFH7741: proximity sensor driver support
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCH v2 4/4] omap: mailbox: convert block api to kfifo
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: ARM suspend to disk?
  • From: Peter Tseng <tsenpet09@xxxxxxxxx>
• Re: ARM suspend to disk?
  • From: Peter Tseng <tsenpet09@xxxxxxxxx>
• omap 2430 fsusb patches status
  • From: Viral Mehta <Viral.Mehta@xxxxxxxxxxxxxxx>
• Re: [PATCHv4 0/2] omap-sham: OMAP SHA1/MD5 driver
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: mailbox_mach dependency problem
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 8/8] omap: mailbox: always built-in omap2 platform data
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 7/8] omap: mailbox: split platform_driver
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 6/8] omap: mailbox: more more stuff to omap2_mbox_init
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 5/8] omap: mailbox: reorganize omap2 platform_device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 4/8] omap: mailbox: reorganize omap2 registering
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 3/8] omap: mailbox: 2420 should be detected at run-time
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 2/8] omap: mailbox: reorganize structures
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 1/8] omap: mailbox: trivial cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 0/8] omap: mailbox: split platform_driver
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] omap: mailbox: trivial cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] omap: mailbox: trivial cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v9] board-omap3-beagle: add DSS2 support
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: mailbox_mach dependency problem
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v2 3/4] omap: mailbox: fix reverse likeliness
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v2 2/4] omap: mailbox cleanup: split MODULE_AUTHOR line
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v2 1/4] omap: mailbox: convert rwlocks to spinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v2 0/4] omap: mailbox: cleanup & simplify
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: mailbox_mach dependency problem
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] arm: Fix .gitignore for boot/compressed folder
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH 5/6] DSPBRIDGE: do not use low level cache manipulation API
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: mailbox_mach dependency problem
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: mailbox_mach dependency problem
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFC/PATCH 6/6] DSPBRIDGE: add dspbridge API to mark end of DMA
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC/PATCH 5/6] DSPBRIDGE: do not use low level cache manipulation API
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC/PATCH 4/6] DSPBRIDGE: do not call follow_page
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC/PATCH 3/6] DSPBRIDGE: remove mapping information in proc_unmap
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC/PATCH 2/6] DSPBRIDGE: remember mapping and page info in proc_map
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC/PATCH 1/6] DSPBRIDGE: add memory_map_info to PROC
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC/PATCH 0/6] DSPBRIDGE: fix mem+cache API issues
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [CBUS PATCH 2/2] cbus: switch kmalloc() + memset() to kzalloc()
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [CBUS PATCH 1/2] cbus: fix compilation with current mainline
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 06/11] omap4: Fix omap_l2_cache_init not to run for other omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] save and restore etm state across core OFF modes
  • From: virtuoso@xxxxxxxxx
• [PATCH 6/6] omap3: make coresight register save across OFF modes a sysfs option
  • From: virtuoso@xxxxxxxxx
• [PATCH 4/6] omap3: move EMU peripheral addresses to a platform header
  • From: virtuoso@xxxxxxxxx
• [PATCH 2/6] coresight: cosmetic fixes
  • From: virtuoso@xxxxxxxxx
• [PATCH 1/6] coresight: add ETM management registers
  • From: virtuoso@xxxxxxxxx
• [PATCH 3/6] etm: do a dummy read from OSSRR during initialization
  • From: virtuoso@xxxxxxxxx
• [RFC] ETM/JTAG components states across OFF modes
  • From: virtuoso@xxxxxxxxx
• Re: [PATCH] save and restore etm state across core OFF modes
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• Re: mailbox_mach dependency problem
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] DSPBRIDGE: remove hw_prcm module and related functions
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH] OMAP3: PM: quickly hack fix up init_opp
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/3] DSPBRIDGE: remove hw_prcm module and related functions
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: omap-pm: omap3_pm_defconfig no longer booting on Overo
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: [PATCH 3/3] DSPBRIDGE: remove hw_prcm module and related functions
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• mailbox_mach dependency problem
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: ARM suspend to disk?
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH ] omap4: Move SOC specific code from board file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 06/11] omap4: Fix omap_l2_cache_init not to run for other omaps
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Cannot wakeup the SDP2430 sometimes, related to console input.
  • From: "Chen, Ming" <ming.chen@xxxxxxxxxxxxx>
• Re: omap-pm: omap3_pm_defconfig no longer booting on Overo
  • From: Peter Tseng <tsenpet09@xxxxxxxxx>
• Re: OMAP 3530 LV-SOM support (was: Re: Patch format for submission?)
  • From: Ashwin Bihari <abihari@xxxxxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/11] DSPBRIDGE: Rename functions which contain "wmd" and remove unused prototypes
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 02/11] DSPBRIDGE: Rename the device context handle variables
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 07/11] DSPBRIDGE: Rename "wmd" directory by "core"
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 10/11] DSPBRIDGE: Remove OS specific comments
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 06/11] DSPBRIDGE: Replace code containing "wcd"
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 09/11] DSPBRIDGE: Append the content of _dcd.h into dspapi.h
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 08/11] DSPBRIDGE: Rename files that refer to Windows OS
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 05/11] DSPBRIDGE: Replace code containing "WMD"
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 11/11] DSPBRIDGE: Rename header file guard macros that cointain WMD or WCD
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 00/11] DSPBRIDGE: Remove code and comments refering to other OS
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 01/11] DSPBRIDGE: Rename wmd_dev_context structure by bridge_dev_context
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• [PATCH 03/11] DSPBRIDGE: Rename variables and structures which contain "wmd"
  • From: Ivan Gomez Castellanos <ivan.gomez@xxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 9/9] OMAP:GPIO: Implement GPIO as a platform device
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/9] OMAP:GPIO: Introduce support for OMAP2PLUS chip specific GPIO
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Fix compilation error observed when cpufreq is disabled
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [Query][omap iommu] Consulting iommu if a physical region is "mappable" before actually mapping it
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: ARM suspend to disk?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: ARM suspend to disk?
  • From: Cliff Brake <cliff.brake@xxxxxxxxx>
• RE: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: omap_musb_board_data -- trouble specifying 500mA supply
  • From: Cliff Brake <cliff.brake@xxxxxxxxx>
• Re: [PATCH 2/2] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] omap: gpmc: add gpmc_cs_get_timings
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] omap: gpmc-nand: introduce omap2_nand_gpmc_round_timings helper
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 11/11] omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/11] omap2/3/4: Dissable CONFIG_PM_VERBOSE in omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/11] omap3: Remove non-muxable ball entries for 3630
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/11] omap2/3/4: Update PMIC options for TWL and Menelaus chips
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/11] omap2/3/4: Make omap3_defconfig usable on Nokia boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/11] omap4: Fix omap_l2_cache_init not to run for other omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/11] omap2/3/4: Add new boards to omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/11] omap4: Fix multiboot with CONFIG_PM and CONFIG_ARCH_OMAP3 selected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/11] omap3: Fix compile for board-cm-t35
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/11] omap2/3/4: Fix multi.h when omap3 and omap4 are selected without omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/11] omap2/3/4: Multi-omap updates to boot test with omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/7] OMAP4-HSMMC: Adding HSMMC support for OMAP4430 Board file
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] OMAP4-HSMMC: Adds Dummy Interface clock's for MMC controllers
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: [2.6.34-rc6] ARM: build breaks with KPROBES
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [2.6.34-rc6] ARM: build breaks with KPROBES
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• JFFS2 summary support : problem
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [2.6.34-rc6] ARM: build breaks with KPROBES
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic
  • From: Cyril Chemparathy <cyril@xxxxxx>
• Re: [Gumstix-users] omapfb fails to detect display
  • From: Thomas Klute <thomas2.klute@xxxxxxxxxxxxxxx>
• RE: [PATCH] DSPBRIDGE: MMU-Fault debugging enhancements
  • From: "Ramos Falcon, Ernesto" <ernesto@xxxxxx>
• RE: [PATCH 2/2] can:ti_hecc: board specific hookup on AM3517EVM
  • From: "Govindarajan, Sriramakrishnan" <srk@xxxxxx>
• Re: [PATCHv3 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• RE: [PATCH] Disable the non working eMMC on Zoom2/3
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• [RFC] [PATCH 2/2] Platform changes for CMA3000
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [PATCH] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Ranjith Lohithakshan <ranjithl@xxxxxx>
• OMAP 3530 LV-SOM support (was: Re: Patch format for submission?)
  • From: Zygo Blaxell <vger-linux-omap-esightcorp@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] omap3: Fix 3630 mux errors
  • From: Manjunatha GK <manjugk@xxxxxx>
• Re: [PATCH] omap3: Fix 3630 mux errors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap3: Fix 3630 mux errors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap-pm: omap3_pm_defconfig no longer booting on Overo
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] omap4: Move SOC specific code from board file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [2.6.34-rc6] ARM: build breaks with KPROBES
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• omap-pm: omap3_pm_defconfig no longer booting on Overo
  • From: Peter Tseng <tsenpet09@xxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Registering sgx device and it's platform data
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: ARM suspend to disk?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 00/22] OMAP3: PM: Smartreflex and voltage revamp
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP3: PM: Registering sgx device and it's platform data
  • From: Manjunatha GK <manjugk@xxxxxx>
• Re: [PATCH 1/4] omap: mailbox cleanup: convert rwlocks to spinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v8 2/2] omap hsmmc: adaptation of sdma descriptor autoloading feature
  • From: Venkatraman S <svenkatr@xxxxxx>
• [PATCH v8 1/2] sDMA: descriptor autoloading feature
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] omap: mailbox cleanup: convert rwlocks to spinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v8 0/2] sDMA descriptor autoloading feature
  • From: Venkatraman S <svenkatr@xxxxxx>
• Possible bug in onenand_base ?
  • From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
• RE: [PATCHv3 00/22] OMAP3: PM: Smartreflex and voltage revamp
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH] OMAP3: PM: Fix compilation error observed when cpufreq is disabled
  • From: Ranjith Lohithakshan <ranjithl@xxxxxx>
• RE: [PATCH 1/4] omap: mailbox cleanup: convert rwlocks to spinlock
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Ranjith Lohithakshan <ranjithl@xxxxxx>
• RE: [PATCH] OMAP3: PM: Registering sgx device and it's platform data
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] DSPBRIDGE: MMU-Fault debugging enhancements
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH/RFC v3] MFD: TWL4030: changes for TRITON Errata 27 workaround
  • From: Lesly A M <leslyam@xxxxxx>
• [PATCH v2] omap4: Move SOC specific code from board file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Benoit Cousson <b-cousson@xxxxxx>
• RE: [PATCHv3 1/3] TCA6416 keypad : Implement keypad driver for keys interfaced to TCA6416
  • From: "Govindarajan, Sriramakrishnan" <srk@xxxxxx>
• Re: [PATCH 00/21] OMAP: DSS2: Taal panel driver updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC] [PATCH 1/2] CMA3000 Accelerometer Driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [PATCHv3 1/2] OMAP3: PM: Smartreflex IP update changes for OMAP3630
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP:GPIO:hwmod: Fix mmc compile errors
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/5] omap3: pm: Use generic TRITON power scripts for 3430SDP board
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/5] omap3: pm: Using separate clk/volt setup_time for RET and OFF states
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Fix compilation error observed when cpufreq is disabled
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Vladimir Pantelic <pan@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Disable the non working eMMC on Zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] Disable the non working eMMC on Zoom2/3
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH] Disable the non working eMMC on Zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] OMAP3: PM: Add milliseconds interface to suspend wakeup timer
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• ARM suspend to disk?
  • From: Peter Tseng <tsenpet09@xxxxxxxxx>
• RE: Unable to build for omap3_evm_defconfig using latest kernel-omap3 git
  • From: Rick Ball <rball@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Vladimir Pantelic <pan@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: "Uribe de Leon, Armando" <x0095078@xxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 1/2] omap: gpmc: add gpmc_cs_get_timings
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 0/2] omap: gpmc-nand: add ability to keep timings defined by the bootloader
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• RE: Unable to build for omap3_evm_defconfig using latest kernel-omap3 git
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: Bug in omap2_nand_gpmc_retime?
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Unable to build for omap3_evm_defconfig using latest kernel-omap3 git
  • From: Rick Ball <rball@xxxxxxxxxxxxx>
• Re: Bug in omap2_nand_gpmc_retime? (was: Re: [PATCH] OMAP: fix gpmc nand setup when no timings supplied)
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH v2 09/19] DSPBRIDGE: function to get the type of clock requested by dsp
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 03/19] DSPBRIDGE: Now actually fail if a clk handle is wrong
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 00/19] DSPBRIDGE: generic clk module removal
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 04/19] DSPBRIDGE: Rename services_clk_* to dsp_clk_*
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 15/19] DSPBRIDGE: use one call for both ick and fck clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 05/19] DSPBRIDGE: remove unused clock sys_ck
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 12/19] DSPBRIDGE: use omap mcbsp to enable mcbsp clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 13/19] DSPBRIDGE: remove wdt3 from dsp control
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 11/19] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 16/19] DSPBRIDGE: Move MCBSP_CLOCKS code to a common place
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 18/19] DSPBRIDGE: move clk to dsp-clock
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 14/19] DSPBRIDGE: dsp interface to enable ssi clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 19/19] DSPBRIDGE: reorganize the code to handle peripheral clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 10/19] DSPBRIDGE: iva2 clock handling
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 17/19] DSPBRIDGE: Balance the number of enable/disable
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 01/19] DSPBRIDGE: remove clk_handle from drv interface
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 08/19] DSPBRIDGE: trivial clock cleanup for unused code
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 07/19] DSPBRIDGE: remove clk_get_use_cnt
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 02/19] DSPBRIDGE: fail if clk handle is NULL
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 06/19] DSPBRIDGE: remove function clk_set32k_hz
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Bug in omap2_nand_gpmc_retime? (was: Re: [PATCH] OMAP: fix gpmc nand setup when no timings supplied)
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH] OMAP3: I2C: Clean up Errata 1p153 handling
  • From: Manjunatha GK <manjugk@xxxxxx>
• RE: omap_musb_board_data -- trouble specifying 500mA supply
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: omap_musb_board_data -- trouble specifying 500mA supply
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH] OMAP3630: Update ES1.1 silicon revision detection
  • From: Manjunatha GK <manjugk@xxxxxx>
• [PATCH 2/2] crypto: omap-sham - omap sha1 & md5 driver
  • From: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx>
• [PATCHv4 0/2] omap-sham: OMAP SHA1/MD5 driver
  • From: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx>
• [PATCH 1/2] crypto: updates omap sham device related platform code
  • From: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx>
• Re: [PATCH v6] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• omap_musb_board_data -- trouble specifying 500mA supply
  • From: Cliff Brake <cliff.brake@xxxxxxxxx>
• Re: [PATCH v2] generic clk module removal
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [RFC][PATCH] [I2C]pass scll, sclh through board file for Errata i585
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [RFC][PATCH] [I2C]pass scll, sclh through board file for Errata i585
  • From: "Krishnamoorthy, Balaji T" <balajitk@xxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 1/4] omap: mailbox cleanup: convert rwlocks to spinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v6] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH v6] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v6] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Ranjith Lohithakshan <ranjithl@xxxxxx>
• Re: [PATCH 1/4] omap: mailbox cleanup: convert rwlocks to spinlock
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCHv3 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv3 3/4] mach-omap1: Add SoC info data for OMAP1 into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv3 0/4] Adding soc related info into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv3 2/4] mach-omap2: Add SoC info data for OMAP2,3,4 into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv3 1/4] ARM: Introduce SoC Info into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH v6] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: Manjunatha GK <manjugk@xxxxxx>
• Re: [PATCHv2 2/4] mach-omap2: Add SoC info data for OMAP2,3,4 into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• RE: [PATCH v5] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [RESUBMIT] [PATCH v4 0.1/5(7)] OMAP: add missing FIQ_START definition required for arch/arm/kernel/fiq.c compilation
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2] generic clk module removal
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• [PATCH v2] DSPBRIDGE: function to get the type of clock requested by dsp
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: reorganize the code to handle peripheral clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: remove wdt3 from dsp control
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: remove clk_get_use_cnt
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: iva2 clock handling
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: move clk to dsp-clock
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: use dm timer framework for gpt timers
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: Balance the number of enable/disable
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: trivial clock cleanup for unused code
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: use one call for both ick and fck clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: use omap mcbsp to enable mcbsp clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: Move MCBSP_CLOCKS code to a common place
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: dsp interface to enable ssi clocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: remove function clk_set32k_hz
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: Now actually fail if a clk handle is wrong
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: remove unused clock sys_ck
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] generic clk module removal
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: Rename services_clk_* to dsp_clk_*
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: fail if clk handle is NULL
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2] DSPBRIDGE: remove clk_handle from drv interface
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v4 5/5(7)] OMAP1: Amstrad Delta: modify defconfig for external keyboard support
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v4 4/5(7)] input: serio: add support for Amstrad Delta serial keyboard port
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v4 3/5(7)] OMAP1: Amstrad Delta: use FIQ for processing GPIO interrupts
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v4 2.1/5(7)] OMAP1: Amstrad Delta: update board initialization code for complete modem IRQ GPIO line setup
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v4 2/5(7)] OMAP1: Amstrad Delta: add a handler for processing interrupts generated by the FIQ routine
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 01/13] DSPBRIDGE: Replace mem_calloc() by kzalloc() or __vmalloc()
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v4 1/5(7)] OMAP1: Amstrad Delta: add FIQ handler for serial keyboard port interrupt processing
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v4 0.1/5(7)] OMAP: add missing FIQ_START definition required for arch/arm/kernel/fiq.c compilation
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v4 0/5(7)] OMAP1: Amstrad Delta: add FIQ based support for external keyboard
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 5/5] DSPBRIDGE: Remove Reg module
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH 4/5] DSPBRIDGE: Remove handles from registry
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH 3/5] DSPBRIDGE: Remove DSP resources from registry
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH 2/5] DSPBRIDGE: Remove host resources from registry
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH 1/5] DSPBRIDGE: Remove DSP resources from registry
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• RE: [PATCH] arm: Fix .gitignore for boot/compressed folder
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [PATCHv3 00/22] OMAP3: PM: Smartreflex and voltage revamp
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 20/22] OMAP3: PM: VP force update method of voltage scaling
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 18/22] OMAP3: PM: Optional reset of voltage during Smartreflex disable.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 17/22] OMAP3: PM: Implement latest h/w recommendations for SR and VP registers and SR VP enable disable sequence.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 15/22] OMAP3: PM: Support for enabling smartreflex autocompensation by default.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 14/22] OMAP3: PM: Configurations for Smartreflex Class 2 and Smartreflex Class 3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 12/22] OMAP3: PM: Minimizing the passing around of sr id in smartreflex.c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 10/22] OMAP3: PM: Adding voltage table support in voltage driver.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 05/22] OMAP3: PM: Remove OPP id dependency from smartreflex driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Disable the non working eMMC on Zoom2/3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] omap: mailbox: convert block api to kfifo
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 3/4] omap: mailbox: fix reverse likeliness
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 2/4] omap: mailbox cleanup: split MODULE_AUTHOR line
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 1/4] omap: mailbox cleanup: convert rwlocks to spinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 0/4] omap: mailbox: cleanup & simplify
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCHv3 04/22] OMAP3: PM: Move smartreflex autocompensation enable disable hooks to PM debugfs.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 03/22] OMAP3: PM: Convert smartreflex driver into a platform driver using hwmods and omap-device layer
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 01/22] OMAP3: PM: Adding hwmod data for Smartreflex
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap fixes for v2.6.34-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: PRCM interrupt: only check for enabled PRCM IRQs
  • From: Mike Turquette <mturquette@xxxxxx>
• Re: [GIT PULL] omap fixes for v2.6.34-rc5
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 20/22] OMAP3: PM: VP force update method of voltage scaling
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap fixes for v2.6.34-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap fixes for v2.6.34-rc5
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: DSS: ensure clocks are disabled on failed init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PRCM interrupt: only check for enabled PRCM IRQs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 2/4] mach-omap2: Add SoC info data for OMAP2,3,4 into /proc/cpuinfo
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH v5] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: fix gpmc nand setup when no timings supplied
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v5] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  • From: Manjunatha GK <manjugk@xxxxxx>
• RE: [PM][PATCH v3 2/4] OMAP3: Serial: Errata i202: fix for MDR1 access
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Msleep doesn't return!
  • From: "Douglass, Woody" <Woodrow.Douglass@xxxxxxxxxxxxxx>
• [PATCHv2 1/4] ARM: Introduce SoC Info into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv2 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv2 3/4] mach-omap1: Add SoC info data for OMAP1 into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv2 2/4] mach-omap2: Add SoC info data for OMAP2,3,4 into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCHv2 0/4] Adding soc related info into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• RE: [PATCH] ARM:iommu support for OMAP4
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• [PATCH] OMAP3EVM: Update pad configuration for wakeup enabled pads
  • From: Ranjith Lohithakshan <ranjithl@xxxxxx>
• Re: [PATCH v9] board-omap3-beagle: add DSS2 support
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP: DSS: ensure clocks are disabled on failed init
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: OMAP3: Linux Without a Boot Loader?
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: [PATCH 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH] OMAP: DSS: ensure clocks are disabled on failed init
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v9] board-omap3-beagle: add DSS2 support
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: fix gpmc nand setup when no timings supplied
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 1/1] omap iommu: introduce iteration macro for iotlb entry scan
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] OMAP: fix gpmc nand setup when no timings supplied
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: OMAP3: Linux Without a Boot Loader?
  • From: Greg Ungerer <gerg@xxxxxxxxxxxx>
• Re: OMAP3: Linux Without a Boot Loader?
  • From: Greg Ungerer <gerg@xxxxxxxxxxxx>
• Re: OMAP3: Linux Without a Boot Loader?
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: [PATCH] OMAP3: PRCM interrupt: only check for enabled PRCM IRQs
  • From: Mike Turquette <mturquette@xxxxxx>
• Re: [PATCH] OMAP3: PRCM interrupt: only check for enabled PRCM IRQs
  • From: Mike Turquette <mturquette@xxxxxx>
• Re: OMAP3: Linux Without a Boot Loader?
  • From: Juha Kuikka <juha.kuikka@xxxxxxxxx>
• [APPLIED] [PATCH v2 1/2] omap i2c: make errata 1.153 workaround a separate
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c-omap: add mpu wake up latency constraint in i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c-omap: add mpu wake up latency constraint in i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• OMAP3: Linux Without a Boot Loader?
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/1] i2c-omap: add mpu wake up latency constraint in i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c-omap: add mpu wake up latency constraint in i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c-omap: add mpu wake up latency constraint in i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC][PATCH] [I2C]pass scll, sclh through board file for Errata i585
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3: PRCM interrupt: only check for enabled PRCM IRQs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] omap_hsmmc: improve interrupt synchronisation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 4/4][v4] OMAP:iommu- add TLB preservation support
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• [PATCH] OMAP: DSS: ensure clocks are disabled on failed init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Fix tusb6010 for DMA API (Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2))
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: Fix tusb6010 for DMA API (Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2))
  • From: Greg KH <greg@xxxxxxxxx>
• [GIT PULL] omap fixes for v2.6.34-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: CLK: FIX: warning SR fclk clk domain not found
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5(7)] OMAP1: Amstrad Delta: add a handler for processing interrupts generated by the FIQ routine
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: fix gpmc nand setup when no timings supplied
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] OMAP1 clock: fix section mismatch on clk_init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Fix zoom3 defconfig build
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Fix tusb6010 for DMA API (Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2))
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 2/2 V6] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: new PM branch: OPP layer included
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] omap_hsmmc: improve interrupt synchronisation
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH] OMAP3: PM: Fix zoom3 defconfig build
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 2/2 V6] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v2] dma: fix scope of errata i88 upto 3430ES1.0
  • From: Venkatraman S <svenkatr@xxxxxx>
• Re: [PATCH 2/2 V6] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH V2] OMAP3630:DSS2: Updating MAX divider value
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH V2] OMAP3630:DSS2: Updating MAX divider value
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• RE: [PATCH 2/2 V6] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• RE: [PATCH 2/2 V6] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH 2/2 V6] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH 1/2 V6] OMAP: DSS: Add display board file for zoom boards
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH 0/2 V6] Enable DSS on zoom2/3 and 3630 sdp boards
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• RE: new PM branch: OPP layer included
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH] OMAP3: PM: Fix zoom3 defconfig build
  • From: Manjunatha GK <manjugk@xxxxxx>
• RE: [RFC PATCH 0/5] HSI framework and drivers
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [PATCH v2] omap_hsmmc: improve interrupt synchronisation
  • From: Venkatraman S <svenkatr@xxxxxx>
• RE: [PATCH 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH 3/4] mach-omap1: Add SoC info data for OMAP into /proc/cpuinfo1
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH 2/4] mach-omap2: Add SoC info data for OMAP2,3,4 into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH 4/4] OMAP3: PM: export chip IDCODE, Production ID and Die ID
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH 1/4] ARM: Introduce SoC Info into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH 0/4] Adding soc related info into /proc/cpuinfo
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• RE: [PATCH 1/2 V5] OMAP: DSS: Add display board file for zoom boards
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• RE: [PATCH 2/2 V4] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• Re: [PATCH] OMAP: omap_device: add omap_device_has_lost_context()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/10] OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 04/10] OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/10] OMAP3: PM: PM_MPUGRPSEL writes should use GRPSEL macros, not EN macros
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/10] OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/10] OMAP2+ clock: remove DEFAULT_RATE clksel_rate flag
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/10] OMAP2+ clock: clean up clkt_clksel.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/10] OMAP3 clock: remove unnecessary duplicate of dpll4_m2_ck, added for 36xx
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 10/10] OMAP clock: resolve old checkpatch and CodingStyle issues with plat-omap/clock.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/10] OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/10] OMAP1 clock: fix section mismatch on clk_init
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/10] OMAP PRCM, clock: some cleanup patches for 2.6.35
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 0/3] usb: ohci: introduce ohci-hcd driver for omap3
  • From: Gregory CLEMENT <gclement00@xxxxxxxxx>
• RE: [PATCH v3 0/3] usb: ohci: introduce ohci-hcd driver for omap3
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH v3 0/3] usb: ohci: introduce ohci-hcd driver for omap3
  • From: Gregory CLEMENT <gclement00@xxxxxxxxx>
• Re: [RFC PATCH 00/37] cbus patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH v3 1/3] omap3: add platform init code for OHCI driver
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH v3 2/3] usb: ohci: introduce omap3 ohci-hcd driver
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH v3 3/3] usb: ohci: Add Kconfig entries for ohci-omap3
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH v3 0/3] usb: ohci: introduce ohci-hcd driver for omap3
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH] usb: Fix tusb6010 for DMA API (Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2))
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH] OMAP3630:DSS: Updating MAX divider value
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 2/2 V4] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 1/2 V5] OMAP: DSS: Add display board file for zoom boards
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] usb: Fix tusb6010 for DMA API (Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2))
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] OMAP3630:DSS: Updating MAX divider value
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH] OMAP:DSS: Add missing line for update bg color
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH V2] OMAP3630:DSS2:Enable Pre-Multiplied Alpha Support
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH 2/2 V4] OMAP: DSS: Enable display on ZOOM2/3 & 3630SDP
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH 1/2 V5] OMAP: DSS: Add display board file for zoom boards
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH 0/2 V5] Enable DSS on zoom2/3 and 3630 sdp boards
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• [PATCH V5] OMAP: DSS: Add NEC NL8048HL11-01B display panel
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• Re: [PATCH 4/4][v4] OMAP:iommu- add TLB preservation support
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [RFC PATCH 00/37] cbus patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 4/4][v4] OMAP:iommu- add TLB preservation support
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• new PM branch: OPP layer included
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 28/28] omap: delete unused bootloader tag variables
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 27/28] omap: Devkit8000: Remove unused pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 26/28] omap: Devkit8000: Change position of init calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 25/28] omap: Devkit8000: Remove unnecessary include file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 24/28] omap: Devkit8000: Fix typo in pin name
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 23/28] omap: Devkit8000: Add missing package selection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 22/28] omap: Devkit8000: Fix typo in supplies
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 21/28] n8x0_defconfig: remove CONFIG_NILFS2_FS override
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 20/28] omap: board-sdp-flash.c: Fix typos in debug output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 19/28] omap4: Fix McBSP4 base address
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 18/28] omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/28] omap: rx51_defconfig: Remove duplicate phonet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/28] omap: fix a gpmc nand problem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/28] AM3517: initialize i2c subsystem after mux subsystem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/28] omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/28] omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/28] OMAP4: Clocks: Change SPI Instance Names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/28] omap: Devkit8000: Fix wrong usb port on Devkit8000
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/28] OMAP4: Fix for CONTROL register Base
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/28] omap3: Fix EHCI port for IGEP v2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/28] OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/28] omap: Fix n8x0 mmc_mmc_init compile warnings and typos
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/28] omap2: Fix ARM processor check for 24xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/28] omap4: Fix build break when used with gcc-4.4.1 (2009-q3)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/28] omap: DMA: Init CDAC to zero
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/28] omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTH
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/28] omap: fix clocksource_32k to start from zero
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/28] arm: omap1: remove dead code from timer32k.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/28] omap fixes for v2.6.34-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: Fix tusb6010 for DMA API (Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2))
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] usb: Fix tusb6010 for DMA API (Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2))
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch-2.6.34-rc2+ 00/11] musb patches (v2)
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [RFC PATCH 0/5] HSI framework and drivers
  • From: <Kai.Vehmanen@xxxxxxxxx>
• Re: [RFC PATCH 1/5] HSI: Introducing HSI framework
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• RE: [PATCH v4 1/1] Registering sgx device and it's platform data
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [RFC PATCH 0/5] HSI framework and drivers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 1/1] Registering sgx device and it's platform data
  • From: Paul Walmsley <paul@xxxxxxxxx>