Upcoming change to tlv320aic3x codec driver require four supplies. Implement this by connecting analogic supplies to TWL4030 VMMC2 and digital supplies to TWL4030 VIO. Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx> Cc: Eduardo Valentin <eduardo.valentin@xxxxxxxxx> --- Analogic supplies were able to find from Maemo kernel sources and earlier patch from Eduardo: http://marc.info/?l=linux-omap&m=125500331032616&w=2 I made an educated guess that digital codec supplies are connected to 1.8 V IO voltage and it is derived from TWL4030 VIO (like in BeagleBoard). --- arch/arm/mach-omap2/board-rx51-peripherals.c | 60 +++++++++++++++++++++++--- 1 files changed, 53 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 3addfe6..8179d55 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -277,7 +277,7 @@ static struct regulator_consumer_supply rx51_vmmc1_supply = { .dev_name = "mmci-omap-hs.0", }; -static struct regulator_consumer_supply rx51_vmmc2_supply = { +static struct regulator_consumer_supply rx51_vaux3_supply = { .supply = "vmmc", .dev_name = "mmci-omap-hs.1", }; @@ -287,6 +287,35 @@ static struct regulator_consumer_supply rx51_vsim_supply = { .dev_name = "mmci-omap-hs.1", }; +static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { + /* tlv320aic3x analog supplies */ + { + .supply = "AVDD", + .dev_name = "2-0018", + }, + { + .supply = "DRVDD", + .dev_name = "2-0018", + }, + /* Keep vmmc as last item. It is not iterated for newer boards */ + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.1", + }, +}; + +static struct regulator_consumer_supply rx51_vio_supplies[] = { + /* tlv320aic3x digital supplies */ + { + .supply = "IOVDD", + .dev_name = "2-0018" + }, + { + .supply = "DVDD", + .dev_name = "2-0018" + }, +}; + static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -338,7 +367,7 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .consumer_supplies = &rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -380,8 +409,8 @@ static struct regulator_init_data rx51_vmmc2 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), + .consumer_supplies = rx51_vmmc2_supplies, }; static struct regulator_init_data rx51_vsim = { @@ -411,6 +440,20 @@ static struct regulator_init_data rx51_vdac = { }, }; +static struct regulator_init_data rx51_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), + .consumer_supplies = rx51_vio_supplies, +}; + static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ @@ -618,6 +661,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vmmc1 = &rx51_vmmc1, .vsim = &rx51_vsim, .vdac = &rx51_vdac, + .vio = &rx51_vio, }; static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { @@ -638,12 +682,14 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || - system_rev >= SYSTEM_REV_B_USES_VAUX3) + system_rev >= SYSTEM_REV_B_USES_VAUX3) { rx51_twldata.vaux3 = &rx51_vaux3_mmc; - else { + /* Only older boards use VMMC2 for internal MMC */ + rx51_vmmc2.num_consumer_supplies--; + } else { rx51_twldata.vaux3 = &rx51_vaux3_cam; - rx51_twldata.vmmc2 = &rx51_vmmc2; } + rx51_twldata.vmmc2 = &rx51_vmmc2; omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, -- 1.7.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
