This series of patches adds support for an external keyboard (called mailboard) connected to the Amstrad Delta (E3) videophone. The series is based on a patch by Matt Callow, created against linux-omap-2.6.19[1], initially submitted to the e3-hacking mailing list in April 2006[2]. Since the keyboard serial clock line is connected to a GPIO input, it generates interrupts every single bit received. In order to handle this correctly, the code makes use of a FIQ hardware feature. Since all GPIO generated interrupts would be converted to FIQ, the handler must include support for all supported GPIO connected devices: the keyboard, a modem and a hook switch. My initial modifications to the original patch included: - split into several patches, - refresh against a recent linux version, - a lot of cleanups, mainly to get rid of checkpatch reported issues, - add support for handling interrupts generated by a GPIO line that the meanwhile activated hook switch hangs off. v2 changes: - remove scan code to key code mapping from the serio driver, that doesn't belong here and should be set up from userspace; thanks to Dmitry Torokhov for advising this[3], - no funtional changes in FIQ part (there were no comments in round 1). v3 changes: - cleanups suggested by Dmitry[4] (applied not only to serio bits), - assembly code optimizations suggested by Ralph Corderoy[5], - (re)use existing header file provided macros where applicable instead of defining new; remove a lot of unnecessary defines, - extract missing FIQ_START definition fix into an extra patch number 0.1/5(7), - modify both fiq and deferred_fiq handlers to follow default OMAP GPIO interrupt processing path more closely, - update board initialization code for complete modem IRQ GPIO line setup; this appeared essential for correct interaction with optimized FIQ handler; the change is provided as a separate patch number 2.1/5(7), - use IRQ12 (reserved on OMAP1510) for requesting deferred_fiq handler instead of TIMER32k dedicated IRQ, - more optimizations in both assembly and C code, - modify serio Kconfig for automatic AT keyboard and FIQ handler selection, - drop intermediate defconfig changes. v4 changes: - changes requested by Dmitry for his Ack to be valid[6], - correct a few occurrences of 2nd argumet missing in 3-argument assembly instruction, thanks to Ralph Corderoy for pointing them out, - remove commented out code for interrupt active edge toggling, but keep the updated comment that justifies the removal. Created and tested against linux-omap master, commit 104a77440f05430f29f9d3f4ecb88c1536819585 dated 2010-04-27. Compile tested with a bunch of OMAP15XX/OMAP16XX boards selected simultaneously, as requested by Tony[7]. Janusz Krzysztofik(7) OMAP: add missing FIQ_START definition required for arch/arm/kernel/fiq.c compilation OMAP1: Amstrad Delta: add FIQ handler for serial keyboard port interrupt processing OMAP1: Amstrad Delta: add a handler for processing interrupts generated by the FIQ routine OMAP1: Amstrad Delta: update board initialization code for complete modem IRQ GPIO line setup OMAP1: Amstrad Delta: use FIQ for processing GPIO interrupts input: serio: add support for Amstrad Delta serial keyboard port OMAP1: Amstrad Delta: modify defconfig for external keyboard support arch/arm/configs/ams_delta_defconfig | 1 arch/arm/mach-omap1/Kconfig | 10 arch/arm/mach-omap1/Makefile | 3 arch/arm/mach-omap1/ams-delta-fiq-handler.S | 278 +++++++++++++++++++++++ arch/arm/mach-omap1/ams-delta-fiq.c | 155 ++++++++++++ arch/arm/mach-omap1/board-ams-delta.c | 18 + arch/arm/mach-omap1/include/mach/ams-delta-fiq.h | 79 ++++++ arch/arm/plat-omap/include/plat/irqs.h | 4 drivers/input/serio/Kconfig | 16 + drivers/input/serio/Makefile | 1 drivers/input/serio/ams_delta_serio.c | 177 ++++++++++++++ 11 files changed, 740 insertions(+), 2 deletions(-) Thanks, Janusz [1] http://the.earth.li/pub/e3/2.6.19/ams-delta-keyboard.patch [2] http://www.earth.li/pipermail/e3-hacking/2006-April/000453.html [3] http://www.spinics.net/lists/linux-input/msg07690.html [4] http://www.spinics.net/lists/linux-input/msg07762.html [5] http://www.spinics.net/lists/linux-omap/msg27373.html [6] http://www.spinics.net/lists/linux-input/msg08093.html [7] http://www.spinics.net/lists/linux-omap/msg28535.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
