Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH v3 1/3] AM35x: voltage: Basic initialization
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v3 3/3] OMAP3: Remove auto-selection of PMICs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] OMAP3: Remove auto-selection of PMICs
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2] AM3517 : support for suspend/resume
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 01/10] cpufreq: OMAP: cleanup for multi-SoC support, move into drivers/cpufreq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] OMAP2+: clock: cleanup CPUfreq leftovers
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 04/10] cpufreq: OMAP: notify even with bad boot frequency
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 10/10] cpufreq: OMAP: fix freq_table leak
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 09/10] cpufreq: OMAP: put clk if cpu_init failed
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 08/10] cpufreq: OMAP: only supports OPP library
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 07/10] cpufreq: OMAP: dont support !freq_table
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 06/10] cpufreq: OMAP: deny initialization if no mpudev
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 02/10] cpufreq: OMAP: Add SMP support for OMAP4+
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 05/10] cpufreq: OMAP: move clk name decision to init
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 03/10] cpufreq: OMAP: Enable all CPUs in shared policy mask
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 01/10] cpufreq: OMAP: cleanup for multi-SoC support, move into drivers/cpufreq
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 00/10] cpufreq: OMAP: move into drivers, cleanups/fixes for v3.2
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 0/2] OMAP: omap_device: Add a method to build an omap_device from a DT node
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v7 00/26] gpio/omap: driver cleanup and fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5 v11] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v4 1/3] AM35x: Using OMAP3 generic hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5 v11] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/5 v11] arm: omap: usb: ehci and ohci hwmod structures for omap3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] hwmon: OMAP4460+: On die temperature sensor driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] hwmon: OMAP4460+: On die temperature sensor driver
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• [PATCH] mfd: OMAP4460+: System control module driver
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [GIT PULL] OMAP: omap_device cleanup for v3.2
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 3/6] OMAP4460: Temperature sensor data
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 6/6] OMAP4460: Clock: Adding support for 4460 specific clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 4/6] OMAP4: Hwmod: system control module hwmod
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 5/6] OMAP4: System control module device support
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/6] OMAP4: Adding the temperature sensor register set bit fields
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 2/6] OMAP4: Clock: Associate clocks for OMAP temperature sensor
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/6] system control module device and support for temperature sensor
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v7 00/26] gpio/omap: driver cleanup and fixes
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: linux-omap git tree ?
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: linux-omap git tree ?
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 37/57] mmc: irq: Remove IRQF_DISABLED
  • From: "Kadiyala, Kishore" <kishore.kadiyala@xxxxxx>
• linux-omap git tree ?
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] iommu/omap: Fix build error with !IOMMU_SUPPORT
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 0/5 v11] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 0/5 v11] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v3 3/3] OMAP3: Remove auto-selection of PMICs
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• [PATCH v3 2/3] OMAP3: Add support for TPS65023 (AM35x only)
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• [PATCH v3 0/3] AM35x: Adding PM init
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• [PATCH v3 1/3] AM35x: voltage: Basic initialization
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• [PATCH v4 0/3] AM3517: Booting up
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• [PATCH v4 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• [PATCH v4 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• [PATCH v4 1/3] AM35x: Using OMAP3 generic hwmods
  • From: Abhilash K V <abhilash.kv@xxxxxx>
• Re: [PATCH v2 5/5] OMAPDSS: HDMI: Add support to dump clocks through
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/5 v11] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 3/5 v11] arm: omap: usb: register hwmods of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 5/5 v11] mfd: omap: usb: Runtime PM support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 4/5 v11] arm: omap: usb: device name change for the clk names of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 2/5 v11] arm: omap: usb: ehci and ohci hwmod structures for omap3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 1/5 v11] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/5 v11] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 2/3] OMAPDSS: HDMI: Add support to configure quantization
  • From: <mythripk@xxxxxx>
• [PATCH 3/3] OMAPDSS: HDMI: Add sysfs support to configure
  • From: <mythripk@xxxxxx>
• [PATCH 1/3] OMAPDSS: HDMI: Move Avi infoframe structure to
  • From: <mythripk@xxxxxx>
• [PATCH 37/55] mmc: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 49/55] video: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [RFC PATCH V6 4/4] cpuidle: Single/Global registration of idle states
  • From: Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V6 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
  • From: Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V6 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
  • From: Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V6 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
  • From: Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics
  • From: Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] OMAPDSS: HDMI: Add support to dump clocks through
  • From: <mythripk@xxxxxx>
• [PATCH v2 4/5] OMAPDSS: HDMI: Add support to dump registers through
  • From: <mythripk@xxxxxx>
• [PATCH v2 1/5] OMAPDSS: HDMI: Move the comments in avi infoframe
  • From: <mythripk@xxxxxx>
• [PATCH v2 2/5] OMAPDSS: HDMI: Replace hdmi_reg struct with u16
  • From: <mythripk@xxxxxx>
• [PATCH v2 3/5] OMAPDSS: HDMI: Add missing register definitions
  • From: <mythripk@xxxxxx>
• [PATCH 0/5] OMAPDSS: HDMI: Debug support and Register cleanup
  • From: <mythripk@xxxxxx>
• Re: [PATCH v5 09/15] OMAP2+: UART: Add runtime pm support for omap-serial driver
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v5 09/15] OMAP2+: UART: Add runtime pm support for omap-serial driver
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v16 09/12] OMAP: dmtimer: low-power mode support
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 3/5] [media]: OMAP_VOUT: Fix VSYNC IRQ handling in omap_vout_isr
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v16 08/12] OMAP: dmtimer: do remaining initialization in probe
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v16 10/12] OMAP: dmtimer: extend spinlock in request functions
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v16 01/12] OMAP2+: dmtimer: add device names to flck nodes
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v16 05/12] OMAP: dmtimer: switch-over to platform device driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v16 07/12] OMAP: dmtimer: add timeout to low-level routines
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v16 05/12] OMAP: dmtimer: switch-over to platform device driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v16 07/12] OMAP: dmtimer: add timeout to low-level routines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v16 01/12] OMAP2+: dmtimer: add device names to flck nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v16 12/12] OMAP: dmtimer: get rid of timer_ip_version field
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v16 09/12] OMAP: dmtimer: low-power mode support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v16 08/12] OMAP: dmtimer: do remaining initialization in probe
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v16 10/12] OMAP: dmtimer: extend spinlock in request functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2 3/3] TI814X: Create board support and enable build for TI8148 EVM
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• RE: [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [GIT PULL] OMAP: omap_device cleanup for v3.2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Staging tree for AM335x platforms
  • From: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 3/3] TI814X: Create board support and enable build for TI8148 EVM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Staging tree for AM335x platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 49/57] video: irq: Remove IRQF_DISABLED
  • From: David Brown <davidb@xxxxxxxxxxxxxx>
• Re: [GIT PULL] OMAP: omap_device cleanup for v3.2
  • From: Kevin Hilman <khilman@xxxxxx>
• Staging tree for AM335x platforms
  • From: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] TI814X: Create board support and enable build for TI8148 EVM
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v2 2/3] TI814X: Add cpu type macros and detection support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v2 0/3] Add support for TI814X processor series
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 0/8] PM QoS: implement the OMAP low level constraints management code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 8/8] OMAP3: powerdomain data: add wake-up latency figures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 4/8] OMAP2+: omap_hwmod: manage the wake-up latency constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 7/8] OMAP3: update cpuidle latency and threshold figures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 6/8] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/8] OMAP: PM: register to the per-device PM QoS framework
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/8] OMAP2+: powerdomain: control power domains next state
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/8] OMAP: PM: remove the latency related functions from the API
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/8] OMAP: convert I2C driver to PM QoS for latency constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH v2 0/8] PM QoS: implement the OMAP low level constraints management code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/8] OMAP: PM: register to the per-device PM QoS framework
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 6/8] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 1/8] OMAP: convert I2C driver to PM QoS for latency constraints
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 2/8] OMAP: PM: remove the latency related functions from the API
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH v2 0/8] PM QoS: implement the OMAP low level constraints management code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 8/8] OMAP3: powerdomain data: add wake-up latency figures
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 7/8] OMAP3: update cpuidle latency and threshold figures
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 4/8] OMAP2+: omap_hwmod: manage the wake-up latency constraints
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 3/8] OMAP2+: powerdomain: control power domains next state
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/10] hwspinlock/core/omap: fix id issues on multiple hwspinlock devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 26/26] gpio/omap: add dbclk aliases for all gpio modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 16/26] gpio/omap: fix bankwidth for OMAP7xx MPUIO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 15/26] gpio/omap: remove bank->method & METHOD_* macros
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 13/26] gpio/omap: use pinctrl offset instead of macro
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ASoC: tpa6130a2: model handling cleanup
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v7 13/26] gpio/omap: use pinctrl offset instead of macro
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 12/26] gpio/omap: cleanup omap_gpio_mod_init function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 11/26] gpio/omap: cleanup set_gpio_triggering function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 10/26] gpio/omap: remove hardcoded offsets in context save/restore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 09/26] gpio/omap: use level/edge detect reg offsets
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 08/26] gpio/omap: further cleanup using wkup_en register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 07/26] gpio/omap: avoid cpu checks during module ena/disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 06/26] gpio/omap: make non-wakeup GPIO part of pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 05/26] gpio/omap: handle save/restore context in GPIO driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 04/26] gpio/omap: fix pwrdm_post_transition call sequence
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 01/26] gpio/omap: remove dependency on gpio_bank_count
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 3/5] [media]: OMAP_VOUT: Fix VSYNC IRQ handling in omap_vout_isr
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH v5 12/15] OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 13/15] OMAP2+: UART: Take console_lock in suspend path if not taken
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 15/15] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 14/15] OMAP2+: UART: Enable back uart clocks with runtime API for early console
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 10/15] OMAP2+: UART: Move errata handling from serial.c to omap-serial
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 11/15] OMAP2+: UART: Allow UART parameters to be configured from board file.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 09/15] OMAP2+: UART: Add runtime pm support for omap-serial driver
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 06/15] OMAP2+: UART: Remove certain feilds from omap_uart_state struct
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 07/15] OMAP2+: UART: Add default mux for all uarts.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 08/15] OMAP2+: UART: Store certain reg values to port structure
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 04/15] OMAP2+: UART: cleanup 8250 console driver support
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 05/15] OMAP2+: UART: Cleanup part of clock gating mechanism for uart
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 03/15] OMAP2+: UART: cleanup + remove uart pm specific API
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 02/15] OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 01/15] OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 00/15] OMAP2+: Serial: Runtime adaptation + cleanup
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH 1/5] [media]: OMAP_VOUT: Fix check in reqbuf & mmap for buf_size allocation
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 2/5] [media]: OMAP_VOUT: CLEANUP: Remove redundant code from omap_vout_isr
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 37/57] mmc: irq: Remove IRQF_DISABLED
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH 2/5] [media]: OMAP_VOUT: CLEANUP: Remove redundant code from omap_vout_isr
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 37/57] mmc: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 49/57] video: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCHv8 06/16] power: omap-prm: added chain interrupt handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv8 06/16] power: omap-prm: added chain interrupt handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 1/5] [media]: OMAP_VOUT: Fix check in reqbuf & mmap for buf_size allocation
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCHv8 01/16] power: add omap prm driver skeleton
  • From: Paul Walmsley <paul@xxxxxxxxx>
• omap3: I2C: failure in wakeup from S2R
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• RE: [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats
  • From: "Ravi, Deepthy" <deepthy.ravi@xxxxxx>
• Re: [PATCH 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix missing inline functions for Makefile cleanup (Re: [GIT PULL] omap cleanup part1 for v3.2 merge window)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap voltage cleanup for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap voltage cleanup for v3.2 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 5/5] OMAPDSS: HDMI: Add support to dump clocks through
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 5/5] OMAPDSS: HDMI: Add support to dump clocks through
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [PATCH 2/5] [media] v4l: Add mt9t111 sensor driver
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers
  • From: Deepthy Ravi <deepthy.ravi@xxxxxx>
• [PATCH 1/5] omap3evm: Enable regulators for camera interface
  • From: Deepthy Ravi <deepthy.ravi@xxxxxx>
• [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats
  • From: Deepthy Ravi <deepthy.ravi@xxxxxx>
• [PATCH 3/5] omap3evm: Add Camera board init/hookup file
  • From: Deepthy Ravi <deepthy.ravi@xxxxxx>
• [PATCH 0/5] OMAP3EVM: Add support for MT9T111 sensor
  • From: Deepthy Ravi <deepthy.ravi@xxxxxx>
• Re: [PATCH 1/5 v8] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 1/5 v9] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources
  • From: <hvaibhav@xxxxxx>
• [PATCH-V3 4/4] arm:omap:am33xx: Add low level debugging support
  • From: <hvaibhav@xxxxxx>
• [PATCH-V3 3/4] arm:omap:am33xx: Create board support and enable build for AM335XEVM
  • From: <hvaibhav@xxxxxx>
• [PATCH-V3 1/4] arm:omap:am33xx: Update common omap platform files
  • From: <hvaibhav@xxxxxx>
• [PATCH-V3 0/4] Introducing TI's New SoC/board AM335XEVM
  • From: <hvaibhav@xxxxxx>
• [PATCH 5/5 v10] mfd: omap: usb: Runtime PM support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 4/5 v10] arm: omap: usb: device name change for the clk names of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 2/5 v10] arm: omap: usb: ehci and ohci hwmod structures for omap3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 1/5 v10] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/5 v10] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 3/5 v10] arm: omap: usb: register hwmods of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init
  • From: Bjarne Steinsbo <bsteinsbo@xxxxxxxxx>
• Re: [PATCH 5/5] OMAPDSS: HDMI: Add support to dump clocks through
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/5] OMAPDSS: HDMI: Add support to dump registers through
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/5] OMAPDSS: HDMI: Add support to dump clocks through
  • From: <mythripk@xxxxxx>
• [PATCH 3/5] OMAPDSS: HDMI: Add missing register definitions
  • From: <mythripk@xxxxxx>
• [PATCH 2/5] OMAPDSS: HDMI: Replace hdmi_reg struct with u16
  • From: <mythripk@xxxxxx>
• [PATCH 4/5] OMAPDSS: HDMI: Add support to dump registers through
  • From: <mythripk@xxxxxx>
• [PATCH 1/5] OMAPDSS: HDMI: Move the comments in avi infoframe
  • From: <mythripk@xxxxxx>
• [PATCH 0/5] OMAPDSS: HDMI: Debug support and Register cleanup
  • From: <mythripk@xxxxxx>
• Re: [PATCH 03/10] OMAP: Devkit8000: Change lcd driver to AT070TN83
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 03/10] OMAP: Devkit8000: Change lcd driver to AT070TN83
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
  • From: Santosh <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
  • From: Santosh <santosh.shilimkar@xxxxxx>
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 08/12] OMAP: dmtimer: do remaining initialization in probe
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 12/12] OMAP: dmtimer: get rid of timer_ip_version field
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 05/12] OMAP: dmtimer: switch-over to platform device driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 11/12] OMAP: dmtimer: add error handling to export APIs
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 03/12] OMAP2+: dmtimer: convert to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 02/12] OMAP1: dmtimer: conversion to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 04/12] OMAP: dmtimer: platform driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 01/12] OMAP2+: dmtimer: add device names to flck nodes
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 07/12] OMAP: dmtimer: add timeout to low-level routines
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 06/12] OMAP: dmtimer: pm_runtime support
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v16 10/12] OMAP: dmtimer: extend spinlock in request functions
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• RE: [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH] iommu/omap: Fix build error with !IOMMU_SUPPORT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend
  • From: Santosh <santosh.shilimkar@xxxxxx>
• Re: [PATCH] iommu/omap: Fix build error with !IOMMU_SUPPORT
  • From: "Roedel, Joerg" <Joerg.Roedel@xxxxxxx>
• Re: [PATCH 00/10] hwspinlock-next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• [PATCH 10/10] OMAP4: 4430SDP: Add picodlp support to board file
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 09/10] OMAP4: 4430SDP: Add panel support to board file
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 08/10] OMAP: 4430SDP: Remove unneeded lcd config
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 07/10] OMAP: Add DDC i2c_bus_num to board files
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 06/10] OMAP: stalker: Remove LCD device from board file
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 05/10] OMAP: use dvi panel driver instead of generic-dpi
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 04/10] OMAP: DSS2: HDMI: use default dividers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 03/10] OMAP: Devkit8000: Change lcd driver to AT070TN83
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 02/10] OMAP4: TWL: Add common omapdss supplies
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 01/10] OMAP: DSS2: Change DSI device naming
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 00/10] OMAP DSS related board changes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• suspend/resume trouble on 2.6.39
  • From: Tasslehoff Kjappfot <tasskjapp@xxxxxxxxx>
• Re: [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] OMAPDSS: DISPC: VIDEO3 pipeline support
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v2 1/3] OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 0/5 v9] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv2 0/6] OMAP: DSS: porting old drivers to DSS2 (board files part)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5 v9] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/5 v8] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH v2 2/3] OMAPDSS: DISPC: VIDEO3 pipeline support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH v2 1/3] OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: martin@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 5/7] ARM: pm: get rid of cpu_resume_turn_mmu_on
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: pm: only use preallocated page table during resume
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 4/7] ARM: pm: no need to save/restore context ID register
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 6/7] ARM: pm: convert some assembly to C
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: pm: add L2 cache cleaning for suspend
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5 v9] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC PATCH 1/6] usb: musb: omap: Configure OTG_INTERFSEL for proper charger detection
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 2/7] ARM: pm: preallocate a page table for suspend/resume
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 1/7] ARM: pm: force non-zero return value from __cpu_suspend when aborting
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 10/11] ARM: pm: convert some assembly to C
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 1/2] misc: remove CONFIG_MISC_DEVICES
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] mfd: Combine MFD_SUPPORT and MFD_CORE
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 1/6] usb: musb: omap: Configure OTG_INTERFSEL for proper charger detection
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• RE: READ THIS: the next mach-types update
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH 0/5 v9] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 0/5 v9] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCHv8] 00/16] OMAP PRCM chain handler driver
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCHv8 06/16] power: omap-prm: added chain interrupt handler
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• [PATCH] ti816x: add support for nand on ti8168 evm
  • From: "Saxena, Parth" <parth.saxena@xxxxxx>
• Re: [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/2] misc: remove CONFIG_MISC_DEVICES
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH] ti816x: add support for nand on ti8168 evm
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• RE: [PATCH] ti816x: add support for nand on ti8168 evm
  • From: "Saxena, Parth" <parth.saxena@xxxxxx>
• Re: [PATCH 1/5 v9] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 1/2] misc: remove CONFIG_MISC_DEVICES
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2 0/6] OMAP: DSS: porting old drivers to DSS2 (board files part)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv2 09/15] OMAP: DSS2: HDMI: implement detect()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: martin@xxxxxxxxxxxxxxxxxxxxxx
• RE: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 5/5 v9] mfd: omap: usb: Runtime PM support
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• RE: [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: "Mohammed, Afzal" <afzal@xxxxxx>
• Re: [PATCH] ti816x: add support for nand on ti8168 evm
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: martin@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: martin@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH 1/2] misc: remove CONFIG_MISC_DEVICES
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH 1/2] misc: remove CONFIG_MISC_DEVICES
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] misc: remove CONFIG_MISC_DEVICES
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v2 1/8] OMAP: hwmod: Fix the addr spaces, irq, dma count APIs.
  • From: Santosh <santosh.shilimkar@xxxxxx>
• Re: [PATCH 24/25] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.
  • From: Santosh <santosh.shilimkar@xxxxxx>
• Re: [PATCH 23/25] OMAP4: PM: Add CPUidle support
  • From: Santosh <santosh.shilimkar@xxxxxx>
• Re: [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support
  • From: Santosh <santosh.shilimkar@xxxxxx>
• Re: [PATCH] iommu/omap: Fix build error with !IOMMU_SUPPORT
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Sylwester Nawrocki <snjw23@xxxxxxxxx>
• Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: READ THIS: the next mach-types update
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: READ THIS: the next mach-types update
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Martin Hostettler <martin@xxxxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] omap voltage cleanup for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap cleanup part1 for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• omap kernel mirror?
  • From: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] OMAP2+: powerdomain: control power domains next state
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH v3 0/6] iommu: split mapping to page sizes as supported by the hardware
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v3 6/6] iommu/core: remove the temporary register_iommu_pgsize API
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v3 2/6] iommu/omap: announce supported page sizes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v3 3/6] iommu/msm: announce supported page sizes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v3 4/6] iommu/amd: announce supported page sizes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v3 5/6] iommu/intel: announce supported page sizes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 24/25] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2 5/6] OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2 4/6] OMAP3+: use DPLLs recalc function instead of omap2_get_dpll_rate
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v3 3/6] OMAP3+: use DPLL's round_rate when setting rate
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2 2/6] OMAP4: Clock: round_rate and recalc functions for DPLL_ABE
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 5/5 v9] mfd: omap: usb: Runtime PM support
  • From: Frank Rowand <frank.rowand@xxxxxxxxxxx>
• [PATCH v2 1/6] OMAP4: Add missing clock divider for OCP_ABE_ICLK
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2 0/6] OMAP3+ Clock Fixes
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH 23/25] OMAP4: PM: Add CPUidle support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support
  • From: Kevin Hilman <khilman@xxxxxx>
• [GIT PULL] OMAP PM cleanup for v3.2
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] OMAP3: PM: fix UART handling when using no_console_suspend
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 5/6] OMAP: omap_device: Create a default omap_device_pm_latency
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/8] OMAP: convert I2C driver to PM QoS for latency constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCHv8 16/16] TEMP: OMAP device: change pr_warnings to pr_debugs
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 15/16] OMAP3: pm: do not enable PRCM MPU interrupts manually
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 04/16] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 11/16] TEMP: mux: added trace for io wkup event
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 06/16] power: omap-prm: added chain interrupt handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 10/16] TEMP: 4430sdp: use common serial init with mux support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 03/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 05/16] TEMP: OMAP4xxx: hwmod data: add PRM hwmod
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 01/16] power: add omap prm driver skeleton
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 14/16] TEMP: OMAP: serial: remove padconf hacks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 02/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 13/16] TEMP: OMAP3: serial: made serial to work properly with PRCM chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8] 00/16] OMAP PRCM chain handler driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 12/16] TEMP: OMAP3: pm: remove serial resume / idle calls from idle path
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 09/16] TEMP: serial: added mux support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 08/16] omap3: pm: use prcm chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 07/16] OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 6/8] OMAP: PM CONSTRAINTS: implement the devices wake-up latency constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 6/8] OMAP: PM CONSTRAINTS: implement the devices wake-up latency constraints
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] OMAP: hwmod: Fix the addr spaces, irq, dma count APIs.
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/8] OMAP: convert I2C driver to PM QoS for latency constraints
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 0/2] OMAP: omap_device: Add a method to build an omap_device from a DT node
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [RFC PATCH 1/6] usb: musb: omap: Configure OTG_INTERFSEL for proper charger detection
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Problems with 3.1.0-rc6 on at3517evm
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• RE: Problems with 3.1.0-rc6 on at3517evm
  • From: "Koyamangalath, Abhilash" <abhilash.kv@xxxxxx>
• Re: [RFC PATCH 1/6] usb: musb: omap: Configure OTG_INTERFSEL for proper charger detection
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: Problems with 3.1.0-rc6 on at3517evm
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Problems with 3.1.0-rc6 on at3517evm
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl
  • From: "Ravi, Deepthy" <deepthy.ravi@xxxxxx>
• Re: [PATCHv2 09/15] OMAP: DSS2: HDMI: implement detect()
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 5/6] OMAP: omap_device: Create a default omap_device_pm_latency
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 5/5] [media]: OMAP_VOUT: Don't trigger updates in omap_vout_probe
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 4/5] [media] OMAP_VOUT: Add support for DSI panels
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 3/5] [media]: OMAP_VOUT: Fix VSYNC IRQ handling in omap_vout_isr
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 2/5] [media]: OMAP_VOUT: CLEANUP: Remove redundant code from omap_vout_isr
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 1/5] [media]: OMAP_VOUT: Fix check in reqbuf & mmap for buf_size allocation
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 0/5] [media]: OMAP_VOUT: Misc fixes and cleanup patches for 3.2
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] iommu/omap: Fix build error with !IOMMU_SUPPORT
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/6] usb: musb: omap: Configure OTG_INTERFSEL for proper charger detection
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5 v9] mfd: omap: usb: Runtime PM support
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 11/11] DT: regulator: register regulators as platform devices
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 3/3] OMAPDSS: DISPC: zorder support for DSS overlays
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v2 2/3] OMAPDSS: DISPC: VIDEO3 pipeline support
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v2 1/3] OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v2 0/3] OMAPDSS: DISPC: VIDEO3 and ZORDER support
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] OMAPDSS: HDMI: Register definition cleanup and improvements
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] OMAPDSS: HDMI: Register definition cleanup and improvements
  • From: <mythripk@xxxxxx>
• Re: [PATCH 5/5 v9] mfd: omap: usb: Runtime PM support
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH] mfd: twl6030: Setup irq_wake infrastructure.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 5/5 v9] mfd: omap: usb: Runtime PM support
  • From: Frank Rowand <frank.rowand@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP: omap_device cleanup for v3.2
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 6/8] OMAP: PM CONSTRAINTS: implement the devices wake-up latency constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• [GIT PULL] OMAP: omap_device cleanup for v3.2
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [GIT PULL] OMAP voltage layer cleanup for v3.2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Tasks schedule/migration issue with CPU hotplug?
  • From: TAO HU <tghk48@xxxxxxxxxxxx>
• Re: [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/8] OMAP: convert I2C driver to PM QoS for latency constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] mfd: twl6030: Setup irq_wake infrastructure.
  • From: Todd Poynor <toddpoynor@xxxxxxxxxx>
• Re: [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: ti.com addresses randomly unsubscribed from vger.kernel.org lists
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] OMAP voltage layer cleanup for v3.2
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl6030: Setup irq_wake infrastructure.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] mfd: Combine MFD_SUPPORT and MFD_CORE
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/4] AM3517 : support for suspend/resume
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl6030: Setup irq_wake infrastructure.
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC/MFD: twl4030: Fix dependencies for audio codec
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: Add PWM1 and PWM2 support to twl6030-pwm
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: remove CONFIG_MFD_SUPPORT
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [RFC PATCH 11/11] DT: regulator: register regulators as platform devices
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 3/6] OMAP4: TWL6030: add USB charger detection
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 4/6] MUSB Charger Type Detection: Fix DCP detect during boot.
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 6/6] twl6030: set charger current to be used by battery charging module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 5/6] OMAP4: PHY internal: Add msleep_interruptible to charger detection function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/6] usb: musb: omap4430_phy_power to enable/disable clocks and power up/down phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 1/6] usb: musb: omap: Configure OTG_INTERFSEL for proper charger detection
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 0/6] usb: musb: charger detection
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 07/11] regulator: Make fixed regulator driver extract data from DT
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Kernel Halt with framebuffer enabled: omap_mbox_get()
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: Kernel Halt with framebuffer enabled: omap_mbox_get()
  • From: "Stuart Brown" <Stuart.Brown@xxxxxxxxxx>
• Re: [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH 1/5 v9] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 3/5 v9] arm: omap: usb: register hwmods of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 4/5 v9] arm: omap: usb: device name change for the clk names of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 5/5 v9] mfd: omap: usb: Runtime PM support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/5 v9] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 2/5 v9] arm: omap: usb: ehci and ohci hwmod structures for omap3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: Kernel Halt with framebuffer enabled: omap_mbox_get()
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Kernel Halt with framebuffer enabled: omap_mbox_get()
  • From: "Stuart Brown" <Stuart.Brown@xxxxxxxxxx>
• Re: [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 11/11] DT: regulator: register regulators as platform devices
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 00/11] Device tree support for regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 07/11] regulator: Make fixed regulator driver extract data from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 08/11] omap4: panda: Pass fixed regulator data from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] iommu/omap: Fix build error with !IOMMU_SUPPORT
  • From: "Roedel, Joerg" <Joerg.Roedel@xxxxxxx>
• Re: [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 0/8] PM QoS: implement the OMAP low level constraints management code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• RE: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver
  • From: "Mohammed, Afzal" <afzal@xxxxxx>
• patch "[PATCH] OMAP4: clock: re-enable previous clockdomain enable/disable" failed to apply to 3.0-stable tree
  • From: <gregkh@xxxxxxx>
• Re: [PATCH 1/5 v8] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• [PATCH 3/3] OMAP4: 4430SDP: Add picodlp support to board file
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/3] OMAP4: 4430SDP: Add panel support to board file
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/3] OMAP: DSS2: Taal: remove external backlight support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/3] OMAP: DSS: display support for 4430SDP
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [RFC PATCH-V2 0/4] Introducing TI's New SoC/board AM335XEVM
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] DMAEngine: Define generic transfer request api
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH] DMAEngine: Define generic transfer request api
  • From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
• Re: [PATCHv2 09/15] OMAP: DSS2: HDMI: implement detect()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] DMAEngine: Define generic transfer request api
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCHv2 09/15] OMAP: DSS2: HDMI: implement detect()
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [PATCHv2 09/15] OMAP: DSS2: HDMI: implement detect()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>