From: Jon Hunter <jon-hunter@xxxxxx> This is a continuation of Mike Turquette's patch "OMAP3+: use DPLL's round_rate when setting rate". omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call omap2_get_dpll_rate() explicitly. It may be necessary for some DPLLs to use a different function and so use the DPLLs recalc() function pointer instead. An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier in addition to the usual MN multipler and dividers and therefore uses a different round_rate and recalc function. Signed-off-by: Jon Hunter <jon-hunter@xxxxxx> --- arch/arm/mach-omap2/dpll3xxx.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 73a1595..7916f66 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -390,7 +390,7 @@ int omap3_noncore_dpll_enable(struct clk *clk) * propagating? */ if (!r) - clk->rate = omap2_get_dpll_rate(clk); + clk->rate = clk->recalc(clk); return r; } @@ -435,7 +435,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) if (!dd) return -EINVAL; - if (rate == omap2_get_dpll_rate(clk)) + if (rate == clk->recalc(clk)) return 0; /* -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
