The device file adds the device support for OMAP4 system control module. Signed-off-by: Keerthy <j-keerthy@xxxxxx> Cc: tony@xxxxxxxxxxx --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/scm_device.c | 125 ++++++++++++++++++++++++++++++++++++++ arch/arm/plat-omap/Kconfig | 12 ++++ 3 files changed, 138 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/scm_device.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index e6f8d36..3332693 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +obj-$(CONFIG_OMAP_SCM_DEV) += scm_device.o obj-$(CONFIG_TWL4030_CORE) += omap_twl.o diff --git a/arch/arm/mach-omap2/scm_device.c b/arch/arm/mach-omap2/scm_device.c new file mode 100644 index 0000000..d942f28 --- /dev/null +++ b/arch/arm/mach-omap2/scm_device.c @@ -0,0 +1,125 @@ +/* + * OMAP4460+ SCM device file + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Author: J Keerthy <j-keerthy@xxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/mutex.h> +#include <linux/idr.h> +#include <plat/omap_device.h> +#include "pm.h" +#include <plat/scm.h> + +static struct omap_device_pm_latency scm_latency[] = { + { + .deactivate_func = NULL, + .activate_func = NULL, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + } +}; + +static DEFINE_IDR(scm_device_idr); + +static int scm_dev_init(struct omap_hwmod *oh, void *user) +{ + struct omap4460plus_scm_pdata *scm_pdata; + struct omap_device *od; + struct omap4460plus_scm_dev_attr *scm_dev_attr; + struct omap_temp_sensor_registers *reg_ptr; + const char *name_ptr; + int ret = 0; + int num, i; + + scm_pdata = + kzalloc(sizeof(*scm_pdata), GFP_KERNEL); + if (!scm_pdata) { + dev_err(&oh->od->pdev.dev, + "Unable to allocate memory for scm pdata\n"); + return -ENOMEM; + } + + ret = idr_pre_get(&scm_device_idr, GFP_KERNEL); + if (ret < 0) + goto fail_id; + ret = idr_get_new(&scm_device_idr, scm_pdata, &num); + if (ret < 0) + goto fail_id; + scm_dev_attr = oh->dev_attr; + scm_pdata->cnt = scm_dev_attr->cnt; + + if (scm_dev_attr->cnt > 0) { + scm_pdata->name = kzalloc(sizeof(name_ptr) * + scm_dev_attr->cnt, GFP_KERNEL); + if (!scm_pdata->name) { + dev_err(&oh->od->pdev.dev, + "Unable to allocate memory for scm name\n"); + ret = -ENOMEM; + goto fail_id; + } + + scm_pdata->registers = kzalloc(sizeof(reg_ptr) * + scm_dev_attr->cnt, GFP_KERNEL); + if (!scm_pdata->name) { + dev_err(&oh->od->pdev.dev, + "Unable to allocate mem for scm registers\n"); + ret = -ENOMEM; + kfree(scm_pdata->name); + goto fail_id; + } + + for (i = 0; i < scm_dev_attr->cnt; i++) { + scm_pdata->registers[i] = scm_dev_attr->list[i]; + scm_pdata->name[i] = scm_dev_attr->name[i]; + } + } else { + dev_warn(&oh->od->pdev.dev, "Invalid device count\n"); + ret = -EINVAL; + goto fail_id; + } + + od = omap_device_build("omap4460plus_scm", num, + oh, scm_pdata, sizeof(*scm_pdata), + scm_latency, + ARRAY_SIZE(scm_latency), 0); + + if (IS_ERR(od)) { + dev_warn(&oh->od->pdev.dev, + "Could not build omap_device for %s\n", oh->name); + ret = PTR_ERR(od); + } + +fail_id: + kfree(scm_pdata); + + return ret; +} + +int __init omap4460plus_devinit_scm(void) +{ + if (!cpu_is_omap446x()) + return 0; + + return omap_hwmod_for_each_by_class("ctrl_module", + scm_dev_init, NULL); +} + +arch_initcall(omap4460plus_devinit_scm); diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index bb8f4a6..f1f572b 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -116,6 +116,18 @@ config OMAP_MCBSP Say Y here if you want support for the OMAP Multichannel Buffered Serial Port. +config OMAP_SCM_DEV + bool "OMAP4 System control module Support" + depends on ARCH_OMAP + default n + help + Say Y here if you want support for the system control + module on OMAP4. + + This provides the basic support of system control module + subsystem. SCM also includes instance/instances of on die + temperature sensor. + config OMAP_MBOX_FWK tristate "Mailbox framework support" depends on ARCH_OMAP -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
