Hi
a few comments
On Thu, 22 Sep 2011, Keshava Munegowda wrote:
> following 4 hwmod structures are added
> 1. usb_host_hs hwmod of usbhs with uhh base address and functional clock,
> 2. usb_ehci_hs hwmod with irq and base address,
> 3. usb_ohci_hs hwmod with irq and base address,
> - the ehci and ohci hwmods does not require functional clock
> because usb_host_hs has functional clock which is sufficient
> to access ehci and ohci address space.
Every hwmod should have a functional clock defined. If they use the same
functional clock as usb_host_hs, then the same main_clk should be listed
for ehci/ohci also.
> 4. usb_tll_hs hwmod of usbhs with the TLL base address and irq.
>
> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
> Reviewed-by: Partha Basak <parthab@xxxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 271 ++++++++++++++++++++++++++++
> 1 files changed, 271 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> index 59fdb9f..d79f728 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -84,6 +84,10 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
> static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
> static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
> static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
> +static struct omap_hwmod omap34xx_usb_host_hs_hwmod;
> +static struct omap_hwmod omap34xx_usbhs_ohci_hwmod;
> +static struct omap_hwmod omap34xx_usbhs_ehci_hwmod;
> +static struct omap_hwmod omap34xx_usb_tll_hs_hwmod;
>
> /* L3 -> L4_CORE interface */
> static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
> @@ -3196,6 +3200,266 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
> .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> };
>
> +/*
> + * 'usb_host_hs' class
> + * high-speed multi-port usb host controller
> + */
> +static struct omap_hwmod_ocp_if omap34xx_usb_host_hs__l3_main_2 = {
> + .master = &omap34xx_usb_host_hs_hwmod,
> + .slave = &omap3xxx_l3_main_hwmod,
> + .clk = "core_l3_ick",
> + .user = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_class_sysconfig omap34xx_usb_host_hs_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
This is missing a bunch of SYSC bits, according to Table 24-152
"UHH_SYSCONFIG" of the 34xx public TRM, version ZR.
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class omap34xx_usb_host_hs_hwmod_class = {
> + .name = "usb_host_hs",
> + .sysc = &omap34xx_usb_host_hs_sysc,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usb_host_hs_masters[] = {
> + &omap34xx_usb_host_hs__l3_main_2,
> +};
> +
> +static struct omap_hwmod_addr_space omap34xx_usb_host_hs_addrs[] = {
> + {
> + .name = "uhh",
> + .pa_start = 0x48064000,
> + .pa_end = 0x480643ff,
> + .flags = ADDR_TYPE_RT
> + },
> + {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_l4_cfg__usb_host_hs = {
> + .master = &omap3xxx_l4_core_hwmod,
> + .slave = &omap34xx_usb_host_hs_hwmod,
> + .clk = "l4_ick",
> + .addr = omap34xx_usb_host_hs_addrs,
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_f128m_cfg__usb_host_hs = {
> + .clk = "usbhost_120m_fck",
This doesn't look right. This is an interface structure record, so it
should be associated with an interface clock. Is the hardware really
using the functional clock as the interface clock? Or, as seems more
likely...
> + .user = OCP_USER_MPU,
> + .flags = OCPIF_SWSUP_IDLE,
... is this just a hack? OCPIF_SWSUP_IDLE is intended to work around
hardware autoidle bugs only. Are you sure this shouldn't be defined as an
optional clock instead?
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_f48m_cfg__usb_host_hs = {
> + .clk = "usbhost_48m_fck",
> + .user = OCP_USER_MPU,
> + .flags = OCPIF_SWSUP_IDLE,
> +};
Same comments as the above.
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usb_host_hs_slaves[] = {
> + &omap34xx_l4_cfg__usb_host_hs,
> + &omap34xx_f128m_cfg__usb_host_hs,
> + &omap34xx_f48m_cfg__usb_host_hs,
> +};
> +
> +static struct omap_hwmod omap34xx_usb_host_hs_hwmod = {
> + .name = "usb_host_hs",
> + .class = &omap34xx_usb_host_hs_hwmod_class,
> + .main_clk = "usbhost_ick",
Is this really the main clock? The main clock is the clock that drives
the register logic in the IP block. Looks to me, based on the integration
document in the 34xx TRM vZR, that this module has a functional clock. In
general, the only time that the main_clk should be an interface clock is
when the clock is a combined interface and functional clock. The mailbox
IP block is a classic example.
> + .prcm = {
> + .omap2 = {
> + .module_offs = OMAP3430ES2_USBHOST_MOD,
> + .prcm_reg_id = 1,
> + .module_bit = 0,
> + .idlest_reg_id = 1,
> + .idlest_idle_bit = 1,
> + .idlest_stdby_bit = 0,
These bit shifts should use macros, rather than numbers, which is the
existing practice for the other hwmods in the
omap_hwmod_3xxx_data.c file.
> + },
> + },
> + .slaves = omap34xx_usb_host_hs_slaves,
> + .slaves_cnt = ARRAY_SIZE(omap34xx_usb_host_hs_slaves),
> + .masters = omap34xx_usb_host_hs_masters,
> + .masters_cnt = ARRAY_SIZE(omap34xx_usb_host_hs_masters),
> +/*
> + * The usbhs controller prevents the enter omap to low power mode
> + * if other than FORCE IDLE and FORCE STANDBY are used.
> + */
> + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
Please rebase this series on Tony's current master branch, which gets rid
of the omap_chip structure field.
> +};
> +
> +/* 'usb_ohci_hs' class */
> +static struct omap_hwmod_class omap34xx_usbhs_ohci_hwmod_class = {
> + .name = "usb_ohci_hs",
> +};
> +
> +static struct omap_hwmod_irq_info omap34xx_usbhs_ohci_irqs[] = {
> + { .name = "ohci-irq", .irq = 76 },
> + { .irq = -1 }
> +};
> +
> +static struct omap_hwmod_addr_space omap34xx_usbhs_ohci_addrs[] = {
> + {
> + .name = "ohci",
> + .pa_start = 0x48064400,
> + .pa_end = 0x480647ff,
This is missing a
.flags = ADDR_TYPE_RT
since this address range is a register target.
> + },
> + {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_l4_cfg__usbhs_ohci = {
> + .master = &omap3xxx_l4_core_hwmod,
> + .slave = &omap34xx_usbhs_ohci_hwmod,
> + .clk = "l4_ick",
> + .addr = omap34xx_usbhs_ohci_addrs,
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usbhs_ohci_slaves[] = {
> + &omap34xx_l4_cfg__usbhs_ohci,
> +};
> +
> +static struct omap_hwmod omap34xx_usbhs_ohci_hwmod = {
> + .name = "usb_ohci_hs",
This is missing a main_clk.
> + .class = &omap34xx_usbhs_ohci_hwmod_class,
> + .mpu_irqs = omap34xx_usbhs_ohci_irqs,
> + .slaves = omap34xx_usbhs_ohci_slaves,
> + .slaves_cnt = ARRAY_SIZE(omap34xx_usbhs_ohci_slaves),
> +/*
> + * The ohci hwmod does not has any sysconfig , so
> + * there is no RESET and IDLE settings.
> + */
> + .flags = HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> +};
> +
> +/* 'usb_ehci_hs' class */
> +static struct omap_hwmod_class omap34xx_usbhs_ehci_hwmod_class = {
> + .name = "usb_ehci_hs",
> +};
> +
> +static struct omap_hwmod_irq_info omap34xx_usbhs_ehci_irqs[] = {
> + { .name = "ehci-irq", .irq = 77 },
> + { .irq = -1 }
> +};
> +
> +static struct omap_hwmod_addr_space omap34xx_usbhs_ehci_addrs[] = {
> + {
> + .name = "ehci",
> + .pa_start = 0x48064800,
> + .pa_end = 0x48064cff,
This is missing a
.flags = ADDR_TYPE_RT
since this address range is a register target.
> + },
> + {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_l4_cfg__usbhs_ehci = {
> + .master = &omap3xxx_l4_core_hwmod,
> + .slave = &omap34xx_usbhs_ehci_hwmod,
> + .clk = "l4_ick",
> + .addr = omap34xx_usbhs_ehci_addrs,
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usbhs_ehci_slaves[] = {
> + &omap34xx_l4_cfg__usbhs_ehci,
> +};
> +
> +static struct omap_hwmod omap34xx_usbhs_ehci_hwmod = {
> + .name = "usb_ehci_hs",
> + .class = &omap34xx_usbhs_ehci_hwmod_class,
This is missing a main_clk.
> + .mpu_irqs = omap34xx_usbhs_ehci_irqs,
> + .slaves = omap34xx_usbhs_ehci_slaves,
> + .slaves_cnt = ARRAY_SIZE(omap34xx_usbhs_ehci_slaves),
> +/*
> + * The ehci hwmod does not has any sysconfig , so
> + * there is no RESET and IDLE settings.
> + */
> + .flags = HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> +};
> +
> +/*
> + * 'usb_tll_hs' class
> + * usb_tll_hs module is the adapter on the usb_host_hs ports
> + */
> +static struct omap_hwmod_class_sysconfig omap34xx_usb_tll_hs_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
> + SYSC_HAS_SOFTRESET | SYSC_HAS_ENAWAKEUP |
> + SYSC_HAS_CLOCKACTIVITY),
These flags should be aligned with the character after the first
parenthesis.
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class omap34xx_usb_tll_hs_hwmod_class = {
> + .name = "usb_tll_hs",
> + .sysc = &omap34xx_usb_tll_hs_sysc,
> +};
> +
> +static struct omap_hwmod_irq_info omap34xx_usb_tll_hs_irqs[] = {
> + { .name = "tll-irq", .irq = 78 },
> + { .irq = -1 }
> +};
> +
> +static struct omap_hwmod_addr_space omap34xx_usb_tll_hs_addrs[] = {
> + {
> + .name = "tll",
> + .pa_start = 0x48062000,
> + .pa_end = 0x48062fff,
> + .flags = ADDR_TYPE_RT
> + },
> + {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap34xx_f_cfg__usb_tll_hs = {
> + .clk = "usbtll_fck",
> + .user = OCP_USER_MPU,
> + .flags = OCPIF_SWSUP_IDLE,
> +};
Same comments as for omap34xx_f128m_cfg__usb_host_hs above.
> +
> +static struct omap_hwmod_ocp_if omap34xx_l4_cfg__usb_tll_hs = {
> + .master = &omap3xxx_l4_core_hwmod,
> + .slave = &omap34xx_usb_tll_hs_hwmod,
> + .clk = "l4_ick",
> + .addr = omap34xx_usb_tll_hs_addrs,
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap34xx_usb_tll_hs_slaves[] = {
> + &omap34xx_l4_cfg__usb_tll_hs,
> + &omap34xx_f_cfg__usb_tll_hs,
> +};
> +
> +static struct omap_hwmod omap34xx_usb_tll_hs_hwmod = {
> + .name = "usb_tll_hs",
> + .class = &omap34xx_usb_tll_hs_hwmod_class,
> + .mpu_irqs = omap34xx_usb_tll_hs_irqs,
> + .main_clk = "usbtll_ick",
Is this really the main clock? The main clock is the clock that drives
the register logic in the IP block. Looks to me, based on the integration
document in the 34xx TRM vZR, that this module has a functional clock.
> + .prcm = {
> + .omap2 = {
> + .module_offs = CORE_MOD,
> + .prcm_reg_id = 3,
> + .module_bit = 2,
> + .idlest_reg_id = 3,
> + .idlest_idle_bit = 2,
These bit shifts should use macros, rather than numbers, which is the
existing practice for the other hwmods in the
omap_hwmod_3xxx_data.c file.
> + },
> + },
> + .slaves = omap34xx_usb_tll_hs_slaves,
> + .slaves_cnt = ARRAY_SIZE(omap34xx_usb_tll_hs_slaves),
> +/*
> + * The usbhs controller prevents the enter omap to low power mode
> + * if other than FORCE IDLE for TLL mode too.
> + */
> + .flags = HWMOD_SWSUP_SIDLE,
> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
> +};
> +
> static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
> &omap3xxx_l3_main_hwmod,
> &omap3xxx_l4_core_hwmod,
> @@ -3225,6 +3489,13 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
> &omap3xxx_uart2_hwmod,
> &omap3xxx_uart3_hwmod,
> &omap3xxx_uart4_hwmod,
> +
> + /* usb host class */
> + &omap34xx_usb_host_hs_hwmod,
> + &omap34xx_usbhs_ohci_hwmod,
> + &omap34xx_usbhs_ehci_hwmod,
> + &omap34xx_usb_tll_hs_hwmod,
> +
> /* dss class */
> &omap3430es1_dss_core_hwmod,
> &omap3xxx_dss_core_hwmod,
> --
> 1.6.0.4
>
- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
