Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH V2 1/1] mmc: start removing enable / disable API
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/2] ARM: OMAP: Remove definition cpu_is_omap4430()
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH 1/2] ARM: OMAP: DMA: Fix DMA channel end definition for OMAP36xx-PLUS devices
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH 0/2] ARM: OMAP: OMAP3+ DMA and Device ID Fixes
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: powerdomain: unwrap and simplify logging strings
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH] ARM: OMAP: hsmmc: add max_freq field
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] cbus: Fix lines for Nokia 770
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 3/5] First set of omap1 related changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Ethernet problems on AM3517, possible regression?
  • From: CF Adad <cfadad@xxxxxxxxxxxxxx>
• Re: [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [GIT PULL 3/5] First set of omap1 related changes
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] cpufreq: OMAP: specify range for voltage scaling
  • From: Kevin Hilman <khilman@xxxxxx>
• MMC read errors
  • From: Adam Wozniak <awozniak@xxxxxxxxxx>
• Re: [PATCH v7 0/9] Consolidate cpuidle functionality
  • From: Rob Lee <rob.lee@xxxxxxxxxx>
• Re: [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v7 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Rob Lee <rob.lee@xxxxxxxxxx>
• Re: [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] cpufreq: OMAP: specify range for voltage scaling
  • From: Kevin Hilman <khilman@xxxxxx>
• omap4 rotation support
  • From: "Graham, Jeff" <Jeff.Graham@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] mmc: omap_hsmmc: Use GPIO offset for external GPIO chips
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] Start getting rid of pdata callbacks with gpio_find_by_chip_name()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP2+: Remove extra ifdefs for board-generic
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Few more omap DT patches for next merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] mmc: omap_hsmmc: set dto to 14 for all devices
  • From: Chase Maupin <Chase.Maupin@xxxxxx>
• Re: Question: Custom DAI driver for AM35xx using McBSP
  • From: CF Adad <cfadad@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Randconfig module build error with OMAP4_ERRATA_I688
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH] ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH V2 1/1] mmc: start removing enable / disable API
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• [PATCH 7/7] OMAPDSS: HDMI: PHY burnout fix
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/7] OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 6/7] OMAP: 4430SDP/Panda: add HDMI HPD gpio
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/7] OMAPDSS: remove wrong HDMI HPD muxing
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/7] OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/7] OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/7] OMAP: DSS2: HDMI: use default dividers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/7] OMAPDSS: HDMI PHY burnout fix for 3.0 stable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/7] OMAPDSS: remove wrong HDMI HPD muxing
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/7] OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/7] OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/7] OMAP: 4430SDP/Panda: add HDMI HPD gpio
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 7/7] OMAPDSS: HDMI: hot plug detect fix
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 6/7] OMAPDSS: HDMI: PHY burnout fix
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/7] OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/7] OMAPDSS: HDMI PHY burnout fix for 3.2 stable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAPDSS: HDMI: wait for RXDET before putting phy in TX_ON
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/2] musb runtime_pm fixes
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH V2 1/1] mmc: start removing enable / disable API
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP3: cm-t3517: add EMAC support
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] ARM: OMAP: move generic EMAC init to separate file
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: Randconfig module build error with OMAP4_ERRATA_I688
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH V2 1/1] mmc: start removing enable / disable API
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH] OMAPDSS: HDMI: wait for RXDET before putting phy in TX_ON
  • From: <mythripk@xxxxxx>
• [PATCH 0/7] remoteproc: additional virtio support
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 2/7] remoteproc: remoteproc_rpmsg -> remoteproc_virtio
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 3/7] remoteproc: safer boot/shutdown order
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 4/7] remoteproc: remove the single rpmsg vdev limitation
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 5/7] remoteproc/omap: remove the mbox_callback limitation
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 7/7] remoteproc: cleanup resource table parsing paths
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 6/7] remoteproc: remove the hardcoded vring alignment
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 1/7] remoteproc: resource table overhaul
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH V2 1/1] mmc: start removing enable / disable API
  • From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
• Re: help: BeagleBoard xM RevC ethernet port
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 0/4] twl-regulator DT adaptation and updates to add new regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 0/2] OMAPDSS: small fixes for 3.3 rc
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: powerdomain: unwrap and simplify logging strings
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: powerdomain: unwrap and simplify logging strings
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v7 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v7 9/9] SH: shmobile: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 8/9] ARM: shmobile: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 7/9] ARM: omap: Consolidate OMAP4 time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 6/9] ARM: omap: Consolidate OMAP3 time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 5/9] ARM: davinci: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 4/9] ARM: kirkwood: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 3/9] ARM: exynos: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 2/9] ARM: at91: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v7 0/9] Consolidate cpuidle functionality
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• Re: [GIT PULL 5/5] Clean-up for omap
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v2 10/10] ASoC: omap-mcbsp: Simplify DMA configuration
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/10] ASoC: omap-mcbsp: Merge the omap_mcbsp_data into omap_mcbsp structure
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v2 08/10] ASoC: omap-mcbsp: Cleanup of module probe/remove code
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/10] ASoC: omap-mcbsp: Create a single driver for McBSP
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/10] ASoC: OMAP: McBSP: Consolidate plat/mcbsp.h content
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 04/13] ARM: OMAP3+: SmartReflex: Add a shutdown hook
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] twl-regulator DT adaptation and updates to add new regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/13] ARM: OMAP3+: SmartReflex: Add a shutdown hook
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v2 4/9] gpio/omap: remove saved_wakeup field from struct gpio_bank
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 6/9] gpio/omap: fix trigger type to unsigned
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 5/9] gpio/omap: get rid of retrigger variable in gpio_irq_handler
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 3/9] gpio/omap: remove suspend_wakeup field from struct gpio_bank
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 9/9] gpio/omap: remove suspend/resume callbacks
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 7/9] gpio/omap: fix _set_gpio_irqenable implementation
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 1/9] gpio/omap: remove saved_fallingdetect, saved_risingdetect fields
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 8/9] gpio/omap: remove redundant decoding of gpio offset
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 0/9] gpio/omap: Some more driver cleanup and fixes
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v2 2/9] gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• Re: [PATCH] ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 13/13] ARM: OMAP3+: SmartReflex: fix error handling
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 12/13] ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 11/13] ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 10/13] ARM: OMAP3+: SmartReflex: misc cleanups
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 09/13] ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 08/13] ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 07/13] ARM: OMAP3+: hwmod: add SmartReflex IRQs
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 06/13] ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 05/13] ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 04/13] ARM: OMAP3+: SmartReflex: Add a shutdown hook
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 03/13] ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 02/13] ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 01/13] ARM: OMAP3+: SmartReflex: use voltage domain name in device attributes
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH v5 00/13] ARM: OMAP3+: SmartReflex: bugfixes and clean-ups
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: IRQ domain support for INTC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 5/5] Clean-up for omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 5/5] Clean-up for omap
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Rob Lee <rob.lee@xxxxxxxxxx>
• Re: [GIT PULL 3/5] First set of omap1 related changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 4/5] First round of DT related omap changes
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 3/5] First set of omap1 related changes
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 2/5] First set of omap SoC related changes
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 1/5] non-critical fixes for v3.4 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• RE: [RFC PATCH] of: DMA helpers: manage generic requests specification
  • From: Stephen Warren <swarren@xxxxxxxxxx>
• [GIT PULL 1/5] non-critical fixes for v3.4 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/2] change lpj in arm smp common code
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: help: BeagleBoard xM RevC ethernet port
  • From: Brian Austin <brian.austin@xxxxxxxxxx>
• Randconfig module build error with OMAP4_ERRATA_I688
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: OMAP2+: Fix GPMC errors when CONFIG_MTD_NAND_OMAP2 is a module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Question: Custom DAI driver for AM35xx using McBSP
  • From: CF Adad <cfadad@xxxxxxxxxxxxxx>
• Re: [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv3 2/4] ARM: OMAP4: prm: fix interrupt register offsets
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: IRQ domain support for INTC
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCHv3 0/4] ARM: OMAP4: core retention support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCHv3 4/4] ARM: OMAP3+: add prcm chain interrupts to the interrupt list
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 3/4] TEMP: ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 2/4] ARM: OMAP4: prm: fix interrupt register offsets
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 1/4] ARM: OMAP4: suspend: Program all domains to retention
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 0/4] ARM: OMAP4: core retention support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: OMAP4 HDMI PHY bug work-around for stable
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH] of: DMA helpers: manage generic requests specification
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 2/2] OMAPDSS: APPLY: make ovl_enable/disable synchronous
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• [PATCHv3 6/6] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 4/6] ARM: OMAP3 PM: Enable IO Wake up
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 3/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 2/6] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 1/6] ARM: OMAP3 PM: correct enable/disable of daisy io chain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 0/6] ARM: OMAP3PLUS: IO daisychain support fixes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH RFC] spi/omap: Trivial cleanup
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH v6 5/9] ARM: davinci: Consolidate time keeping and irq enable
  • From: Rob Lee <rob.lee@xxxxxxxxxx>
• Re: [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Rob Lee <rob.lee@xxxxxxxxxx>
• Re: [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Rob Lee <rob.lee@xxxxxxxxxx>
• Re: [PATCH v2 1/5] spi/omap: Remove bus_num usage for instance index
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 1/5] spi/omap: Remove bus_num usage for instance index
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• RE: [PATCH V2 1/1] mmc: start removing enable / disable API
  • From: "Manjunathappa, Prakash" <prakash.pm@xxxxxx>
• Re: [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: [PATCH 2/2] OMAPDSS: APPLY: make ovl_enable/disable synchronous
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: [PATCH 2/2] OMAPDSS: APPLY: make ovl_enable/disable synchronous
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/2] OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/2] OMAPDSS: APPLY: make ovl_enable/disable synchronous
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: [PATCH 1/2] OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: [PATCH 0/2] OMAPDSS: small fixes for 3.3 rc
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: [PATCH v6 0/9] Consolidate cpuidle functionality
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: OMAP4 HDMI PHY bug work-around for stable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: More randconfig OMAP build errors
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/2] OMAPDSS: APPLY: make ovl_enable/disable synchronous
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/2] OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/2] OMAPDSS: small fixes for 3.3 rc
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/2] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/2] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v6 5/9] ARM: davinci: Consolidate time keeping and irq enable
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/2] change lpj in arm smp common code
  • From: Richard Zhao <richard.zhao@xxxxxxxxxx>
• [PATCH 2/2] cpufreq: OMAP: remove loops_per_jiffy recalculate for smp
  • From: Richard Zhao <richard.zhao@xxxxxxxxxx>
• [PATCH 1/2] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
  • From: Richard Zhao <richard.zhao@xxxxxxxxxx>
• [PATCH V2 1/1] mmc: start removing enable / disable API
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V2 0/1] mmc: start removing enable / disable API
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH] mmc: start removing enable / disable API
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v6 3/9] ARM: exynos: Consolidate time keeping and irq enable
  • From: Amit Kachhap <amit.kachhap@xxxxxxxxxx>
• Re: [PATCH] mmc: start removing enable / disable API
  • From: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Question: Custom DAI driver for AM35xx using McBSP
  • From: CF Adad <cfadad@xxxxxxxxxxxxxx>
• Re: OMAP gpio handling
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• [PATCH v6 6/9] ARM: omap: Consolidate OMAP3 time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 5/9] ARM: davinci: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 9/9] SH: shmobile: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 8/9] ARM: shmobile: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 7/9] ARM: omap: Consolidate OMAP4 time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 4/9] ARM: kirkwood: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 3/9] ARM: exynos: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 2/9] ARM: at91: Consolidate time keeping and irq enable
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 1/9] cpuidle: Add common time keeping and irq enabling
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• [PATCH v6 0/9] Consolidate cpuidle functionality
  • From: Robert Lee <rob.lee@xxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [GIT PULL] OMAP DSS fixes for 3.3-rc
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• RE: [GIT PULL] OMAP DSS fixes for 3.3-rc
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove apply_uV constraints for fixed regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: IRQ domain support for INTC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH v4 00/14] ARM: OMAP3+: SmartReflex: bugfixes and clean-ups
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 08/14] ARM: OMAP3+: hwmod: add SmartReflex IRQs
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: More randconfig OMAP build errors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/14] ARM: OMAP3+: SmartReflex: Add a shutdown hook
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2] OMAP4: dma: Correct CPU version check for dma_common_ch_end
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/14] ARM: OMAP3+: SmartReflex: Layer Cleanup [V4]
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix section mismatch warning for platform_cpu_die()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 3/5] arm/dts: OMAP4: Add SPI controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 1/5] spi/omap: Remove bus_num usage for instance index
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 4/5] arm/dts: OMAP3: Add SPI controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 5/5] arm/dts: omap4-sdp: Add ks8851 ethernet SPI device
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 2/5] spi/omap: Add DT support to McSPI driver
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 0/5] spi/omap: Adaptation to Device Tree
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: OMAP gpio handling
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 01/10] ARM: OMAP: mcbsp: Convert core driver to proper platform driver
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH v2 00/10] OMAP/ASoC: Move and merge McBSP driver under ASoC
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] tty: serial: OMAP: Fix oops due to NULL pdata in DT boot
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] tty: serial: OMAP: Fix oops due to NULL pdata in DT boot
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] trivial remoteproc/rpmsg fixes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 0/5] trivial remoteproc/rpmsg fixes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 2/5] remoteproc/omap: two Kconfig fixes
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 3/5] rpmsg: fix name service endpoint leak
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 4/5] rpmsg: validate incoming message length before propagating
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] tty: serial: OMAP: Fix oops due to NULL pdata in DT boot
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 5/5] rpmsg: fix published buffer length in rpmsg_recv_done
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 1/5] remoteproc: make sure we're parsing a 32bit firmware
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 2/3] tty: serial: OMAP: block idle while the UART is transferring data in PIO mode
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP4 HDMI PHY bug work-around for stable
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] OMAP DSS fixes for 3.3-rc
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [GIT PULL] OMAP DSS fixes for 3.3-rc
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: help: BeagleBoard xM RevC ethernet port
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: help: BeagleBoard xM RevC ethernet port
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• [PATCH] ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 1/4] usb: dwc3: core: Convert to module_platform_driver
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• [PATCH 7/9] ARM: OMAP4: hwmod data: add OCP_USER_DSP; mark omap44xx_dsp__iva appropriately
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/9] ARM: OMAP36xx: hwmod data: fix SmartReflex interface data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 6/9] ARM: OMAP4: hwmod data: remove bandgap hwmod
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/9] ARM: OMAP2/3: hwmod data: update old names
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/9] ARM: OMAP2+: hwmod data: cleanup in preparation for link array removal
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 8/9] ARM: OMAP4: hwmod data: uncomment some "excluded" hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/9] ARM: OMAP3: hwmod data: fix interfaces for the MMC hwmods
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 9/9] ARM: OMAP2+: hwmod: extend OCP_* register offsets from 16 to 32 bits
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/9] ARM: OMAP3: hwmod data: GPTIMER12 is attached to a separate interconnect
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/9] ARM: OMAP3: hwmod data: add DSS->L3 interconnect for 3430ES1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 00/10] OMAP/ASoC: Move and merge McBSP driver under ASoC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: OMAP: hwmod: add softreset delay field and OMAP4 data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• More randconfig OMAP build errors
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Latest OMAP4 build errors
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2 0/6] gpio/omap: Cleanup and adaptation to Device Tree
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Latest OMAP4 build errors
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Latest OMAP4 build errors
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 3/4] regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 4/4] MFD: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/4] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/4] regulator: twl: adapt twl-regulator driver to dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/4] twl-regulator DT adaptation and updates to add new regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• [PATCH] ARM: OMAP2+: Remove apply_uV constraints for fixed regulator
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Latest OMAP4 build errors
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v4 0/2] MFD: twl6040: Conversion to i2c driver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 1/2] MFD: twl-core: Detach twl6040 from the pmic mfd driver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 2/2] MFD: twl6040: Convert to i2c driver, and separate it from twl core
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: OMAP4 HDMI PHY bug work-around for stable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v2 09/10] ASoC: omap-mcbsp: Merge the omap_mcbsp_data into omap_mcbsp structure
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 10/10] ASoC: omap-mcbsp: Simplify DMA configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 04/10] ASoC: omap-mcbsp: Create a single driver for McBSP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 08/10] ASoC: omap-mcbsp: Cleanup of module probe/remove code
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 07/10] ASoC: OMAP McBSP: Remove redundant accessors
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 06/10] ASoC: OMAP: mcbsp.h: Clean up bit definitions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 05/10] ARM: OMAP: Do not register omap-mcbsp-dai device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 03/10] ASoC: OMAP: McBSP: Consolidate plat/mcbsp.h content
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 02/10] OMAP: mcbsp: Move core driver under sound/soc/omap
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 01/10] ARM: OMAP: mcbsp: Convert core driver to proper platform driver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 00/10] OMAP/ASoC: Move and merge McBSP driver under ASoC
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] OMAP4: panda: Correct cpu version check for 4430
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/6] ARM: OMAP4: core retention support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 6/8] ARM: OMAP2+: hwmod: provide a function to return the address space of the MPU RT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 5/8] ARM: OMAP2+: hwmod: ensure that SYSCONFIG bits are reprogrammed after a reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 4/8] ARM: OMAP2+: hwmod: revise hardreset behavior
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 7/8] ARM: OMAP2+: hwmod: add omap_hwmod_get_resource_byname()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 2/8] ARM: OMAP4: hwmod data: remove pseudo-hwmods associated with hardreset lines
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 3/8] ARM: OMAP2+: hwmod: reorganize and document the setup process
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 8/8] ARM: OMAP2+: timer: use a proper interface to get hwmod data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 1/8] ARM: OMAP2+: hwmod: control all hardreset lines attached to a hwmod
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 0/8] ARM: OMAP2+: hwmod/timer: first set of cleanups for 3.4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 4/6] gpio/omap: get rid of retrigger variable in gpio_irq_handler
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 2/6] gpio/omap: remove saved_wakeup field from struct gpio_bank
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 0/6] ARM: OMAP4: core retention support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 0/6] gpio/omap: Cleanup and adaptation to Device Tree
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/6] arm: omap4: prm: fix interrupt register offsets
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 6/6] gpio/omap: fix _set_gpio_irqenable implementation
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/6] gpio/omap: get rid of retrigger variable in gpio_irq_handler
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 3/6] gpio/omap: remove suspend_wakeup field from struct gpio_bank
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/6] gpio/omap: remove saved_wakeup field from struct gpio_bank
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: ARM: OMAP: patches for stable
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: ARM: OMAP: patches for stable
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: ARM: OMAP: patches for stable
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: OMAP PM constraint to disable OPP50
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [GIT PULL] ARM: OMAP: DTS updates
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: OMAP PM constraint to disable OPP50
  • From: Raghu <raghavendra.kh@xxxxxxxxx>
• Re: [RFC PATCH 1/2] of: Add generic device tree DMA helpers
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [GIT PULL] ARM: OMAP: IRQ domain support for INTC
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [GIT PULL] omap fixes for v3.3-rc4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: help: BeagleBoard xM RevC ethernet port
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] MFD: TWL 6030: make twl6030_irq_set_wake static
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] MFD: TWL 6030: clear IRQ status register only once
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] of: Add generic device tree DMA helpers
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• Re: [RFC PATCH 1/2] of: Add generic device tree DMA helpers
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• [PATCH v3 2/2] arm/dts: twl: Pass regulator data from dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 0/2] Device tree support for TWL regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: OMAP gpio handling
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• color phase rotation for ICC profile
  • From: Raffaele Recalcati <lamiaposta71@xxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• tps65930 microphone fails in 3.0.17
  • From: Maxim Podbereznyy <lisarden@xxxxxxxxx>
• OMAP gpio handling
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 4/6] ARM: OMAP3: Mark only those mmc devices which use gpio_cd, as deferred
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [GIT PULL] ARM: OMAP: DTS updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 4/6] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 6/6] arm/dts: OMAP3: Add gpio nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 5/6] arm/dts: OMAP4: Add gpio nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 3/6] gpio/omap: Add DT support to GPIO driver
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 1/6] gpio/omap: Remove bank->id information and misc cleanup
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 2/6] gpio/omap: Use devm_ API and add request_mem_region
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 4/6] ARM: OMAP3: Mark only those mmc devices which use gpio_cd, as deferred
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 0/6] gpio/omap: Cleanup and adaptation to Device Tree
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] Fix sprz319 erratum 2.1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP: DTS updates
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [GIT PULL] OMAP PM EMU fix for v3.3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] DSS Kconfig: Add some help, and fix a couple typoes.
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 8/8] ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] Documentation: Correct the location for the DSS2 driver.
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] mmc: omap: Enable Auto CMD12
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 3/4] mmc: omap: use runtime put sync in probe error patch
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 4/4] mmc: omap: context save after enabling runtime pm
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 0/4] mmc: omap: add autocmd12, DDR support and runtime fixes
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/4] mmc: omap: add DDR support to omap_hsmmc
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCHv2] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 6/6] ARM: OMAP3+: add prcm chain interrupts to the interrupt list
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 4/6] ARM: OMAP4: prm: fix interrupt register offsets
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 5/6] ARM: OMAP4: hwmod_data: Do not get DSP out of reset at boot time
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 1/6] ARM: OMAP4: suspend: Program all domains to retention
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 0/6] ARM: OMAP4 core retention support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/3] tty: serial: OMAP: block idle while the UART is transferring data in PIO mode
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 4/7] ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC PATCH 4/8] misc: emif: add basic infrastructure for EMIF driver
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC PATCH 4/8] misc: emif: add basic infrastructure for EMIF driver
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• [PATCH] mmc: start removing enable / disable API
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [PATCH] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 8/8] arm: omap3: prevent per_clkdm from attempting manual domain transitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 0/6] mmc: omap_hsmmc: Clean up use/abuse of pdev->id
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 6/6] ARM: OMAP3: Use .teardown of twl4030-gpio to clean board requests
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 3/6] mmc: omap_hsmmc: If probe fails, give out error messages
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 5/6] ARM: OMAP3: Modify omap_hsmmc_late_init to handle deleting mmc devices
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 4/6] ARM: OMAP3: Mark only those mmc devices which use gpio_cd, as deferred
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/6] mmc: omap_hsmmc: Make the driver support hotpluggable devices
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/6] ARM: OMAP: omap_device: Add omap_device_unregister()
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/6] Fix issues around twl4030-gpio used as a module
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 00/10] I2C updates
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH 00/10] I2C updates
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• RE: [GIT PULL] OMAP PM EMU fix for v3.3
  • From: <Madhusudhan.Gowda@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• ARM: OMAP: patches for stable
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 4/5] ARM: OMAP2+: gpmc: Use irq_alloc_descs instead of static IRQ range
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/5] ARM: OMAP: irqs: Delete irqs-44xx.h file
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2+: l3_noc: Remove references to static IRQ defines
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 0/7] omap hsmmc init cleanup and section warning fixes for v3.4 merge window
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 6/7] ARM: OMAP3: Use .teardown of twl4030-gpio to clean board requests
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 7/7] ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/7] ARM: OMAP: Fix devexit for dma when CONFIG_HOTPLUG is not set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/7] ARM: OMAP2+: Fix devexit for smartreflex when CONFIG_HOTPLUG is not set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/7] ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/7] ARM: OMAP2+: Fix board_mux section type conflict when OMAP_MUX is not set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/7] ARM: OMAP2+: Fix OMAP_HDQ_BASE build error
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/7] ARM: OMAP2+: Fix Kconfig dependencies for USB_ARCH_HAS_EHCI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/7] More omap2+ randconfig fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [GIT PULL] OMAP PM EMU fix for v3.3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP: Remove plat/io.h by moving it into mach/io.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: OMAP2+: Move most of plat/io.h into local iomap.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: OMAP1: Move most of plat/io.h into local iomap.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/8] ARM: OMAP1: Move 16xx GPIO system clock to platform init code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap fixes for v3.3-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC PATCH] gpio/omap: Fix IRQ handling for SPARSE_IRQ
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 5/5] ARM: OMAP: irqs: Set NR_IRQS to NR_IRQS_LEGACY for CONFIG_SPARSE_IRQ
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 3/5] ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 4/5] ARM: OMAP2+: gpmc: Use irq_alloc_descs instead of static IRQ range
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 2/5] ARM: OMAP: irqs: Delete irqs-44xx.h file
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 1/5] ARM: OMAP2+: l3_noc: Remove references to static IRQ defines
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 0/5] ARM: OMAP: Fix SPARSE_IRQ on OMAP4 - Episode I
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH] ARM: OMAP2+: Set Kconfig dependencies for PROC_DEVICETREE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] ARM: OMAP2: fix mailbox init code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: enable Bluetooth on the PandaBoard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm/dts: OMAP3: Add mmc controller nodes and board data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] omap hsmmc init cleanup and section warning fixes for v3.4 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH RESEND] ARM: OMAP: enable Bluetooth on the PandaBoard
  • From: Mircea Gherzan <mgherzan@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: fix mailbox init code
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: fix mailbox init code
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• Re: [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iommu/omap: fix NULL pointer dereference
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• RE: [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: "Elaidi, Djamil" <d-elaidi@xxxxxx>
• Re: [RFC PATCH 1/2] of: Add generic device tree DMA helpers
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC PATCH 1/2] of: Add generic device tree DMA helpers
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 0/2] mfd: omap-usb-host: Minor omap-usb host fixes
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] regulator: twl: adapt twl-regulator driver to dt
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] MFD: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: enable Bluetooth on the PandaBoard
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv5 03/14] arm: omap3+: voltage: parameter segregation
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH v2 6/7] ARM: OMAP3: Use .teardown of twl4030-gpio to clean board requests
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [GIT PULL] adding rpmsg and remoteproc to 3.4
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [GIT PULL] adding rpmsg and remoteproc to 3.4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 5/7] ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v3] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH] cpufreq: OMAP: specify range for voltage scaling
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/6] arm: omap4: suspend: Program all domains to RET
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH 6/6] arm: omap3+: add prcm chain interrupts to the interrupt list
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 4/6] arm: omap4: prm: fix interrupt register offsets
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 5/6] ARM: OMAP4: suspend: Do not get dsp/tesla out of reset
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/6] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Tero Kristo <t-kristo@xxxxxx>