Hi Rajendra, On 02/27/2012 12:35 PM, Rajendra Nayak wrote: > Re-sending on top of Tero's changes which are already > in -next and the one which adds support for twl6030 > vdd1/2/3 SMPS [1]. Would you be able to add support for V1V8, V2V1 SMPS supplies in twl6030? These regulators are need on SDP4430, and PandaBoards for the twl6040 audio codec. I have sent a series to add this support: http://marc.info/?l=linux-omap&m=132886849202915&w=2 Thanks, Péter > v3 has mainly 2 differences from v2 > -1- TWL driver now uses just one table for both dt and > non-dt based lookup for driver data. > -2- All common regulator nodes for twl4030 and twl6030 are > now defined in the twl4030.dtsi and twl6030.dtsi instead of > repeating the nodes in all board files, which also means > the patch ('arm/dts: twl: Pass regulator data from dt') > has a dependency with the series from Benoit which adds the > twl4030.dtsi and twl6030.dtsi files[2]. > > I have tested the patches on omap4panda and omap3beagle boards. > > [1] http://marc.info/?l=linux-omap&m=133009693905864&w=2 > [2] git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git > for_3.4/dt_i2c_twl > > Rajendra Nayak (2): > regulator: twl: adapt twl-regulator driver to dt > arm/dts: twl: Pass regulator data from dt > > .../bindings/regulator/twl-regulator.txt | 66 +++++ > arch/arm/boot/dts/omap3-beagle.dts | 6 + > arch/arm/boot/dts/twl4030.dtsi | 18 ++ > arch/arm/boot/dts/twl6030.dtsi | 60 +++++ > drivers/regulator/twl-regulator.c | 259 +++++++++++++------- > 5 files changed, 322 insertions(+), 87 deletions(-) > create mode 100644 Documentation/devicetree/bindings/regulator/twl-regulator.txt > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
