On Friday 24 February 2012 03:46 PM, T Krishnamoorthy, Balaji wrote:
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 29f4589..9204f60 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -25,6 +25,11 @@ serial1 =&uart2; serial2 =&uart3; serial3 =&uart4; + mmc1 =&mmc1; + mmc2 =&mmc2; + mmc3 =&mmc3; + mmc4 =&mmc4; + mmc5 =&mmc5; }; cpus { @@ -155,5 +160,31 @@ #size-cells =<0>; ti,hwmods = "i2c4"; }; + + mmc1: mmc@1 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + }; + + mmc2: mmc@2 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + };Hi Rajendra, Is there a way to control the device registration order, eMMC connected to mmc2 needs to be registered as /dev/mmcblk0p ... irrespective of whether SD card is mount or not on mmc1 card slot. So that bootargs would not have to be modified when filesystem is on eMMC.
I don't know if we can, but even if we could, we take care of the same bootargs working on two boards (say sdp and panda) *if* on sdp I have my filesystem on eMMC and on panda I have it on external card. What happens if I want to use my filesystem on both boards on external card?
+ + mmc3: mmc@3 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + }; + + mmc4: mmc@4 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc4"; + }; + + mmc5: mmc@5 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc5"; + }; }; }; -- 1.7.1
-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
