Hi,
On Thu, Mar 01, 2012 at 12:36:57PM -0800, Kevin Hilman wrote:
> Matt Porter <mporter@xxxxxx> writes:
>
> > This fixes smsc911x support on platforms using gpmc_smsc911x_init().
> >
> > Commit c7e963f6888816 (net/smsc911x: Add regulator support) added
> > the requirement that platforms provide vdd33a and vddvario supplies.
> >
> > Signed-off-by: Matt Porter <mporter@xxxxxx>
>
> [...]
>
> > /*
> > * Initialize smsc911x device connected to the GPMC. Note that we
> > * assume that pin multiplexing is done in the board-*.c file,
> > @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
> >
> > gpmc_cfg = board_data;
> >
> > + ret = platform_device_register(&gpmc_smsc911x_regulator);
> > + if (ret < 0) {
> > + pr_err("Unable to register smsc911x regulators: %d\n", ret);
> > + return;
> > + }
> > +
>
> Boards that have more than one instance of the smsc911x (OMAP3/Overo)
> barf here because of trying to register the same device twice.
>
> We need something like the patch below to make Overo boot again.
>
> Kevin
>
>
>
> From 4114dea2fb897ab75d05eaa943d29454034fc025 Mon Sep 17 00:00:00 2001
> From: Kevin Hilman <khilman@xxxxxx>
> Date: Thu, 1 Mar 2012 12:30:42 -0800
> Subject: [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulators once
>
> commit e4b0b2cbbb (ARM: OMAP2+: gpmc-smsc911x: add required smsc911x
> regulators) added regulators which are registered during
> gpmc_smsc911x_init(). However, some platforms (OMAP3/Overo) have more
> than one instance of the SMSC911x and result in attempting to register
> the same regulator more than once which causes a panic(). Fix this by
> tracking the regulator registration ensuring only a single device is
> registered.
>
> Cc: Matt Porter <mporter@xxxxxx>
> Signed-off-by: Kevin Hilman <khilman@xxxxxx>
> ---
> arch/arm/mach-omap2/gpmc-smsc911x.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
> index bbb870c..95e6c7d 100644
> --- a/arch/arm/mach-omap2/gpmc-smsc911x.c
> +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
> @@ -88,6 +88,8 @@ static struct platform_device gpmc_smsc911x_regulator = {
> },
> };
>
> +static bool regulator_registered;
> +
> /*
> * Initialize smsc911x device connected to the GPMC. Note that we
> * assume that pin multiplexing is done in the board-*.c file,
> @@ -101,10 +103,14 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
>
> gpmc_cfg = board_data;
>
> - ret = platform_device_register(&gpmc_smsc911x_regulator);
> - if (ret < 0) {
> - pr_err("Unable to register smsc911x regulators: %d\n", ret);
> - return;
> + if (!regulator_registered) {
> + ret = platform_device_register(&gpmc_smsc911x_regulator);
> + if (ret < 0) {
> + pr_err("Unable to register smsc911x regulators: %d\n",
> + ret);
> + return;
> + }
> + regulator_registered = true;
Wow, this is quite a hack. Is the regulator part of the SMSC911x device
or is it outside ? If it's outside the SMSC91xx (which I believe it is)
there should be a regulator driver instead of this hack. For boards
which don't provide such a regulator (and tie the supply pin to some
constant voltage source) there should be a constant regulator supplying
the pin. But this patch is quite hacky.
--
balbi
Attachment:
signature.asc
Description: Digital signature
