Add an ethernet SPI chip in the OMAP4 SDP/Blaze board DTS file.
Add a fixed regulator node controlled by a GPIO line to supply
the ethernet chip.
Based on original code from Rajendra.
Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
Acked-by: Rob Herring <rob.herring@xxxxxxxxxxx>
---
arch/arm/boot/dts/omap4-sdp.dts | 30 +++++++++++++++++++++---------
1 files changed, 21 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 066e28c..6584109 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -13,17 +13,29 @@
model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ vdd_eth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 16 0>; /* gpio line 48 */
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&mcspi1 {
+ eth@0 {
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2>; /* gpio line 34 */
+ vdd-supply = <&vdd_eth>;
+ };
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
