Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- [PATCH v3 4/7] ARM: OMAP2+: omap2plus_defconfig: Add matrix-keypad support
- From: AnilKumar Ch <anilkumar@xxxxxx>
- RE: [PATCH v4 0/4] pm: Add power off control
- From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
- RE: [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node
- From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
- RE: [PATCH 2/3] ARM: dts: AM33XX: Add d_can instances to aliases
- From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
- RE: [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
- From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
- RE: [PATCH 0/7] ARM: OMAP2+: AM33XX: Enable few drivers in omap2plus_defconfig
- From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
- Re: [PATCH 1/3] mtd nand : onfi need to be probed in 8 bits mode
- From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
- Re: [PATCH v2] ARM: OMAP3: cm-t3517: add MMC support
- From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
- Querry on UART wakeup on Linux 3.8-rc1
- From: <Madhusudhan.Gowda@xxxxxxxxxxxxxx>
- Re: [RFC v2 01/18] mailbox: OMAP2+: Add support for AM33XX
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] ARM: OMAP2+: sparse & PRCM fixes for v3.8-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] ARM: OMAP: SRAM: resolve sparse warnings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: OMAP: 32k counter: resolve sparse warnings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [RFC v2 03/18] memory: emif: Move EMIF related header file to include/linux/
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 16/18] ARM: OMAP2+: AM33XX: Basic suspend resume support
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 15/18] ARM: OMAP2+: AM33XX: Add assembly code for PM operations
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- Re: [PATCH 2/3] ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [RFC v2 18/18] ARM: OMAP2+: AM33XX: Hookup AM33XX PM code into OMAP builds
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 17/18] ARM: OMAP2+: AM33XX: Select Mailbox when PM is enabled
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 14/18] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- Re: [RESEND PATCH] leds: leds-gpio: set devm_gpio_request_one() flags correctly
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [RFC v2 13/18] ARM: OMAP2+: AM33XX: timer: Interchance clkevt and clksrc timers
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 12/18] ARM: OMAP2+: timer: Add suspend-resume callbacks for clockevent device
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 11/18] ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 10/18] ARM: OMAP2+: AM33XX: Update the hardreset API
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 09/18] ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 08/18] ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 07/18] ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 06/18] ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 05/18] ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 04/18] ARM: OMAP2+: AM33XX: CM: Get rid of unncessary header inclusions
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 02/18] mailbox: Add an API for flushing the FIFO
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 01/18] mailbox: OMAP2+: Add support for AM33XX
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [RFC v2 00/18] ARM: OMAP2+: AM33XX: Add suspend-resume support
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- Re: [PATCH] ARM: dts: omap3-igep: Add fixed always-on regulators to common dtsi file
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 00/10] MFD: twl-core: Cleanup part 2 for 3.9
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 01/10] mfd: twl-core: Clean up module id lookup and definitions
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 06/10] mfd: twl-core: Do not create dummy pdata when booted with DT
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 02/10] mfd: twl-core: No need to check for invalid subchip ID
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 08/10] mfd: twl-core: Collect global variables behind one private structure (global)
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 07/10] mfd: twl-core: Move 'inuse' check early at probe time
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 03/10] mfd: twl-core: Use the lookup table to find the correct subchip for the modules
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 09/10] mfd: twl-core: Remove no longer valid comment regarding to write buffer size
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 10/10] mfd: twl-core: Move twl_i2c_read/write_u8 to header as inline function
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 05/10] mfd: twl-core: Do not try to call legacy mfd add_children() when booted with DT
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 04/10] mfd: twl-core: Allocate twl_modules dynamically
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 6/6] ARM: OMAP: sdp3430: Audio support via the common omap-twl4030 machine driver
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 5/6] ARM: OMAP: zoom: Audio support via the common omap-twl4030 machine driver
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 4/6] ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 3/6] ARM: OMAP2+: twl-common: Add default twl4030 audio configuration
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 2/6] ARM: OMAP: zoom: Zoom2 does not have extmute functionality
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/6] ARM: OMAP: 3430sdp: Enable extmute functionality for audio
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 0/6] ARM: OMAP3: Audio support update for omap-twl4030
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 8/8] ASoC: OMAP: Remove obsolete machine drivers for Zoom2 and SDP3430
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 7/8] ASoC: omap-twl4030: Add support for routing, voice port and jack detect
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 5/8] ASoC: twl4030: Configure extmute pinmux when the dedicated pin is in use
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 6/8] ASoC: sdp3430: No need to configure pin mux for extmute
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 4/8] ASoC: twl4030: Convert MICBIAS to SUPPLY widget
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 3/8] ASoC: sdp3430: No need to configure the Voice port anymore
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 2/8] ASoC: zoom2: No need to configure the Voice port anymore
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/8] ASoC: twl4030: Correct the support for Voice port
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 0/8] ASoC: OMAP-twl4030: Add support for more3 boards
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 1/3] ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH 2/3] ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH] ARM: OMAP AM3517/05: hwmod data: block WFI when EMAC active
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 3/3] ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/3] ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/3] ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/3] ARM: OMAP2+: PM/hwmod: clean up some WFI-related code
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] hwspinlock/core: Add testing capabilities
- From: Ido Yariv <ido@xxxxxxxxxx>
- Re: [PATCH] hwspinlock/core: Add testing capabilities
- From: Ido Yariv <ido@xxxxxxxxxx>
- [PATCH] omap_vout: Fix mode build warning
- From: Peter Meerwald <pmeerw@xxxxxxxxxx>
- video_mode_to_dss_mode
- From: Peter Meerwald <pmeerw@xxxxxxxxxx>
- Re: [RFC] drm/lcdc: add TI LCD Controller DRM driver
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] arm :omap :DMA: fix a bug on reserving the omap SDMA channels
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH] ARM: dts: omap3-igep: Add fixed always-on regulators to common dtsi file
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] arm :omap :DMA: fix a bug on reserving the omap SDMA channels
- [PATCH] ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re:[PATCH] hwspinlock/core: Add testing capabilities
- From: "steve.zhan" <zhanzhenbo@xxxxxxxxx>
- [no subject]
- From: "steve.zhan" <zhanzhenbo@xxxxxxxxx>
- Re: [PATCH v2] ARM: sh7372: fix cache clean / invalidate order
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [GIT PULL] ARM: OMAP2+: sparse & PRCM fixes for v3.8-rc1
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] arm: omap: Remove apollon board support
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- OMAP baseline test results for v3.8-rc1
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH v2] ARM: sh7372: fix cache clean / invalidate order
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 07/10] crypto: omap-aes - Add Device Tree Support
- From: Russ Dill <russ.dill@xxxxxxxxx>
- [PATCH v5] watchdog: introduce retu_wdt driver
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v2 0/2] cpts fixes for v3.8-rc2
- From: David Miller <davem@xxxxxxxxxxxxx>
- RE: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 09/10] ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- RE: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- RE: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- RE: [PATCH 02/12] ARM: OMAP2+: PM: introduce power domains functional states
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- [PATCH] arm: omap: Remove apollon board support
- From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/2] cpts fixes for v3.8-rc2
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: [PATCH 2/3] ARM: OMAP AM33xx: hwmod data: resolve sparse warnings
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: OMAP: 32k counter: resolve sparse warnings
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- [PATCH 1/2] staging: tidspbridge: fix breakages due to CM reorganization
- From: Omar Ramirez Luna <omar.ramirez@xxxxxxxxxx>
- [PATCH 2/2] staging: tidspbridge: use prepare/unprepare on dsp clocks
- From: Omar Ramirez Luna <omar.ramirez@xxxxxxxxxx>
- [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
- From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
- [PATCH v2 2/2] cpts: fix a run time warn_on.
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- [PATCH v2 1/2] cpts: fix build error by removing useless code.
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- [PATCH v2 0/2] cpts fixes for v3.8-rc2
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- Re: [PATCH 2/2] cpts: fix a run time warn_on.
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- [PATCH 2/3] ARM: OMAP AM33xx: hwmod data: resolve sparse warnings
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 3/3] ARM: OMAP: SRAM: resolve sparse warnings
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/3] ARM: OMAP: 32k counter: resolve sparse warnings
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/3] ARM: OMAP: resolve sparse warnings with v3.8-rc1
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
- From: Daniel Mack <zonque@xxxxxxxxx>
- Re: [PATCH 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- Re: [PATCH 1/3] mtd nand : onfi need to be probed in 8 bits mode
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/3] arm: omap2: gpmc-onenand: drop __init annotation
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] mtd: omap-onenand: pass device_node in platform data
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/3] OMAP GPMC OneNAND DT bindings
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- Re: [PATCH] arm: omap3: igep0020: Add console default kernel arguments
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- Re: reset handling in am335x hwmod data
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] watchdog: omap_wdt: eliminate unused variable and a compiler warning
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] watchdog: twl4030_wdt: add DT support
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH] watchdog: omap_wdt: eliminate unused variable and a compiler warning
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] arm: omap3: igep0020: Add console default kernel arguments
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 13/15] ARM: AM33XX: Add aes0 crypto clock data
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 2/2] cpts: fix a run time warn_on.
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: Testing the powerdomain changes
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] musb: omap2430: fix the readiness check in omap_musb_mailbox
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] musb: omap2430: fix the readiness check in omap_musb_mailbox
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH 2/2] cpts: fix a run time warn_on.
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- [PATCH 1/2] cpts: fix build error by removing useless code.
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- [PATCH 0/2] cpts fixes for v3.8-rc2
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- Re: [PATCH] arm: omap3: igep0020: Add console default kernel arguments
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- Re: [RFC 3/5] ARM: CTI: Convert CTI helpers to AMBA bus driver
- From: Pratik Patel <pratikp@xxxxxxxxxxxxxx>
- Re: [RFC 3/5] ARM: CTI: Convert CTI helpers to AMBA bus driver
- From: Pratik Patel <pratikp@xxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP1: fix USB configuration use-after-release
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Omar Ramirez Luna <omar.ramirez@xxxxxxxxxx>
- Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] arm: omap3: igep0020: Add console default kernel arguments
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- [PATCH 9/8] ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [pandaboard] device tree does not work
- From: Sukumar Ghorai <ghorai.sukumar@xxxxxxxxx>
- Re: [RESEND PATCH] leds: leds-gpio: set devm_gpio_request_one() flags correctly
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- [PATCH 10/10] crypto: omap-aes - Add CTR algorithm Support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 09/10] crypto: omap-aes - Add OMAP4/AM33XX AES Support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 07/10] crypto: omap-aes - Add Device Tree Support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 04/10] crypto: omap-aes - Add suspend/resume support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 05/10] crypto: omap-aes - Add code to use dmaengine API
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 06/10] crypto: omap-aes - Remove usage of private DMA API
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 08/10] crypto: omap-aes - Convert to dma_request_slave_channel_compat()
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 03/10] crypto: omap-aes - Convert to use pm_runtime API
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 02/10] crypto: omap-aes - Don't reset controller for every operation
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 01/10] crypto: omap-aes - Remmove unnecessary pr_info noise
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 00/10] crypto: omap-aes - Updates & New Functionality
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 8/9] crypto: omap-sham - Add OMAP4/AM33XX SHAM Support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 9/9] crypto: omap-sham - Add SHA224 and SHA256 Support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 6/9] crypto: omap-sham - Add Device Tree Support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 5/9] crypto: omap-sham - Remove usage of private DMA API
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 4/9] crypto: omap-sham - Add code to use dmaengine API
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 7/9] crypto: omap-sham - Convert to dma_request_slave_channel_compat()
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 2/9] crypto: omap-sham - Convert to use pm_runtime API
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 3/9] crypto: omap-sham - Add suspend/resume support
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 1/9] crypto: omap-sham - Remove unnecessary pr_info noise
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 0/9] crypto: omap-sham - Updates & New Functionality
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/8] Flip on multiplatform support for omap2plus for v3.9
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [pandaboard] device tree does not work
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 14/15] ARM: AM33XX: hwmod: Update and uncomment AES0 module data
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 12/15] ARM: OMAP2+: Only manually add hwmod data when DT not used.
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 08/15] ARM: dts: Add SHAM data and documentation for AM33XX
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 13/15] ARM: AM33XX: Add aes0 crypto clock data
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 11/15] ARM: OMAP2+: Remove unnecessary message when no AES IP is present
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 10/15] ARM: OMAP3xxx: hwmod: Convert AES crypto device data to hwmod
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 15/15] ARM: dts: Add AES data and documentation for AM33XX
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 04/15] ARM: OMAP2+: Remove unnecessary message when no SHA IP is present
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 09/15] ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 06/15] ARM: AM33XX: Add sha0 crypto clock data
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 05/15] ARM: OMAP2+: Only manually add hwmod data when DT not used.
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 07/15] ARM: AM33XX: hwmod: Update and uncomment SHA0 module data
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 03/15] ARM: OMAP3xxx: hwmod: Convert SHAM crypto device data to hwmod
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 01/15] ARM: OMAP2xxx: hwmod: Convert SHAM crypto device data to hwmod
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 00/15] OMAP SHAM & AES Crypto Updates
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- [PATCH 02/15] ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module
- From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
- Re: [PATCH] arm: omap3: igep0020: Add console default kernel arguments
- From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
- reset handling in am335x hwmod data
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [RESEND PATCH] leds: leds-gpio: set devm_gpio_request_one() flags correctly
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH] omap: iommu: fixing NULL pointer return value
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- [PATCH] omap: iommu: fixing NULL pointer return value
- From: Guillaume Aubertin <g-aubertin@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 0/8] Flip on multiplatform support for omap2plus for v3.9
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- Re: [PATCH 1/9] mailbox: OMAP: introduce mailbox framework
- From: Loic PALLARDY <loic.pallardy@xxxxxx>
- Re: [PATCH 5/9] mailbox: change protection mechanisms
- From: Loic PALLARDY <loic.pallardy@xxxxxx>
- RE: [PATCH 1/9] mailbox: OMAP: introduce mailbox framework
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- Re: [PATCH 4/9] mailbox: create opened message type
- From: Loic PALLARDY <loic.pallardy@xxxxxx>
- RE: [PATCH 5/9] mailbox: change protection mechanisms
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- RE: [PATCH 4/9] mailbox: create opened message type
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [PATCH 1/9] mailbox: OMAP: introduce mailbox framework
- From: Loic PALLARDY <loic.pallardy@xxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Loic PALLARDY <loic.pallardy@xxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH 0/8] Flip on multiplatform support for omap2plus for v3.9
- From: Lokesh Vutla <lokeshvutla@xxxxxx>
- Re: [PATCH 0/8] Flip on multiplatform support for omap2plus for v3.9
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/8] Flip on multiplatform support for omap2plus for v3.9
- From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
- Re: [PATCH 1/1] Fix sprz319 erratum 2.1
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: correct precedence of operators
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Add missing enable/disable for EMU clock
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] ARM: OMAP3: Add missing enable/disable for EMU clock
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
- From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
- Re: omap_hsmmc: SDIO IRQ on AM335x family
- From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/9] mailbox: rename omap_mbox in mailbox
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: correct precedence of operators
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Olof Johansson <olof@xxxxxxxxx>
- [PATCH] mmc: omap_hsmmc: correct precedence of operators
- From: Sasha Levin <sasha.levin@xxxxxxxxxx>
- Re: [PATCH] lib: atomic64: Initialize locks statically to fix early users
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/9] drivers: mailbox: framework creation
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] gpio/omap: implement irq_enable/disable using mask/unmask.
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [GIT PULL] two trivial omap build error fixes for v3.8 merge window
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL] two trivial omap build error fixes for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] two trivial omap build error fixes for v3.8 merge window
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH 0/8] Flip on multiplatform support for omap2plus for v3.9
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] arm: omap3: igep0020: Add console default kernel arguments
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] Fix sprz319 erratum 2.1
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [GIT PULL] two trivial omap build error fixes for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel
- From: Vinod Koul <vkoul@xxxxxxxxxxxxx>
- Re: [GIT PULL] two trivial omap build error fixes for v3.8 merge window
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v2 3/3] gpio: twl4030: TODO comment to remove the PWMA/B (LEDA/B) handling
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- [PATCH v3] gpio: twl4030: Cache the direction and output states in private data
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v2 3/3] gpio: twl4030: TODO comment to remove the PWMA/B (LEDA/B) handling
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] lib: atomic64: Initialize locks statically to fix early users
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- RE: [PATCH v2] ARM: OMAP2: hwmod: Fix "register offset NULL check" bug
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: BUG: spinlock bad magic on CPU#0 on BeagleBone
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- RE: BUG: spinlock bad magic on CPU#0 on BeagleBone
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- Re: [PATCH 0/2] drop plat/cpu.h for omap2plus
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: BUG: spinlock bad magic on CPU#0 on BeagleBone
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH] gpio/omap: implement irq_enable/disable using mask/unmask.
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- RE: BUG: spinlock bad magic on CPU#0 on BeagleBone
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- RE: [PATCH v2] ARM: OMAP2: hwmod: Fix "register offset NULL check" bug
- From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
- Re: [RFC/RFT] ARM: OMAP1: fix USB host on 1710
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP GPIO - don't wake from suspend unless requested.
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH v2 2/3] gpio: twl4030: Cache the direction and output states in private data
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- [RFC/RFT] ARM: OMAP1: fix USB host on 1710
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH] ARM: OMAP1: nokia770: enable CBUS/Retu
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH v2 2/3] gpio: twl4030: Cache the direction and output states in private data
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] gpio: twl4030: TODO comment to remove the PWMA/B (LEDA/B) handling
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH v2 1/3] gpio: twl4030: Introduce private structure to store variables needed runtime
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH v2 2/3] gpio: twl4030: Cache the direction and output states in private data
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: BUG: spinlock bad magic on CPU#0 on BeagleBone
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- [PATCH 8/8] ARM: OMAP2+: Add minimal support for booting vexpress
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 6/8] ARM: OMAP2+: Disable code that currently does not work with multiplaform
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 7/8] ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/8] ARM: OMAP2+: Add multiplatform debug_ll support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/8] ARM: OMAP: Fix dmaengine init for multiplatform
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/8] ARM: OMAP: Fix i2c cmdline initcall for multiplatform
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/8] ARM: OMAP2+: Use omap initcalls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/8] ARM: OMAP2+: Limi omap initcalls to omap only on multiplatform kernels
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/8] Flip on multiplatform support for omap2plus for v3.9
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: R Sricharan <r.sricharan@xxxxxx>
- [GIT PULL] two trivial omap build error fixes for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH V6 2/2] dmaengine: add helper function to request a slave DMA channel
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH] ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: PRM: Correct reset source map
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: BUG: spinlock bad magic on CPU#0 on BeagleBone
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP: Fix build breakage due to missing include in i2c.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Luciano Coelho <coelho@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Felipe Balbi <balbi@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v4 3/3] ARM/dts: omap3: Add support for IGEP COM Module
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v4 2/3] ARM/dts: omap3: Add support for IGEPv2 board
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v4 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v4 0/3] ARM/dts: omap3: Add DT support for IGEP devices
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: downscaling YUV fails
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Felipe Balbi <balbi@xxxxxx>
- Re: downscaling YUV fails
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH 1/1] ARM: dts: omap3-igep: remove VSIM regulator
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: downscaling YUV fails
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/1] ARM: dts: omap3-igep: remove VSIM regulator
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 2/2] ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 1/2] ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: downscaling YUV fails
- From: Archit Taneja <archit@xxxxxx>
- Re: downscaling YUV fails
- From: Peter Meerwald <pmeerw@xxxxxxxxxx>
- Re: downscaling YUV fails
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: downscaling YUV fails
- From: Archit Taneja <archit@xxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: downscaling YUV fails
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: downscaling YUV fails
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Luciano Coelho <coelho@xxxxxx>
- BUG: spinlock bad magic on CPU#0 on BeagleBone
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: downscaling YUV fails
- From: Peter Meerwald <pmeerw@xxxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Luciano Coelho <coelho@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Luciano Coelho <coelho@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: downscaling YUV fails
- From: Archit Taneja <archit@xxxxxx>
- RE: [PATCH] ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP4: PRM: Correct reset source map
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH] ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH] ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Luciano Coelho <coelho@xxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- downscaling YUV fails
- From: Peter Meerwald <pmeerw@xxxxxxxxxx>
- [PATCH] ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] staging: tidspbridge: Fix build breakage due to splitting CM functions.
- From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: dts: omap3-igep: remove VSIM regulator
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [PATCH V2 2/6] OMAPDSS: DISPC: Move DISPC specific dss_reg_fields to dispc_features
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: [PATCH V2 4/6] OMAPDSS: DSI: Move DSI specific reg_fields to dsi_feats
- From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- RE: [PATCH 1/1] ARM: OMAP: Fix build breakage due to missing include in i2c.c
- From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
- [PATCH 1/1] ARM: OMAP: Fix build breakage due to missing include in i2c.c
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- [PATCH 1/1] ARM: OMAP: Fix build breakage due to missing include in i2c.c
- From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
- Re: [PATCH v2] ARM: OMAP2: hwmod: Fix "register offset NULL check" bug
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] mach-omap2/board-igep0020.c: Fix reboot problem
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH 1/9] mailbox: OMAP: introduce mailbox framework
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: About 1-Wire driver of OMAP4
- From: HermanMao(毛宏仁) <Herman516@xxxxxxxxxxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- [PATCH 0/9] drivers: mailbox: framework creation
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 2/9] mailbox: split internal header from API header
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 9/9] mailbox: create dbx500 mailbox driver
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 7/9] mailbox: add IRQF_NO_SUSPEND flag
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 4/9] mailbox: create opened message type
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 8/9] mailbox: add no_irq send message
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 5/9] mailbox: change protection mechanisms
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 6/9] mailbox: add shared memory mailbox type
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 3/9] mailbox: rename omap_mbox in mailbox
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH 1/9] mailbox: OMAP: introduce mailbox framework
- From: Loic Pallardy <loic.pallardy-ext@xxxxxxxxxxxxxx>
- [PATCH v2] ARM: OMAP2: hwmod: Fix "register offset NULL check" bug
- From: Hebbar Gururaja <gururaja.hebbar@xxxxxx>
- RE: [PATCH] ARM: OMAP2: hwmod: Fix "register offset NULL check" bug
- From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
- Re: [PATCH] ARM: OMAP2: hwmod: Fix "register offset NULL check" bug
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH] ARM: OMAP2: hwmod: Fix "register offset NULL check" bug
- From: Hebbar Gururaja <gururaja.hebbar@xxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: 32kHz clock removal causes problems omap_hsmmc
- From: Felipe Balbi <balbi@xxxxxx>
- Re: omap DSS fails with tft410 driver panel?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [GIT PULL 1/2] omap fixes for v3.8 merge window
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL] ARM: OMAP: clock/cpuidle: fixes for the v3.8 merge window
- From: Olof Johansson <olof@xxxxxxxxx>
- [PATCH v3 5/5] ARM: OMAP4+: HDMI: Refine the DMA port resource for audio
- From: Ricardo Neri <rneri@xxxxxxxxxxxxxx>
- [PATCH v3 4/5] ARM: OMAP4+: HDMI: Relocate the device for audio interface
- From: Ricardo Neri <rneri@xxxxxxxxxxxxxx>
- [PATCH v3 1/5] ARM: OMAP4+: HDMI: Rename platform devices for ASoC drivers
- From: Ricardo Neri <rneri@xxxxxxxxxxxxxx>
- [PATCH v3 2/5] ARM: OMAP4: Assign IDs to DSS HDMI devices
- From: Ricardo Neri <rneri@xxxxxxxxxxxxxx>
- [PATCH v3 3/5] ARM4: OMAP4+: HDMI: Relocate devices for audio codec and card
- From: Ricardo Neri <rneri@xxxxxxxxxxxxxx>
- [PATCH v3 0/5] ARM: OMAP4+: HDMI: Update platform devices for audio
- From: Ricardo Neri <rneri@xxxxxxxxxxxxxx>
- Re: [GIT PULL 1/2] omap fixes for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] ARM: OMAP: clock/cpuidle: fixes for the v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: About 1-Wire driver of OMAP4
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: invalid references to vram.h
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH] ARM: OMAP4: clock/hwmod data: remove MODULEMODE entries in mux + gate combos
- From: Paul Walmsley <paul@xxxxxxxxx>
- invalid references to vram.h
- From: Carlos Hernandez <ceh@xxxxxx>
- Re: [PATCH v4 16/23] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: PRM: Correct reset source map
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP: DSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH] ARM: OMAP4: clock/hwmod data: start to remove some IP block control "clocks"
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] ARM: OMAP4: PRM: Correct reset source map
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH] ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH] ARM: OMAP4: PRM: Correct PRM_RSTST and PRM_RSTTIME registers shifts
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH] ARM: OMAP4: PRM: Correct PRM_RSTST and PRM_RSTTIME registers shifts
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- AM33xx not booting here after d01e4afd
- From: Paul Walmsley <paul@xxxxxxxxx>
- [GIT PULL 1/2] omap fixes for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] ARM: OMAP: clock/cpuidle: fixes for the v3.8 merge window
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [GIT PULL] omap fixes and cleanups for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] omap fixes and cleanups for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP4: PRCM: Fix incorrect read of reset sources
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP3: PRCM: Fix incorrect read of reset sources
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [GIT PULL] omap fixes and cleanups for v3.8 merge window
- From: Felipe Balbi <balbi@xxxxxx>
- [GIT PULL] omap fixes and cleanups for v3.8 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH V2 0/2] ARM: dts: Add PMU support for OMAP2+
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH V2 1/2] ARM: OMAP2+: Prepare for device-tree PMU support
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH V2 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH V2 0/2] ARM: dts: Add PMU support for OMAP2+
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RESEND PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 1/2] ARM: OMAP3: PRCM: Fix incorrect read of reset sources
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- [PATCH 2/2] ARM: OMAP4: PRCM: Fix incorrect read of reset sources
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
- Re: [PATCH 1/2] ARM: OMAP: Split vrfb.c to remove last remaining cpu_is_omap usage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RESEND PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RESEND PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [RFC] drm/lcdc: add TI LCD Controller DRM driver
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH v4 16/23] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: MUSB-HDRC Gadget driving VBUS inappropriately
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v4 16/23] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC] drm/lcdc: add TI LCD Controller DRM driver
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP2+: Drop plat/cpu.h for omap2plus
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [RFC] drm/lcdc: add TI LCD Controller DRM driver
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC] drm/lcdc: add TI LCD Controller DRM driver
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [patch] OMAPDSS: reading past end of array in dispc_dump_regs()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH V2 2/6] OMAPDSS: DISPC: Move DISPC specific dss_reg_fields to dispc_features
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH V2 4/6] OMAPDSS: DSI: Move DSI specific reg_fields to dsi_feats
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [patch] OMAPDSS: reading past end of array in dispc_dump_regs()
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH] OMAP: DSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 2/2] ARM: OMAP2+: Drop plat/cpu.h for omap2plus
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH] gpio/omap: implement irq_enable/disable using mask/unmask.
- From: Andreas Fenkart <andreas.fenkart@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP: Split vrfb.c to remove last remaining cpu_is_omap usage
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 2/2] ARM: OMAP2+: Drop plat/cpu.h for omap2plus
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH v4 16/23] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH v2] New Nokia RX-51 power supply battery driver
- From: Anton Vorontsov <anton.vorontsov@xxxxxxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 2/2] spi: devicetree: add support for loopback mode
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP2+: Drop remaining plat/cpu.h usage where possible
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] ARM: OMAP2+: Drop plat/cpu.h for omap2plus
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] ARM: OMAP: Split vrfb.c to remove last remaining cpu_is_omap usage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/2] drop plat/cpu.h for omap2plus
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP2+: common: remove use of vram
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/1] ARM: OMAP2+: common: remove use of vram
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Dave Jones <davej@xxxxxxxxxx>
- Re: [GIT PULL] fbdev changes for 3.8
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP: DSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] spi: devicetree: add support for loopback mode
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 4/4] regulator: fixed: Properly use input_supply parameter from device tree
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] ARM: dts: omap3-igep: add mux pins for MMC device node
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 1/1] ARM: dts: omap3-igep: remove VSIM regulator
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] spi: devicetree: add support for loopback mode
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH v7 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH 1/2] spi: omap2: disable DMA requests before complete()
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: twl4030_charger seems to be broken by switch from 'notifier' to 'mailbox'.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
- From: Russ Dill <russ.dill@xxxxxxxxx>
- Re: [PATCH] ARM: dts: Add build target for omap4-panda-a4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: OMAP2420: Correct H4 board memory size
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: Add build target for omap4-panda-a4
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RESEND PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RESEND PATCH 1/2] ARM: OMAP2+: Prepare for device-tree PMU support
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RESEND PATCH 0/2] ARM: dts: Add PMU support for OMAP2+
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH 2/2] ARM: dts: OMAP2+: Add PMU nodes
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH 1/2] ARM: OMAP2+: Prepare for device-tree PMU support
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH 0/2] ARM: dts: Add PMU support for OMAP2+
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RFC] drm/lcdc: add TI LCD Controller DRM driver
- From: Daniel Vetter <daniel@xxxxxxxx>
- [PATCH] ARM: dts: OMAP2420: Correct H4 board memory size
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Rob Herring <robherring2@xxxxxxxxx>
- [PATCH 2/2] MAINTAINERS: Add an entry for omap related .dts files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] ARM: OMAP2+: Drop remaining plat/cpu.h usage where possible
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/2] few trivial omap patches
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Timo Kokkonen <timo.t.kokkonen@xxxxxx>
- Re: [PATCH 0/2] ARM: OMAP2420: Fix ethernet support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/8] arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP2: Fix a typo - replace regist with register.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RESEND] [PATCH 3.6.0- 5/6] ARM/omap: use module_platform_driver macro
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: PMU: Remove unused header
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/1] ARM: OMAP2+: omap2plus_defconfig: enable devtmpfs and automount
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 16/23] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: MUSB-HDRC Gadget driving VBUS inappropriately
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: OMAP4: clock data fixes for early 3.8-rc
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 01/23] mfd: omap-usb-host: get rid of cpu_is_omap..() macros
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 16/23] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/1] ARM: OMAP2+: omap2plus_defconfig: enable devtmpfs and automount
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH 1/1] ARM: OMAP3: igep0020: default boot status LED to On instead of Heartbeat
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [PATCH -next] ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: cpts: Fix build error caused by include of plat/clock.h
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP2+: enable devtmpfs and devtmpfs automount
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] OMAP2+: mux: Fixed gpio mux mode analysis.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP2+: enable devtmpfs and devtmpfs automount
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/7] ARM: OMAP2+: AM33XX: Enable few drivers in omap2plus_defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: OMAP2+: PMU: Remove unused header
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 1/1] ARM: OMAP2+: omap2plus_defconfig: enable devtmpfs and automount
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] OMAP2+: enable TPS65217 support in omap2plus_defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/7] ir-rx51: Handle signals properly
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] OMAP: board-files: fix i2c_bus for tfp410
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Devkit8000: Add DDC i2c_bus_num
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Devkit8000: Add DDC i2c_bus_num
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mach-omap2/board-igep0020.c: Fix reboot problem
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/1] ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [GIT PULL] ARM: OMAP2+: Timer build warnings fixes for v3.8-rc
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- [GIT PULL] ARM: OMAP2+: Timer build warnings fixes for v3.8-rc
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH REBASE 5/6] i2c: omap: wait for transfer completion before sending STP bit
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH REBASE 4/6] i2c: omap: in case of VERSION_2 read IRQSTATUS_RAW but write to IRQSTATUS
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH REBASE 1/6] i2c: omap: no need to access platform_device
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH REBASE 2/6] i2c: omap: also complete() when stat becomes zero
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH REBASE 6/6] i2c: omap: get rid of b_hw flag
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH REBASE 3/6] i2c: omap: improve 'rev' a little bit
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH REBASE 0/6] i2c: omap: misc changes
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/8] ARM: OMAP2+: PM QoS: control the power domains next state from the constraints
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
- [patch] OMAPDSS: reading past end of array in dispc_dump_regs()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: MUSB-HDRC Gadget driving VBUS inappropriately
- From: Felipe Balbi <balbi@xxxxxx>
- Re: MUSB-HDRC Gadget driving VBUS inappropriately
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: cpts: Fix build error caused by include of plat/clock.h
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- [PATCH v8 4/5] ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs
- From: Daniel Mack <zonque@xxxxxxxxx>
- [PATCH v8 2/5] mtd: omap-nand: pass device_node in platform data
- From: Daniel Mack <zonque@xxxxxxxxx>
- [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
- From: Daniel Mack <zonque@xxxxxxxxx>
- [PATCH v8 3/5] ARM: OMAP: gpmc-nand: drop __init annotation
- From: Daniel Mack <zonque@xxxxxxxxx>
- [PATCH v8 0/5] OMAP GPMC DT bindings
- From: Daniel Mack <zonque@xxxxxxxxx>
- [PATCH v8 1/5] ARM: OMAP: gpmc: don't create devices from initcall on DT
- From: Daniel Mack <zonque@xxxxxxxxx>
- crypto: omap-aes - fix a build error
- From: Alessio Igor Bogani <alessio.bogani@xxxxxxxxxxxxxxxxxx>
- [GIT PULL] fbdev changes for 3.8
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: MUSB-HDRC Gadget driving VBUS inappropriately
- From: Felipe Balbi <balbi@xxxxxx>
- Re: cpts: Fix build error caused by include of plat/clock.h
- From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
- MUSB-HDRC Gadget driving VBUS inappropriately
- From: Ian Coolidge <iancoolidge@xxxxxxxxx>
- Re: twl4030_charger seems to be broken by switch from 'notifier' to 'mailbox'.
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] OMAP GPIO - don't wake from suspend unless requested.
- From: anish kumar <anish198519851985@xxxxxxxxx>
- twl4030_charger seems to be broken by switch from 'notifier' to 'mailbox'.
- From: NeilBrown <neilb@xxxxxxx>
- no audio out on beagleboard-xm
- From: Peter Kurrasch <gtink78@xxxxxxxxxxx>
- Re: [PATCH_v2] watchdog: Convert twl4030_wdt to watchdog core
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- [PATCH 1/2] ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/2] ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/2] ARM: OMAP4: clock data fixes for early 3.8-rc
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: cpts: Fix build error caused by include of plat/clock.h
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- Re: [PATCH] OMAP GPIO - don't wake from suspend unless requested.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH v4 1/4] rtc: OMAP: Add system pm_power_off to rtc driver
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v4 0/4] pm: Add power off control
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v4 4/4] ARM: OMAP2+: omap2plus_defconfig: Enable RTC support
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v4 3/4] ARM: dts: AM33XX: Enable system power off control in am335x-bone
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v4 2/4] ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 1/8] ARM: OMAP2+: omap2plus_defconfig: Enable tps65217 PMIC
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 4/8] ARM: OMAP2+: omap2plus_defconfig: Enable tsl2550 ambient light sensor
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 5/8] ARM: OMAP2+: omap2plus_defconfig: Enable matrix keypad driver
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 3/8] ARM: OMAP2+: omap2plus_defconfig: Enable lis3lv02d accelerometer
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 7/8] ARM: OMAP2+: omap2plus_defconfig: Enable leds-gpio driver
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 6/8] ARM: OMAP2+: omap2plus_defconfig: Enable tmp275 sensor
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 0/8] ARM: OMAP2+: AM33XX: Enable few drivers in omap2plus_defconfig
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 8/8] ARM: OMAP2+: omap2plus_defconfig: Enable DCAN controller
- From: AnilKumar Ch <anilkumar@xxxxxx>
- [PATCH v2 2/8] ARM: OMAP2+: omap2plus_defconfig: Enable tps65910 PMIC
- From: AnilKumar Ch <anilkumar@xxxxxx>
- Re: [PATCH_v2] watchdog: Convert twl4030_wdt to watchdog core
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [RESEND PATCH v3 1/6] watchdog: omap_wdt: convert to new watchdog core
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [RESEND PATCH v3 1/6] watchdog: omap_wdt: convert to new watchdog core
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [RESEND PATCH v3 1/6] watchdog: omap_wdt: convert to new watchdog core
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [RESEND PATCH v3 1/6] watchdog: omap_wdt: convert to new watchdog core
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 01/23] mfd: omap-usb-host: get rid of cpu_is_omap..() macros
- From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
- [RFC] drm/lcdc: add TI LCD Controller DRM driver
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [PATCH v4 01/23] mfd: omap-usb-host: get rid of cpu_is_omap..() macros
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- cpts: Fix build error caused by include of plat/clock.h
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 1/5] ARM: CORESIGHT: Add generic lock/unlock helpers
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [RFC 3/5] ARM: CTI: Convert CTI helpers to AMBA bus driver
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RFC 1/5] ARM: CORESIGHT: Add generic lock/unlock helpers
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RFC 3/5] ARM: CTI: Convert CTI helpers to AMBA bus driver
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [RFC 1/5] ARM: CORESIGHT: Add generic lock/unlock helpers
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH 1/1] net: cpts: fix for build break after ARM SoC integration
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- Re: [PATCH 2/5] OMAPFB: simplify locking
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 1/1] net: cpts: fix for build break after ARM SoC integration
- From: Tomi Valkeinen <tomba@xxxxxx>
- Re: [PATCH v3 23/23] mfd: omap-usb-host: Don't spam console on clk_set_parent failure
- From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
- Re: [PATCH v3 23/23] mfd: omap-usb-host: Don't spam console on clk_set_parent failure
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH v4 00/23] OMAP USB Host cleanup
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v4 00/23] OMAP USB Host cleanup
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Felipe Balbi <balbi@xxxxxx>
- RE: [PATCH 01/10] ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- [PATCH] [resend] regulator: core: if voltage scaling fails, restore original values
- From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
- [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original
- From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- RE: [PATCH 01/10] ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- RE: [PATCH] usb: musb: dsps: header movement build error fix
- From: "Mohammed, Afzal" <afzal@xxxxxx>
- RE: [PATCH 01/10] ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH 01/10] ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH v7 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Rob Herring <robherring2@xxxxxxxxx>
- [RFC 4/5] ARM: dts: OMAP4: Add CTI nodes
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RFC 0/5] ARM: Add Cross Trigger Interface driver
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RFC 3/5] ARM: CTI: Convert CTI helpers to AMBA bus driver
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RFC 5/5] ARM: OMAP4: Add AMBA APB Clock
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RFC 2/5] ARM: dts: Add Cross Trigger Interface binding
- From: Jon Hunter <jon-hunter@xxxxxx>
- [RFC 1/5] ARM: CORESIGHT: Add generic lock/unlock helpers
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH] hwspinlock/core: Fix unbalanced module_get on error path
- From: Ido Yariv <ido@xxxxxxxxxx>
- [PATCH] hwspinlock/core: Add testing capabilities
- From: Ido Yariv <ido@xxxxxxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH] arm: dts: Add uart1 and uart2 to igep boards.
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Jon Hunter <jon-hunter@xxxxxx>
- [PATCH] arm: dts: Add uart1 and uart2 to igep boards.
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH v2 1/1] net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH v2 0/3] gpio: twl4030: Correct status reporting for outputs
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 2/2] OMAPDSS: DISPC: remove dispc fck uses
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 1/2] OMAPDSS: DISPC: get dss clock rate from dss driver
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v2 0/3] gpio: twl4030: Correct status reporting for outputs
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- [PATCH] regulator: core: if voltage scaling fails, restore original
- From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
- [PATCH] regulator: core: if voltage scaling fails, restore original voltage values
- From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
- Re: [PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- Re: [PATCH] OMAP: add pwm driver using dmtimers.
- From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] mtd: devices: elm: Add support for ELM error correction
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH v2 0/3] gpio: twl4030: Correct status reporting for outputs
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 07/12] ARM: OMAP2+: PM: use power domain functional state in stats counters
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [PATCH 06/12] ARM: OMAP44xx: PM: convert to use the functional power states API
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP2+: PM: introduce power domains functional states
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [PATCH 05/10] ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 3/5] ARM: kernel: update cpu_suspend code to use cache LoUIS operations
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH 05/12] ARM: OMAP3xxx: PM: convert to use the functional power states API
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [PATCH 06/10] ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [PATCH 02/12] ARM: OMAP2+: PM: introduce power domains functional states
- From: Vaibhav Hiremath <hvaibhav@xxxxxx>
- Re: [PATCH 09/12] ARM: OMAP2+: powerdomain: skip register reads for powerdomains known to be on
- From: Vaibhav Hiremath <hvaibhav@xxxxxx>
- Re: [PATCH 09/10] ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
- From: Vaibhav Hiremath <hvaibhav@xxxxxx>
- Re: [PATCH 05/10] ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code
- From: Vaibhav Hiremath <hvaibhav@xxxxxx>
- Re: [PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH 01/10] ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH v7 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
- From: Daniel Mack <zonque@xxxxxxxxx>
- [PATCH 1/2] spi: omap2: disable DMA requests before complete()
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 2/2] spi: devicetree: add support for loopback mode
- From: Felipe Balbi <balbi@xxxxxx>
- Re: kexec: cpufreq: omap3: hangs in dpll3xxx.c::_omap3_dpll_write_clken()
- From: Paolo Pisati <p.pisati@xxxxxxxxx>
- Re: kexec: cpufreq: omap3: hangs in dpll3xxx.c::_omap3_dpll_write_clken()
- From: Paolo Pisati <p.pisati@xxxxxxxxx>
- Re: [PATCH 01/10] ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
- From: Vaibhav Hiremath <hvaibhav@xxxxxx>
- Re: [PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
- [PATCH] OMAP: add pwm driver using dmtimers.
- From: NeilBrown <neilb@xxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]