Hi Tony, On 01/03/2013 12:49 PM, Peter Ujfalusi wrote: > Hi, > > The pwm-leds driver update is going for 3.9: > https://lkml.org/lkml/2012/12/21/99 > > This series will make sure that in 3.9 we are going to have working LEDs and > backlight on these boards. > > As a note: 4430SDP never had working backlight and the charger led did not > worked for couple of releases already due to wrong pwm_id. > > On BeagleBoard we will be able to adjust the brighness of pmu_stat LED instead > of full on/off. > > Zoom2 will have working keypad light and the backlight will be moved to be > handled by the generic pwm-backlight driver. > > This series will also fix a compile error in board-zoom-display.c caused by the > changes in twl-core - which I missed :( > > The DT support for these are going to be sent later. > > Tony: can you apply this - if it looks OK - so it will hit linux-next before the > second batch of twl-core update? The series has been generated on top of my previous series for audio support update of omap-twl4030: http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg82615.html I can regenerate this without the depending series if you prefer that way. > > Regards, > Peter > --- > Peter Ujfalusi (3): > ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight > ARM: OMAP: omap3beagle: Use the pwm_leds driver to control the PMU_STAT led > ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight > > arch/arm/mach-omap2/board-4430sdp.c | 31 ++++++++++++++- > arch/arm/mach-omap2/board-omap3beagle.c | 39 +++++++++++++++---- > arch/arm/mach-omap2/board-zoom-display.c | 56 ---------------------------- > arch/arm/mach-omap2/board-zoom-peripherals.c | 53 +++++++++++++++++++++++++- > 4 files changed, 113 insertions(+), 66 deletions(-) > -- Péter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html