On Fri, 14 Dec 2012 11:36:59 +0200 Felipe Balbi <balbi@xxxxxx> wrote:
> Hi,
>
> On Fri, Dec 14, 2012 at 08:04:27PM +1100, NeilBrown wrote:
> > this commit:
> >
> > commit c9721438c009adf8e81d376839ed037c53b9b8d9
> > Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> > Date: Fri Jun 22 17:40:52 2012 +0530
> >
> > usb: musb: twl: use mailbox API to send VBUS or ID events
> >
> > The atomic notifier from twl4030/twl6030 to notifiy VBUS and ID events,
> > is replaced by a direct call to omap musb blue.
> >
> > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> > Signed-off-by: Felipe Balbi <balbi@xxxxxx>
> >
> >
> > Seems to have broken twl4030_charger.c.
> > This code relies on the notifier to know when the USB has been plugged in and
> > so it should consider enabling the charger.
> >
> > now that the notification has gone, the charger never turns on.
> >
> > If I put the atomic_notifier_call_chain() calls back in, then the charger is
> > activated as appropriate.
> >
> > What is the plan here? Should the calls go back, or is there some way for
> > twl4030_charger to hook into the "mailbox"? Or is there some other way it
> > should work?
>
> hmmm, tricky situation. Maybe we add back the notifer calls but keep the
> mailbox API ?
>
Maybe. This is my current patch. I'm not entirely confident about the
mapping from omap_musb_vbus_id_status to usb_phy_events.
Thanks,
NeilBrown
From ffafe1fe4da3c848631c082f70745017c03e23bf Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@xxxxxxx>
Date: Sat, 15 Dec 2012 10:35:37 +1100
Subject: [PATCH] twl4030-usb - re-instate event notifications
commit c9721438c009adf8e81d376839ed037c53b9b8d9
usb: musb: twl: use mailbox API to send VBUS or ID events
went a bit too far in removing all event notification
from twl4030-usb. The notifications are still needed for
twl4030_charger.c to know when to enable the charger.
Signed-off-by: NeilBrown <neilb@xxxxxxx>
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index f0d2e75..15733f9 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -38,6 +38,7 @@
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
+#include <linux/notifier.h>
#include <linux/slab.h>
/* Register defines */
@@ -388,6 +389,28 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
}
}
+static void do_notify(struct twl4030_usb *twl,
+ enum omap_musb_vbus_id_status status)
+{
+ enum usb_phy_events event;
+
+ switch (status) {
+ case OMAP_MUSB_UNKNOWN:
+ event = USB_EVENT_NONE; break;
+ case OMAP_MUSB_ID_GROUND:
+ event = USB_EVENT_ID; break;
+ case OMAP_MUSB_ID_FLOAT:
+ event = USB_EVENT_NONE; break;
+ case OMAP_MUSB_VBUS_VALID:
+ event = USB_EVENT_VBUS; break;
+ case OMAP_MUSB_VBUS_OFF:
+ event = USB_EVENT_NONE; break;
+ }
+
+ atomic_notifier_call_chain(&twl->phy.notifier, event,
+ twl->phy.otg->gadget);
+}
+
static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
{
if (twl->asleep)
@@ -514,6 +537,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
twl4030_phy_suspend(twl, 0);
else
twl4030_phy_resume(twl);
+ do_notify(twl, status);
omap_musb_mailbox(twl->linkstat);
}
@@ -537,6 +561,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl)
twl->asleep = 0;
}
+ do_notify(twl, status);
omap_musb_mailbox(twl->linkstat);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -634,6 +659,8 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");
+ ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
+
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
*
Attachment:
signature.asc
Description: PGP signature
